• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.165-170
• /
• 2012

Purpose: The aim of this study was to measure and evaluate changes of visual responses in viewing a 2D and 3D (three-dimensional) image. Methods: The subjects were 44 college students aged 19 to 25 years with normal binocular vision. The visual responses measured were CA/C (convergence accommodation/convergence) ratio, convergence-induced PD(interpupillary distance), accommodative responses, perceived distance in viewing a 3D image. Results: Convergence and accommodative responses in viewing the 3D image were significantly larger (p<0.05) than in 2D. A moderate positive correction was found between CA/C ratio and accommodative response (r = 0.477, p = 0.001). It was indicated that smaller PD had larger depth perception. Convergence in viewing the 3D image was significantly larger (p<0.05) than that at cognitive distance. Conclusions: The visual fatigue may be more intense in larger CA/C ratio and smaller PD when viewing 3D images.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.604-608
• /
• 2014

This study investigated influence of dissolved organic nitrogen (DON) in natural organic matter (NOM) on the formation of organic chloramines upon monochloramination. Ratios of dissolved organic carbon (DOC) to DON of the 16 NOM isolates ranged from 7 to 47 mg-C/mg-N. Levels of organic chloramines maxed in 24 hours at $0.16mg-Cl_2/mg-N$ in average. The yields were relatively lower, but decay of organic chloramines were slower than those upon chlorination. Organic chloramines formed upon monochloramination decreased by 56% in average in 120 h. NOM with lower DOC/DON ratios formed more organic chloramines. NOM fractions such as hydrophobic, hydrophilic, transphilic, and colloidal did not significantly impact formation of organic chloramines. As the monochloramine doses increased, more organic chloramines were produced ($R^2=0.91$). Overestimation of disinfection capacity due to the formation of organic chloramines may not be concerns for monochloramine systems since only 6% of monochloramine could be converted to organic chloramines upon monochloramination of NOM.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.209-214
• /
• 2018

In this paper, the techno-economic analysis of glycerol steam reforming for $H_2$ production capacity of $300m^3\;h^{-1}$ was carried out. The process of glycerol steam reforming was constructed by using Aspen $HYSYS^{(R)}$, a commercial process simulator, and parametric studies for the effect of the operating temperature on $H_2$ production was performed. Moreover, the economic analysis was conducted through an itemized cost estimation, sensitivity analysis (SA) and cash flow diagram (CFD), and the unit $H_2$ production cost was 5.10 $ ${kgH_2}^{-1}$ through the itemized cost estimation of glycerol steam reforming for $H_2$ production capacity of $300m^3\;h^{-1}$. SA was employed to identify key economic factors and various economic indicators such as net present value (NPV), discounted payback period (DPBP), and present value ratio (PVR) were found according to $H_2$ selling price using CFD.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.455-459
• /
• 2013

The fuel processor for the portable fuel cell includes multi-step processes consisting of hydrogen generator, heat generator and several CO clean-up stages. One of requirements of the fuel processor for portable fuel cell system is a rapid start-up time. Especially, the warm-up time for WGS reactor is crucial factors for total start-up time. In this paper, active heating protocol, which is the heating protocol of WGS reactor supplied by the oxidation of CO rich reformate in the initial stage, is used for a rapid start-up. The air stream fed to the inlet of WGS reactor rapidly oxidize the CO rich reformate in the WGS reactor. Therefore, CO concentration in reformate quickly stabilized at the desired concentration without CO surges.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.3-10
• /
• 1999

Kinetics of solution photopolymerization of acrylonitrile(AN) with sensitizer, such as $NaSCN,\;KSCN,\;Ba(SCN)_2,\;NH_4SCN,\;ZnCl_2$ and $Na_2SeO_3$, were studied using UV crosslinker at various monomer concentrations($1.8{\sim}7.58mo1/1$), sensitizer concentrations($10{\sim}60%$), reaction temperature($10{\sim}70^{\circ}C$), energy intensities($1,000{\sim}9,900{\mu}J/cm^2$) at isothermal condition under nitrogen atmosphere. Under the irradiation of high pressure mercury lamp(${\lambda}=365nm$). High conversion and uniform molecular weight were obtained compare to thermal polymerization at reaction temperature of $50^{\circ}C$, reaction time of 3hr and 50% NaSCN without any initiator. Their kinetic model was as follows : $R_p=0.0142[M]^{0.82}[I]^{0.49}[S]^{0.52}$ exp(-1.33/RT).

