• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.101-101
• /
• 2016

하천원격탐사는 원격탐사의 하위 개념으로서 계측하고자 하는 대상인 하천이나 호소 수체에서 발생하는 빛의 반사, 복사 또는 방출되는 양을 획득하고 분석하여 수리량, 지형 등 하천 조사에 활용하는 기법이다. 일반적으로 원격탐사는 주로 위성영상 자료를 활용하여 수행되어 자료취득비용이 고가이고 해외 위성자료에 의존하여 시공간적인 해상도가 매우 낮아 유역에 비해 공간적인 규모가 작고 변동 시간이 짧은 하천에 적용하는 데 한계가 있어 왔다. 또한, 단순한 사진촬영으로 도출할 수 있는 정보에 한계가 있고 자료를 저장 및 분석할 수 있는 기법도 부족하여 하천조사에 원격탐사를 활용한 사례가 드물었다. 그러나, 최근 드론과 같은 운반체 기술이 획기적으로 개선되고 있고 다양한 영상촬영장비의 개발과 IT기술의 발전으로 인해 위성영상에 비해 시공간적 해상도가 매우 정밀한 자료를 저렴한 비용으로 획득 가능해졌다. 또한, 매우 조밀한 파장대로 세분된 빛의 세기를 측정할 수 있는 초분광 영상을 이용한 원격탐사기법도 하천과 같은 좁은 영역에 적용이 가능해졌다. 초분광영상은 가시광선 외에 자외선과 적외선 영역에 해당하는 반사광을 200개 이상의 조밀한 파장대로 나누어 측정할 수 있어 수리량, 하상, 식생 등 하천 수체와 관련된 정보를 조사할 가능성이 증가하였다. 본 연구에서는 하천 수체에서 취득한 초분광 영상을 이용하여 하천특성과의 상관관계를 규명하고 이를 통해 초분광 영상 기반의 하천특성 계측 기법을 개발하고자 하였다. 드론과 같은 항공영상에 적용하기 전에, 우선 지상에서 측정된 초분광 영상과 하상재료 및 수심과의 상관관계를 규명하여 초분광 영상의 하천조사로의 사용 가능성을 점검해 보았다. 폭 10m, 수심 1m의 저수심의 소하천에 적용한 결과, 초분광 영상의 표준화 및 패턴 분석을 통해 수중에 위치한 하상재료를 구분할 수 있었고 주성분분석 등을 통해 수심과 상관성도 일부 도출되어 하천조사에 초분광영상이 활용될 수 있음을 확인하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.101-105
• /
• 2001

It was measured the transmittance and the reflectance by tie dip method using the UV cut lens' UV solution. The half point and the edge wavelength of the transmittance were wry well applied to the eqution of a dip time dependence. $$W=W_0+A_1{e}{x}{p}[-(x-x_1)/t_1]$$ The half point wavelength of the transmittance shifted from 358 nm to 408 nm and the edge wavelength moved from 340 nm to 398 nm. The more dip time had long the less intensity of main reflectance peak-380 nm was small and shifted to long wavelength regions. And the component peak of UV solution began to show in dip time-10 min.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.466-470
• /
• 1997

We fabricated the asymmetric Fabry-Perot etalon which contains amorphous $As_2S_3$ as a spacer layer by using the method of optical multilayer coating and observed the optical bistability with the polarization. Optical thickness of the spacer layer is 2$\lambda$ at $Ar^+$ ($\lambda $=514.5 nm) laser wavelength. Optical bistability was observed at the intensities between 80~100 mW and the experiment shows us that the trends of bistable loop of the reflected and the transmitted lights are quite different depending on the state of polarization. This phenomena can be explained as the phase differences of each polarizations are different in the nonlinear Fabry-Perot etalon.

• Journal of Broadcast Engineering
• /
• v.22 no.2
• /
• pp.207-213
• /
• 2017

In order to accurately perform multispectral imaging using a multiplexed illumination, intensity of illumination in a scene must be uniform. For image acquisition that requires accurate color information, even if not multispectral imaging, the illumination information must be accurate, and a flat light source or illumination calibration is performed for accurate illumination characteristics. In this paper, we propose a method of color correction to uniformly illuminate an image with non-uniform illumination intensity. The proposed method uses multispectral imaging instead of illumination calibration for color correction. First of all, we perform multispectral imaging with two images obtained from non-uniformity illumination to acquire spectral reflectance. The obtained reflection spectrum is relit as the illumination characteristic of the image obtained from general planar light such as fluorescent light or sunlight. By comparing the image obtained by relighting with the uniformly illuminated image, the non-uniformity of the illumination is confirmed, and the color correction is performed as the image obtained from the uniform image. It is expected that the experimental results will confirm whether the non-uniformity of the illumination is uniformly corrected and reduce the restriction of illumination in obtaining the color information of the image.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.32-39
• /
• 1999

