• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.859-864
• /
• 2001

For earthquake resistance design, a response modification factor is used to reduce the design strength and it reflects ductility, reserve strength, redundancy and damping effect. But this factor has not theoretical basis. In this study, two response modification factors are compared and analyzed for shear wall apartment building.; the one is introduced by ATC-19 Procedures, the other is suggested FEMA-273 and ATC-40 through nonlinear static analysis. For the results, ATC-19 procedure gives a reasonable estimation to R factor. But $R_{u}$ by using FEAM-273 and ATC-40 methods is estimated so small in case of a minor or moderate earthquake region. Due to this fact, response modification factor is smaller than suggested load criterion 3.0. So, it needs to decrease wall volume and reduce the global strength and system stiffness for proper ductile behavior matching to domestic load criterion.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.724-731
• /
• 2001

스크린 인쇄법에 의해 Si 기판에 PZT 후막의 제조에 있어서 주요 문제점은 낮은 소결밀도 및 PZT 후막과 Si 기판과의 반응현상이다. 이러한 현상을 억제하기 위해 본 연구에서는 스크린 인쇄법 및 PZT sol-gel 처리법의 혼합된 방법을 채택하여 Pt/TiO$_2$/YSZ/SiO$_2$/Si(100) 기판에 Zr/Ti 비가 52/48인 PZT 후막을 제조하였으며, 소결온도에 따른 잔류분극(P$_{r}$), 유전상수($\varepsilon$$_{r}$) 및 압전상수(d$_{33}$)를 측정하였다. 인쇄된 PZT 후막에 졸 처리함으로써 단순히 인쇄된 후막에 비해 전기적 특성이 증진된 결과를 얻었다.다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.626-630
• /
• 2006

This study investigates the effects of Interaural Cross-correlation(IACC) and its variation on annoyance of the heavy-weight impact sounds. Subjects evaluated the annoyance of the heavy-weight floor impact sounds recorded in rooms of apartments which have different sound insulation treatments; furnished and occupied conditions are characterized by the ACF/IACF factors. A paired comparison test was conducted using the impact sound sources whose IACC and variation of IACC values were different. It was found that IACC is inversely correlated with the scale value(r=-0.62) whereas the variation of IACC is not(r=-0.34). On the contrary, ${\Phi}(0)$ is highly correlated with scale value of annoyance and ${\Phi}(0)$ is need to be controlled as constant to find the effect of IACC on annoyance.

• Elastomers and Composites
• /
• v.22 no.4
• /
• pp.305-313
• /
• 1987

In this study, as one of the developing ways of the functional elastomer, improvement of the functionality of 1-Chlorobutadiene-Butadiene Copolymer(CB-BR) was attempt through curing reaction by moisture. The curing reaction of CB-BR was determined an use of $\gamma$-Aminopropyltriethoxysilane(APS) and $\gamma$-Aminopropylmethyldiethoxysilane(ADS) as a crosslinking agent with filler at so the uncrosslinked elastomer was exposured in the air and curing reaction by moisture in the air was studied. The results obtained are as follows. 1. APS was more efficient than ADS as a crosslinking agent for CB-BR 2. Optimum amount of APS for moisture cured elastomer was r=1.5(at the ratio of $[APS]/[Cl^*]$) also in case(r=1.5), elastomer formed after soaking $T_{72}$ had similar physical properties with elastomer crosslinked by sulfur and it was very good. 3. Uncrosslinked elastomer(CB-BR+APS+Silica) was easily crosslinked by exposure to the air, and the physical properties was also satisfactory.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.753-759
• /
• 1998

In physical and reactive extraction of acrylic acid using various solvents the equilibrium characteristics of extraction were investigated. The degree of extraction in reactive extraction with Tri-n-octylamine(TOA) was 1.5~3 times than that in physical extraction. Distribution ratio was constant in methyl isobutyl ketone(MIBK) and n-butylacetate(n-BAc) but was increased with increasing the concentration of acrylic acid in benzene and chloroform. It can be explained by formation of dimers. Maximum extraction leadings of acrylic acid were three in benzene and were two in MIBK, chloroform and n-BAc, and it was found that acrylic acid was extracted as the form of $A_3$R In benzene and $A_2R$ in MIBK, chloroform and n-BAc. In effect of solvent, the degree of extraction was increased as he difference of solubility parameter of solvent and solute was decreased, and as dielectric constant of solvent was increased.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.41-42
• /
• 2017