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.956-960
• /
• 1998

The interfacial reaction between the CoINb bilayer and the $SiO_2$ substrate in the temperature range of $330^{\circ}C$-$800^{\circ}C$ in a vacuum has been investigated by X-ray photoelectron spectroscopy, glancing angle XRD, Auger Electron Spectroscopy and Atomic force microscopy. The Co and Nb were actively interdiffused at $600^{\circ}C$, and the layer inversion completed at $700^{\circ}C$. NbO was formed by interfacial reaction between the Nb interlayer and the $SiO_2$ substrate, while $Nb_20_5$ was formed on the surface by reaction of Nb with oxygen in the ambients. Free Si atoms obtained by the reaction between Nb and $SiO_2$ formed silicides like CoSi and $Nb_5Si_3$ by reacting with Co and Nb remnants. The sheet resistance of the Co/Nb bilayer increased substantially after annealing at $800^{\circ}C$. which is due to the agglomeration of the Co layer to reduce its surface energy.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.82-90
• /
• 2019

The Box-Benhken Design (BBD) model of response surface methodology (RSM) was used to optimize fluoride adsorption conditions in water using a 350℃ thermally treated cow bone. Water temperature, pH, contact time, and initial fluoride concentration were selected as variables to be optimized. A second order reaction equation was obtained from a Box-Behnken Design DoE experimental matrix of 29 runs. R² and p-value of the model were 0.9242 and <0.0001, respectively, indicating that the selected variables had a very substantial effect on the adsorption results. The optimized adsorption capacity of the thermally synthesized bone char was estimated to be 6.46 mgF/g at the water temperature of 39.68℃, pH 6.25, contact time of 88.81 minutes and an initial fluorine concentration of 14.64 mgF/L.

• Restorative Dentistry and Endodontics
• /
• v.29 no.1
• /
• pp.23-29
• /
• 2004

최근 근관 치료 영역에서는 적절한 기계적 근관 성형과 근관 세척으로만 효과적으로 근관 내 미생될의 숫자를 감소시킬 수 있어 다른 약제의 사용은 권장되고 있지 않다. 그럼 에도 불구하고 수종의 근관내 약제는 감염된 근관에서 미생물의 숫자를 줄이고 근관 내용물의 불활성화와 삼출액을 줄이기 위해 사용되고 있다. 그 중 포름 알데하이드를 함유하고 있는 Depulpin$^{(R)}$과 근관 치료학에서 오랫동안 널리 사용되어온 수산화 칼슘을 포함하고 있는 Tempcanal$^{(R)}$과 Vitapex$^{(R)}$ 등에 대한 세포 독성은 충분한 연구가 이루어지지 못한 상태이다. 이에 본 연구에서는 이들 약제가 백서에서의 세포 독성에 미치는 영향에 관하여 고찰하고자 하였다. Sprague-Dawley계 백서 숫놈 20마리를 사용하여, 각각의 쥐는 케타민과 럼푼을 근육내 주사하여 마취하였고, 복부의 피하 부위를 절개한 뒤 3개씩의 Teflon-coating된 매식체를 삽입하였다 매식체 안에는 각각 Tempcanal$^{(R)}$, Vitapex$^{(R)}$, Depulpin$^{(R)}$을 넣고, 백서 20마리를 6개군으로 나누어 매식체 삽입 후 1주 뒤, 4주 뒤에 희생시켜 매식체 주위 조직을 잘라내고 10%포르말린에 고정 후 파라핀에 포매 하였다 미세 절단기로 4$\mu$m로 연속 절단 후, hematoxy-line-eosin염색 후 3명의 관찰자가 광학 현미경으로 관찰하여 염증의 정도를 4단계로 평가한 뒤 Kruskall-Wallis test(P<0.05)로 통계 처리하였다. 그 결과 제 1군Tempcanal$^{(R)}$ 7일후 군), 제 2군(Vitapex$^{(R)}$ 7일후 군), 제 3군(Depulpin$^{(R)}$ 7일후 군) 모두 중등도의 염증도를 보였으나, 세 군간의 통계학적 유의성은 없었다. 그러나, 제 4군(Tempcanal$^{(R)}$ 30일후 군)과, 제 5군(Vitapex$^{(R)}$ 30일후 군)의 경우에서는 약한 염증도를 보여주었으나, 제 6군(Depulpin$^{(R)}$ 30일후 군)은 가장 심한 염증 반응과 함께 조직 괴사의 양상을 보여주었으며, 4, 5군과 6군간에 통계학적 유의성을 보였다. 본 실험 결과, Depulpin$^{(R)}$은 Tempcanal$^{(R)}$와 Vitapex$^{(R)}$에 비해 높은 세포 독성을 보여주공 있으나, 좀 더 많은 임상적 검증이 필요할 것으로 사료된다.

• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.7-11
• /
• 2007

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.715-723
• /
• 2007

A displacement-based seismic design procedure was proposed for mid-to-low-rise steel moment frames. The proposed method was totally different from the current R-factor approach in that it directly uses available connection rotation capacity as a primary design variable. To this end, the relationship between available connection rotation capacity and seismic response modification (R factor) was established first; this relationship has been a missing link in current ductility-based design practice. A step-by-step displacement-based iterative design procedure was then proposed and verified using inelastic dynamic analysis.