In this paper, we made CGH patterns that had continuous amplitude distribution binary coded patterns with two different methods, and analyzed those patterns by using LCSLM (liquid crystal spatial light modulator). The error diffusion algorithm and direct quantization method were used as the binarization methods. The parameters of overall average brightness, mean square error, and diffraction efficiency were used in the comparison of reconstruction characteristics. The LCSLM which we used in this experiment was a binary reflective ferroelectric liquid crystal spatial light modulator addressed electrically with 256$\times$256 pixels, 87% fill factor and 15$\mu$m pixel pitch.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.296-296
• /
• 2011

동시 증발법(co-evaporation)에 의해 성장된 $CuIn_xGa_{1-x}Se_2$ (CIGS) 박막의 광학적 특성을 photoreflectance (PR) 분광법으로 연구하였다. 조성비 x는 0~1까지 변화시켰다. 시료의 두께는 약 2.2 ${\mu}m$였다. PR 측정은 변조빔 세기, 변조빔 주파수 및 온도의 함수로 조사하였다. PR 스펙트럼으로부터 조성비 x가 증가함에따라 시료의 띠간격 에너지가 증가하는 것을 관측하였다. 상온 PR 스펙트럼으로부터 시료내에 형성된 내부 전기장을 구하였다. 그리고 변조빔 세기의 증가에 따른 PR 신호의 세기는 점차 증가하는 반면에, 변조 주파수를 증가시킴에 따라 신호의 세기가 점차 감소함을 보였다. PR 신호의 온도 의존성 실험으로부터 띠간격 에너지의 변화 및 Varshni 계수 등을 구하여 CIGS 시료의 특성을 조사하였다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.165-168
• /
• 1997

We have constructed a scanning confocal microscope using a 780 nm semiconductor laser, an actuator of a compact disk player and a quad-detector. This device detects heights and characteristics of a surface. The laser focus was located at the surface of a sample by using the error signal obtained by a quad-dector, and the current supplied to the actuator for lens was displayed as a height. The materials of a surface were classified according to reflected total intensities and was displayed by different color in a monitor. The device has very samll dimensions of 30 mm$\times$20 mm$\times$20 mm and scan field is 1.6 mm$\times$1.6mm. We obtained two images, one using only reflected light and the other using an error signal from a quad-detector and compared these two images.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.907-915
• /
• 2018

This paper proposes a method to improve the performance of low cost infrared distance sensor. Infrared distance sensor measures the intensity of reflected light and converts it into distance. The proposed method improves the sensing distance of the sensor and makes it operate robustly in various lighting environments. This is achieved by extracting the characteristic curves of the sensor and applying the HDR (High Dynamic Range) technique. The output value of the sensor was obtained by varying the intensity of the infrared input and the exposure time, and the characteristic curve of the sensor was extracted from it.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.40-50
• /
• 1999

Recently, a laser displacement sensor is widely used for the manufacturing automation. The sensor is generally composed of a diode laser and a light receiving device. The diode laser emits a laser beam and the receiving device detects the light reflected from the measured object. The object position is obtained based upon triangulation method. As a light receiving device, a PSD is usually utilized since its structure is very simple and rugged and has a high accuracy. Although the theoretical relationship for this sensor had been developed, the characteristics of the sensor have not been much experimentally studied. In this paper, several experimental results will presented. The measurement accuracy is affected by the surface conditions such as the reflectance characteristics, the angle of the object's surface and the laser intensity. In addition, it is found that the PSD and the signal processing circuit have nonlinearities and showed that those nonlinearities can be reduced by controlling the emitting laser intensity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.505-512
• /
• 2019

We propose a new method to monitor the water level of spent fuel pool in a nuclear power plant without electric power. We also analyze the performance and limitation of the proposed method. Our method is based on the reflected optical power at the end of optical fiber through a $1{\times}N$ optical coupler. We reveal that there is no problem to monitor the water level when using a $1{\times}8$ optical coupler. However, when a $1{\times}16$ optical coupler is used, only 15 out of 16 output ports can be used due to Rayleigh back-scattering. When a $1{\times}32$ optical coupler is used, only 25 out of 32 output ports can be used to monitor the water level.