• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.43-52
• /
• 2000

Hemifacial microsomia ( HFM ) is the second most common craniofacial abnormalies. HFM represnted a spectrum of clinical findings such as hypoplasia of the mandibular ramus and condyle, confinement of maxilla growth, external and/or middle ear defects, involvement of some cranial suture, buccal soft tissue, facial nerve, and muscles in the affected side. HFM often showed progressive facial asymmetry and occlusal plane slanting to the affected side with growth. There were several reports about asymmetry of tooth maturation, hypodontia, delayed eruption, enamel hypoplasia in HFM. Since teeth develope in close association with size and morphology of the maxillary and the mandible, it is highly likely that dental changes will be present in HFM. So the Purpose of this study was to investigate the differences of the primary and the permanent teeth dimensions in the maxillary and the mandibular dentition between the affected and the non-affected side of HFM.. The sample of this study consisted of 34 unilateral HFM Patients (18 males and 16 females, average age : 5 year 11 months old). The authors examined the mesiodistal and the faciolingual dimensions of the primary and the permanent teeth and performed statistical study by using paired t-test. The results were as follows 1. The mesiodistal dimensions of the mandibular second primary molar and the mandibular first permanent molar in the affected side of HFM were significantly smaller than those of non-affected side. But there were no significant differences in the anterior teeth and the mandibular first primary molar. It means that a gradient of severity from anterior teeth to posterior teeth was found in the mandibular dentition. 2. Although there were no significant differences in the faciolingual dimensions of the primary and the permanent teeth in the maxillary and the mandibular dentition between the affected and non-affected side of HFM, there were general trend of compensatory increase in faciolingual dimension of the mandibular primary and the permanent teeth in the affected side Therefore these results showed that HFM might affect on the abnormality of tooth dimension, especially the most posterior teeth, in the affected side of the mandible.

• 대한치과교정학회:학술대회논문집
• /
• 2000.11a
• /
• pp.37.2-37.2
• /
• 2000

• The Journal of the Korean dental association
• /
• v.31 no.8 s.291
• /
• pp.558-559
• /
• 1993

• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.2
• /
• pp.77-91
• /
• 2004

본 연구의 목적은 반안면왜소증 환자의 하악골 신장술시 초기 치아골격 특성들 중에서 치료결과의 차이에 기여하는 인자를 찾는 것이다. 치료전의 치아골격 특성, 골신장술의 효과와 그 유지상태를 관찰하기 위하여 골신장술 직전(T0), 직후(T1), 추적 2년후(T2)에 측모와 정모 두부방사선 계측사진을 촬영하여 전후방, 수직치아, 비대칭 항목들을 계측하였다. T2 시기의 계측 결과에 따라서 환자들을 1군(양호군, 10명)과 2군(불량군, 9명)으로 분류하였다. 두 군에서 각 시기와 T0-T1, T1-T2 동안의 변화량의 차이를 Mann-Whitney U test, Wilcoxon signed independent t-test, rank test, ANOVA test를 사용하여 분석하였다. pruzansky type이 골신 장술의 성공과 실패 여부와 관계가 깊게 나타났다. T0 시기에 2군은 1군에 비하여 하악골이 후방위치되었고, 하악지 고경(ramus height)이 짧았고, 하악각(gonial angle)이 컸으며, 이환측 하악지가 내측경사되었고, 이환측으로의 이부변위(chin point deviation)가 크게 나타났다. 1군에서 골신장술의 주요한 효과는 하악지 고경의 증가, 하악골의 전방위치, 하악각의 증가, articular angle의 감소에 따른 하약골의 반시계방향 회전, 이환측의 하악지 경사의 증가, 교합면경사와 이부변위의 개선으로 나타났다. 그러나 2군에서는 골신장술을 시행했을 때 1군에 비하여 하악골이 시계방향으로 회전되었고 하악지 고경의 증가량이 작게 나타났다. T2 시기에 2군에서는 하악골의 반시계방향 회전이 나타났고, 하악지 성장이 일어나지 않았으나, 1군은 반대의 경향을 보였다. 이러한 인자들이 골신장술 결과의 차이에 기여하는 것으로 생각된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.82-87
• /
• 1991

