• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.829-835
• /
• 2006

In this paper, new structure of the Cassegrain reflector antenna whose spill-over is efficiently reduced by modified reflectors is proposed for high power. It can be achieved by designing the geometry of subreflector in Cassegrain system using two hyperbolic curves in order to be suitable a lager beamwidth of feeding pattern without broadening main reflector. Finally, radiation efficiency and side lobe level of the proposed Cassegrain reflector antenna can be improved respectively 9 %, 10 dB than conventional one.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.334-344
• /
• 2009

In the present paper, analytic solutions are derived for scattering of obliquely incident waves by a semi-infinite breakwater or a breakwater gap of partial reflection. In order to examine the appropriateness of the derived solutions, they are compared with the solutions derived by McIver in 1999 and Bowen and McIver in 2002 for a semi-infinite breakwater and a breakwater gap, respectively, in the case of perfect reflection. The derived analytic solutions are used to investigate the effect of reflection coefficient of the breakwater and wave incident angle upon the tranquility at harbor entrance. The tranquility is deteriorated by the reflected waves as the reflection coefficient increases and as the waves are incident more obliquely.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.25-32
• /
• 1983

The corner reflector is used to increase the echoing area of radar targets in the air, and it can also be applied to increase the echoing area of the sonar targets under water. As the basic research for this application, the authors investigated the ultrasonic reflection characteristics under water for the corner reflector which was made of aluminum plate. The experiments were made by pulse measuring method with the magnetostrictive ferrite transducers of 28, 50 and 75KHz in the experimental water tank. The results obtained are as follows; 1. The target strength of corner reflectors were increased in proportion to the diameter and were greater at higher frequency of 75KHz than at lower frequency of 28KHz. 2. In the case of 5 corner reflectors of 150mm in diameter which have corner angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$the measured values of the maximum target strength at 75KHz were-25.0 dB, -17.2dB, -15.1dB, -13.4dB and 11.0dB, and then the number of main lobes showing the maximum target strength in the backscattering patterns were 24, 12, 8, 6 and 4, respectively. 3. When 7 corner reflector of 80mm in diameter and 90$^{\circ}$ in the corner angle was located on the minor axis of the horizontal section with directional angles of 0$^{\circ}$, 2.5$^{\circ}$, 5.0$^{\circ}$, 7.5$^{\circ}$, 10$^{\circ}$ and 12.5$^{\circ}$ against the sound beam axis, the measured values of the target strength on each position at 75KHz were -21.2dB, -21.9dB, -26.0dB, -30.5dB and -36.8dB, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.4
• /
• pp.193-200
• /
• 1985

In the reflection and transmission of a plane wave(TE) from a dielectric plane surface oscillating sinusoidally perpendicular to its surface, one could assume that the boundary moves with a uniform velocity equal to the instantaneous oscillating velocity. The reflected and the transmitted fields are obtained as the function of the incident angles, the dielecri'c permittivity, and the oscillating velocities according to the extended Lorentz transform.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.46-52
• /
• 2010

A theory of bidirectional reflectance-distribution function (BRDF), a newly developed BRDF measurement system, and a method for evaluating the uncertainty of BRDF measurements are presented. The BRDF measurement system which measures BRDF in a wavelength range of (380~1500) nm with an angle range of $(-75{\sim}75)^{\circ}$ was installed. The measurement uncertainties, consisting of correlated terms and uncorrelated terms, were evaluated for the BRDF measurement system, resulting in the relative expanded uncertainty less than 3% (k=2).