기존의 다중 코일을 이용한 소형 자성체를 제어하는 시스템에서 전류 벡터 지령은 구동 매트릭스의 pseudo-inverse를 사용하여 계산되었다. 본 논문에서는 기존의 전류 지령에 null space 전류 벡터 지령을 더하는 방법을 이용하여 현재 전류 벡터값과 목표 전류 벡터 지령 사이의 전류 변화량이 최소화 되는 전류 지령 수정 방식을 제안한다. 제한된 전압 정격 내에서 제안된 방식을 적용할 경우 전류 지령 벡터값에 도달하는 시간이 짧아짐으로, 기존 방식에 비해 빠른 반응성을 얻을 수 있다. 제안된 방법은 Matlab(R) Simulink(R)를 통해 검증하였다.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.25-31
• /
• 1997

The variations of gas hold-up, overall volumetric oxygen mass transfer coefficients and liquid circulation velocity in an internal loop reactor were investigated to manifest scale-up effect. The relationship between superficial gas velocity and gas hold-up were found as Ugr = 0.045 $\varepsilon$r in the pilot-scale and Ugr = 0.056 $\varepsilon$r in the bench-scale reactor. The overall volumetric oxygen mass tractsfer coefficient, KLa was slightly increased in the pilot-scale than in the bench-scale reactor. Flow regime was changed from the bubble flow to the churn-turbulent flow when the superficial gas velocity reached to 3.5 - 4 cm/sec in the pilot-scale.

• KSBB Journal
• /
• v.30 no.2
• /
• pp.53-57
• /
• 2015

In this study, the production of total reducing sugar from macro green-algae Enteromorpha intestinalis by enzymatic hydrolysis was investigated. As a result of enzymatic hydrolysis using 13 kind commercial enzymes, the highest yield of 8.75% was obtained from Viscozyme L, which is multi-enzyme complex such as cellulase, arabanase, beta-glucanase, hemicellulase and xylanase. As a control, only 0.33% and 0.27% yield were obtained from 1% sulfuric acid and 0.05 M citrate buffer (pH 4.8), respectively. In the case of enzyme mixture, the mixture of $Viscozyme^{(R)}$ L and $Cellic^{(R)}$ CTec2 (1:1) was presented the highest yield of 10.67%. Finally, the 14.99% yield was obtained at 36 hr under the condition of 10% biomass and 30% enzyme mixture.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.13-20
• /
• 1995

To develope a high precision TiAIN thin film resistor, TiAIN films were deposited on A1$_{2}$03 substrates by reactive planar magnetron cosputtering from Ti and Al targets in an Ar-N$_{2}$ atmosphere. The characteristics of the TiAIN thin film were controlled by changing of the R.F. power on Ti and Al targets, and the N$_{2}$ partial pressure. The high precision TiAIN thin film resistor with TCR(Temperature Coefficient of Resistance) of less than 10ppm/.deg. C was obtained under the R.F. power condition of 160(w)/240(w) to Ti and Al targets at the N$_{2}$ partial pressure of 7*10$^{-5}$ Torr. The composition of these films were investigated by XRD, SEM and EDS.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.81-87
• /
• 1997

일본잎갈나무잎을 채취하여 아세톤 : 물 (7 : 3, v/v) 의 혼합용액으로 추출한 후 에틸아세테이트용성 화합물과 수용성 화합물로 분리하였으며 Sephadex LH-20으로 충진한 칼럼을 사용하여 화합물을 단리 하였다. 단리 화합물을 확인하기 위하여 셀룰로오스 박층 크로마토그래피(TLC)를 실시한 후 자외선 램프 하에서 관찰하였다. 바닐린 발색제를 분무히여 정색반응을 조사하고 $R_r$ 값을 구하였다. 단리된 화합물들의 구조는 $^1H$-NMR과 $^{13}C$-NMR 스펙트럼을 이용하여 그 구조를 규명하였으며 에틸아세테이트용성 화합물에서는 (+)-catechin, (-)-epicatechin, kaempferol-O-arabinofuranoside와 kaempferol-3-O-arabinopyranoside, 수용성 화합물에서는 apigenin-8-C-rhamnosyl-($1"'{\rightarrow}2"$)-glucoside(2"-O-rhamnosylvitexin)을 단리 하였다.