Hemifacial microsomia is a term used to describe a facial anomalies caused by the defect of anatomic structures originated from the first and the second branchial arches. The defect area encompasses some facial areas including mandible, facial muscles, masticatory muscles, cranial nerves, auricles, etc., and the degree of manifestations of the anomalies is extmely diverse. A 20-year-old man complaining of facial asymmetry and malocclusion visited our hospital. An orthognathic surgery was performed for the correction of hard tissue anomalies and then autogenous dermis-fat autotransplantation was done for the improvement of remaining soft tissue defect. The result was esthetically good and the case was presented here.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.351-358
• /
• 2010

A 31-year-old woman with hemifacial microsomia presented to the Department of Oral and Maxillofacial Surgery, Seoul National University Dental Hospital. The patient was previously treated with distraction osteogenesis device to elongate right maxilla and mandibular ramus. But, the result was not satisfactory, to correct residual facial asymmetry due to hemifacial microsomia we planned costochondral graft for reconstruction of ramus and condyle, Le Fort I osteotomy and sagittal split ramus osteotomy for facial asymmetry. The right mandibular condyle and ramus was reconstructed with right eleventh costochondral graft via submandibular approach. Using costochondral graft and orthognathic surgery the facial asymmetry in hemifacial microsomia patient was corrected. 1-stage treatment consists of costochondral graft and orthognathic surgery can achieve function and esthetics at the same time, is timesaving to both patient and surgeon.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.6
• /
• pp.526-531
• /
• 2005

Distraction osteogenesis is a technique of bone lengthening by gradual movement and subsequent remodeling. Distraction forces applied to bone also create tension in the surrounding soft tissues, distraction histiogenesis. Distraction osteogenesis is used to correct facial asymmetry, such as patients with hemifacial microsomia, maxillary or mandibular retrusion, cleft lip & palate, alveolar defect and craniofacial deficiency. Hemifacial microsomia is characterized by unilateral facial hypoplasia, often with unilateral shortening of the mandible and subsequent malocclusion. This report describes two cases of hemifacial microsomia(type IIB). In these two cases, distraction osteogenesis was used to correct a facial asymmetry. Two patients underwent unilateral mandibular distraction osteogenesis of ascending ramus of the mandible with extraoral devices. Successful distraction osteogenesis was achieved in the patients with hemifacial microsomia.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.3
• /
• pp.207-216
• /
• 1992

The congenital condition referred as hemifacial microsomia is characterized by underdevelopment, malformation or abscence of certain soft and hard tissue derivatives of the first and second branchial arches and open also of structures which are not derived from the branchial arches, such as the zygoma, temporal bone. This is a report about a 14 years old male patient with the chief complaint of severe facial asymmetry, who was diagnosed as hemifacial microsomia having agenesis of the right mandibular condyle and zygomatic arch. Deformities and rib bone graft on the affected mandibular condyle and body, and LeFort I osteotomy in the maxilla. To correct contour-deficient chin, we performed the genioplasty, and the zygomatic arch was reconstructed with rib bone graft.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.447-453
• /
• 2010

The hemifacial microsomia is characterized by variable underdevelopment of the craniofacial skeleton, external ear, and facial soft tissues. So, patients with hemifacial microsomia have an occlusal plane canting and malocclusion with facial asymmetry. Distraction osteogenesis (DO) with an intraoral or extraoral device is a technique using tension to generate new bone with gradual bone movement and remodeling. DO has especially been used to correct craniofacial deformities such as a hemifacial microsomia, facial asymmetry, and mandible defect that could not adequately be treated by conventional reconstruction with osteotomies. It has a significant advantage to lengthen soft and hard tissue of underdeveloped site without bone graft and a few complication such as nerve injury or muscle contracture. A 13-years old girl visited our clinic for the chief complaint of facial asymmetry. She had a left hypoplastic maxilla and mandible, occlusal plane canting and malocclusion. We diagnosed hemifacial microsomia and lanned DO to lengthen the affected side. Le Fort I osteotomy, left mandibular ramus and symphysis osteotomy were performed. The internal distraction devices fixed with screw on maxillary and mandibular ramus osteotomy sites. External devices were adapted to lower jaw for DO on symphysis osteotomy site and to upper jaw for rapid maxillary expansion (RME). At 7days after surgery, distraction was started at the rate of 1mm per day for 13days, and after 4months consolidation periods, distraction devices were removed. Simultaneous multiple maxillo-mandibular distraction osteogenesis with RME resulted in a satisfactory success in correcting facial asymmetry as well as occlusal plane canting for our hemifacial microsomia.