• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.6-12
• /
• 2010

Fiber optic sensor using fiber Bragg grating(FBG) probes is used for monitoring strain and temperature distributed on the wide surfaces of large structures. In this paper, in order to use many FBG probes in one optical fiber line, we propose a complex multiplexing technology which is composed of two techniques, one is time division multiplexing and another is wavelength division multiplexing. However, we only investigate the characteristics of time division multiplexing because FBG sensors basically can be operated by wavelength division multiplexing. We calculate the optimal reflectivities and the lengthwise location of five FBG probes in serial connection in order to obtain the unique reflected intensities from the FBG probes. We fabricate five FBG probes with the reflectivities of 13%, 16%, 25%, 40% and 80%, which are determined by the theoretical calculation, and observe the signal reflected from each FBG in the time domain from the experiment. There are differences between experimental and theoretical results caused by the signal noise and the differences of reflectivities of FBG probes. But the experimental results shows the reflected signals of five FBG probes which prove the availability of complex multiplexing.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.75-78
• /
• 2005

The detectability of radar depends on RCS(radar cross section). The RCS for complex radar targets may be only approximately calculated by using low-frequency or high-frequency scattering methods, while the RCS for simple radar targets can be exactly obtained by applying on eigen-function method. However, the conventional methods for calculation of RCS are computationally complex. We propose an radar signal model for RCS calculation by MUSIC algorithm In this research, it is assumed that the radar target is considered as a ring of scatterers. The amplitudes of scatterers may be statistically distributed. As the result, the radar signal model is proposed to use MUSIC, and the RCS is calculated by a simple linear algebraic method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.160-166
• /
• 2012

We performed the development and performance evaluation of reflective type heart rate measurement system for PAPS. We used chip LED and chip photo TR. for low power driving. The measured PPG signal is preprocessed using high pass filter and low pass filter, and the preprocessed signal is displayed by LabVIEW. Also LabVIEW include the algorithm that extract effective signal and calculate the heart rate. We made sure that it will be able to apply to measurement equipment with high accuracy and repetition from exercising subject using this system and algorithm.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.95-104
• /
• 2002

The theoretical and analytical studies on dynamic signals(force and acceleration signals) measured at SPT rod are actively made. In this paper, the characteristics of stress wave(force signals) in SPT rod were studied experimentally using model rod system. It was noted that the amplitude ratios of reflected wave over incident wave in different end conditions were well matched with theoretical results. The impedance of soil could be determined if the characteristics of incident and reflected waves could be evaluated quantitatively in situ SPT test. On the other hand, the results of model tests showed that the effect of reflected wave caused by side friction was negligible, and therefore, the analysis model considering only end resistance of sampler could be applicable in dynamic analysis of SPT.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.83-87
• /
• 2004

본 연구는 고해상도의 충적층 지하수위 분포 조사를 위한 탄성파 굴절법 조사 방법을 소개하고 부여 군수리 충적층 일대에서 이 기법을 통해, 획득된 실제 충적층내의 지하수위 조사 결과를 제시한다. 기본적으로 본 연구에서 활용된 연속 굴절파 중합 방식은 동일 공심점(common mid point, 이후 CMP)을 갖는 굴절파 신호를 취합하고, 이격 거리(offset)에 대한 시간 지연 효과 보정을 수행한 후, 이들 신호를 중합하여, 충적층의 지하수위면에서 굴절된 신호를 보다 뚜렷이 부각시켜 정확한 지하수위 정보를 획득 하는 방식으로 일명 CMP 굴절법이라고도 한다. 이 방식은 독일에서 최초 개발되었으나(Gebrande, 1986; Orlowsky 등, 1998), 국내에서 적용되기는 본 연구가 최초이다. 이러한 탄성파의 굴절 신호를 사용하는 방식은 우선, 기존의 일반적인 고해상도 반사법 탐사에서 잡음으로 여겨졌던 굴절파 신호를 활용할 수 있으며, 고해상도 반사법 탐사와 동일한 배열과 운영 방식으로 획득된 자료에서 원하는 정보를 획득할 수 있으므로, 고해상도 반사법에 의한 기반암 조사와 함께 적용될 경우, 정화한 충적 대수층의 분포를 조사할 수 있게 하여주는 획기적인 조사 신기술이다. 개발된 기법은 부여 군수리 충적층 지역을 대상으로 적용되었으며, 그 결과 기존의 어떠한 지구물리 조사 방법보다 정확하고 분명한 지하수위 분포를 보여주었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.201-204
• /
• 1998