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2013.11a
• /
• pp.25-25
• /
• 2013

식생의 생물계절학적 특성은 지표면과 대기의 에너지와 물 순환에 큰 영향을 미친다. 일반적으로 상층군락과 하층군락의 식생은 미기후의 차이 등에 의해 서로 다른 생물계절학적 특성을 가진다. 이러한 식생의 생물계절학적 특성은 반사도 관측을 통해 추정할 수 있다. 과거부터 원격탐사 기법을 활용하여 식생의 생물계절학적 특성을 추정하는 많은 연구가 수행되어 왔다. 그러나 대부분의 연구는 상층군락과 하층군락의 반사특성을 구분하지 않았다. 본 연구에서는 상층군락과 하층군락 식생의 생물계절학적 특성을 구분하여 탐지하기 위해 red, green, blue 그리고 near-infrared 의 네 가지 파장대를 가진 LED 센서를 이용하였다. LED 센서는 광릉 시험림 내의 활엽수림과 침엽수림 관측지에 서로 다른 네 군데의 높이에 설치되어 각 파장대의 반사도를 산출하였다. 또한 반사도를 이용하여 세 가지 식생지수(NDVI, EVI, Greenness index)를 산출하여 상층식생과 하층식생의 개엽기를 추정하였다.

• Bulletin of the Korea Photovoltaic Society
• /
• v.5 no.1
• /
• pp.38-45
• /
• 2019

건물 일체형 태양광 발전시장의 증가에 따라 미적(Aesthetic) 요소가 결합된 태양광 모듈에 대한 수요가 증가하고 있다. 이런 시장의 요구에 따라 다양한 색상을 가지고 있는 컬러 태양광 모듈에 대한 연구 및 개발이 활발하게 진행되고 있다. 여러 제안된 컬러 태양광 모듈 기술 중 결정질 실리콘(crystalline-silicon) 기반 태양광 모듈에 컬러 유리 혹은 컬러 층을 도입하는 기술은 기존 실리콘 모듈의 장점인 신뢰도와 가격 측면에서 다른 방식 대비 큰 장점이 있다. 결정질 실리콘 모듈에 컬러를 구현하기 위해서는 현재 크게 세가지 방식이 제안되고 있다. 가장 먼저 제안된 방식은 태양전지 전면에 반사 방지막 형성 시 특정 파장만 반사할 수 있는 층이 도입된 컬러 태양전지(color photovoltaic cell)를 이용하여 색상을 구현하는 방식이다. 다른 한 방식은 일반 검정색 태양전지에 반사가 가능한 입자 혹은 박막층을 태양광 모듈 전면에 도입하는 반사형(Reflective) 컬러 태양광 모듈 기술이다. 마지막으로 특정 파장을 흡수하여 다른 파장으로 발광하는 염료 혹은 안료를 이용한 발광형(Luminescent)방식에 대한 연구도 진행 중이다. 본고에서는 각 방식의 동작 특성 및 기술 동향에 대해 논의하고자 한다.

• International Journal of Highway Engineering
• /
• v.1 no.1
• /
• pp.97-106
• /
• 1999

This study was conducted to develop a test system for evaluating resistance against reflection cracking in shear mode caused by wheel load in asphalt concrete overlaid on the deteriorated cement concrete pavement. Reflection cracking resistance of selected polymer modified asphalt(PMA) mixtures with and without reinforcement was evaluated using this test system. It was shown that the test results accounted for the effectiveness of materials and reinforcement characteristics in terms of the difference in the resistance against reflection cracking. A shear failure life of a certain mixture was estimated with a high coefficient of determination. when the test results were used in a well known prediction model. Therefore, it seemed to be possible to use this technique for predicting a relative service life of on overlay.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.263-267
• /
• 2009

In order to improve the hydrophilic property on the surface of d-PMMA(deuterated poly-(methyl methacrylate)) film, it was exposed to oxygen plasma, All experimental conditions were same except to plasma exposure time that was varied from 0 to 180 s, The effects according to the exposure time were identified using contact angles, X-ray reflectometer(XRR), neutron reflectometer(NR), and X-ray photoelectron spectroscopy(XPS). By confirming that as the exposure time increases, water contact angle decreases while the composition of oxygen increases, it was confirmed that the composition of oxygen has a huge influence on improving the hydrophilic property. The physical characters as a function of the exposure time were investigated by the XRR. By analyzing complementally the results of the XRR, NR, and XPS, more detailed chemical bonding conditions were studied by obtaining not only composition of the carbon and oxygen but that of the hydrogen.