강당, 회의실, 강의실 등과 같은 닫혀진 공간에서 포착된 소리의 질은 반향음과 간섭 잡음 등에 의해 영향을 받는다. 마이크로폰에 수신되는 신호는 직접전달파와 벽면에 의한 반사파들이 더해지므로 해서 실제 발생음을 명확히 얻기가 어렵다. 수신측 마이크로폰에서 반사음의 영향을 제거하면 실제 발생음에 가까운 양질의 소리를 얻을 수 있을 것이다. 잡음과 반향음의 영향이 큰 음향 공간에서 고음질의 소리를 얻기 위한 방법으로 마이크로폰 배열의 병렬 신호 처리 기법이 있다. 본 연구에서 제시된 마이크로폰 배열의 병렬 신호처리 기법은 공간적 음량 선택성을 제공하기 위해 각 마이크로폰 센서들의 matched filter 처리와 병렬 처리 기법을 결합한다. 이 기법은 다중경로 왜곡(반향)과 간섭 잡음을 제거하는 수단을 제공한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.819-830
• /
• 2017

An FM radio based PCL system is a passive radar technique for detecting the multiple moving targets from FM radio signals and tracking the trajectories of the targets by calculating the cross-correlation function of direct-path signal and target echo signals. However, the interference signals are received from a surveillance channel, which is designed to receive the target echo signals. Because of this problem, the target echo signals are masked by the strong interference signals and this makes it difficult to detect the true targets from the cross-correlation function. Adaptive filters are known as effective methods for suppressing the interference signals but there is a problem to present their accurate performances in the PCL system because many literatures used the cross-correlation function and the ratio of input and output power as a measure of the performance analysis. In this paper, a performance analysis method is proposed to evaluate the performance of interference cancellation algorithms. By using the property that each component of the filter weight vector is adjusted to suppress the specific interference signal, a performance measure of the interference signal suppression is defined by a function of adaptive filter weights. Based on the proposed method, we compare the performance of the adaptive filters used in the PCL system. Simulation results show that the proposed method can be very effective for evaluating the performance of interference cancellation algorithms.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.293-298
• /
• 2013

This research develops an ultrasonic sensor to measure the distance in underwater. The ultrasonic transducer transmits an acoustic signal to an object and receives the echo signal reflected from the object. The ultrasonic driver calculates a distance by multiplying the acoustic speed to the time of flight(TOF) which is the time necessary for the acoustic signal to travel from the transducer to the object. We apply a thresholding and a cross correlation methods to detect the TOF and show their results. When an echo pulse is corrupted with noise and its shape is distorted, the cross correlation method is used to find the TOF based on the maximum similarity between the reference and the delayed echo signals. The echoes used for the reference signal are achieved at the different environments, which improves the performance of the sensor. This paper describes the driver of the acoustic sensor and analyzes the performance of sensors in different measurement environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.789-798
• /
• 2021

In this study, for the purpose of collecting and analyzing target-specific RCS data of target signals simulator for verification/improvement of radar system performance, VHF band monostatic/bistatic RCS of civil aircraft(B-747, B-737) and fighter(F-16) models were analyzed by EM simulation tool. In order to reduce the RCS analysis time, the analysis time and RCS data were compared and cross-verified. Also, the analysis range was selected by examining the interpolation error according to the analysis angle resolution. The RCS data obtained for each model were analyzed separately by the incident/reflection elevation angle and frequency. The RCS characteristics according to the shape of the aircraft and the incident/reflection azimuth angle were described. Finally, the statistical RCS distribution value of each model is presented through RCS distribution histogram analysis. In the future, the RCS database obtained by this study will be used for the target signals simulator of the VHF band radar system.