• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.143-151
• /
• 1998

최근들어 반복하중에 의한 철근콘크리트 구조물의 손상이 자주 발견되고 있으며 교량 등의 구조물 등은 때때로 과적차량에 의한 초과하중을 받아 이러한 피로손상이 심화되고 있다. 본 연구에서는 이러한 반복 하중을 받는 철근 콘크리트보의 누적피로손상에 대한 실험적 연구룰 수행하여 피로하중에 의한 철근콘크리트보의 손상과정을 규명하였다. 실험 변수를 전단철근의 양과 반복되는 하중의 크기 및 반복횟수로 하여 실험부재를 제작하였으며, 하중제어에 의한 휨시험법에 의해 3Hz의 반복하중을 시편에 재하하였다. 사인장 균열하중과 사인장 균열 후 반복하중에서의 보의 손상누적거동 즉 처짐. 전단철근의 변형도, 에너지 손실 등의 변화를 실험적으로 평가하였으며, 이를 통하여 반복하중에 의한 누적손상에 의해 철근 콘크리트보의처짐 및 전단변형도가 초기하중상태에서는 급격히 증가하다가 이후 점진적으로 증가하는 것을 규명하였다. 본 연구의 결과는 사용하중상태에서 점진적으로 발생할 수 있는 피로손상의 누적과정을 기술하여 주고 있다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.53-64
• /
• 2012

In this study, the modified cyclic triaxial tests with Joomunjin standard sand are performed for dynamic deformation characteristics, such as Young's moduli and damping ratio. The cyclic triaxial test is equipped with Local Displacement Transducer (LDT) on the outside of a cell which has a range from $10^{-4}$ to $10^{-1}$ of shear strains, ${\gamma}$ (%), instead of conventional cyclic triaxial test which has linear variable displacement transducer (LVDT) with low precision. With the small strain control, tests were carried out at various loading rates, void ratios, and effective confining pressures. Based on the test results, such as dynamic deformation characteristics, shear modulus, and damping ratio, it is found that the test can measure more range of medium strains (0.02-0.2%) than results obtained from conventional test (resonant column test). For the medium strain range, dynamic deformation characteristics investigated by the cyclic triaxial test are also different from those predicted by nonlinear model in conventional test.

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.113-126
• /
• 1995

Both resonant column (RC) and torsional shear(TS) tests were performed at small to intermediate strain levels to investigate deformational characteristics of cohesive soils. The effects of variables such as strain amplitude, loading frequency, and number of loading cycles were studied. Plasticity index was found to be an important variables in evaluating these effects. Soils tested include undisturbed silts and clays and compacted subgrade soils. At small strains below the elastic threshold, shear modulus is independent of number of loading cycles and strain amplitude. Small strain material damping exists wi th ranges be tween 1.1% and 1.7% for 75 tests. The elastic threshold strain increases as confining pressure and plasticity index increases. Above the cyclic threshold strain, the modulus of cohesive soil decreases with increasing number of cycles while damping ratio is almost independent of number of load cycles. Moduli and damping ratios of cohesive soils obtanined by RC test are higher than those from 75 test because of the frequency effect. Shear modulus of cohesive soil increases linearly as a function of the logarithm of loading frequency.

• Geotechnical Engineering
• /
• v.7 no.3
• /
• pp.33-42
• /
• 1991

Increasing demand of rational analysis of dynamic soil behavior subjected to repetitive loading has evolved soil dynamics which is essential for proper design and/or analysis of dynamically loaded soil structure. In this paper, the stress-strain behavior of weathered granite soil under cyclic loading is stud- ied by measuring the strength and the strain before and after application of at least 11, 000 cycles of repetitive load. Relationships are suggested for predicting results of soil dynamics from those of soil statics.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.235-240
• /
• 1996

본 연구에서는 고온의 천이 열하중을 받는 304 SS 재질의 액체금속로 원통용기에 대하여 진행성 변형기구인 열적 라체팅(thermal ratcheting) 변형거동을 해석하였다. 재료의 반복 소성을 나타내는 구성식으로서 Chaboche모델을 이용하였으며 이 모델의 적용을 위하여 ABAQUS의 사용자 프로그램을 개발하였다. 열천이 과정이 반복되는 동안에 축방향의 온도분포 이동에 따른 탄소성 해석을 수행한 결과 소성변형이 각 싸이클마다 누적되어 점진적 변형이 일어났으며 이 해석결과를 시험치와 비교함으로써 해석의 타당성을 검토하였다. 반복 소성거동에 대한 Chaboche 모델을 이용하면 천이 열하중을 받는 304 SS. 재질의 고온구조물에 대하여 라체팅 거동을 정량적으로 평가 할 수 있는 것으로 나타났다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.8
• /
• pp.379-389
• /
• 2001

본 논문에서는 루프 반복들 간에 종속 관계가 존재하는 루프의 효율적 수행을 위한 새로운 루프 할당 기법을 제안한다. 그리고, 중앙 큐를 사용하여 공유 메모리 다중처리기에 루프 반복을 할당하는 기존 셀프 스케쥴링 기법들을 루프 캐리 종속성(loop-carried dependence)을 가진 루프의 할당에 적용하기 위해 제안한 기법을 이용한 그들의 변형에 대해 알아본다. 종속 거리를 고려하여 루프를 세 단계별로 할당하는 제안된 CDSS(Carried-Dependence Self-Scheduling) 기법 또한, 중앙 작업 큐를 기반으로 한 것이며 별도의 스케쥴러가 필요 없는 셀프 스케쥴링 알고리즘이다. 종속거리, 프로세서 수, 반복 수, 스케쥴링 연산 시간 등을 다양하게 하여 변형된 할당 기법들과 비교 분석한 결과, 제안한 기법은 양호한 부하 균형을 유지하였으며 변형된 다른 기법들에 비해 루프 수행 시간을 줄여 효율적임을 알 수 있었다. 다양한 실험 환경에서 평균적으로 제안한 CDSS, 변형된 SS, Factoring, GSS, CSS 기법 순으로 루프 수행 시간 측면에서 좋은 성능을 보였다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.31-36
• /
• 2008

Architectural membrane are now used in the roof of large span structures throughout the world with the merits of free shape and lightness. Some membrane have some problems of structural capacity by the wind or snow load conditions, large span structures was shown to the tearing of the membrane. This paper is the experimental test on the stress strain curve of cycling load for the glass fiber membrane. In the result of stress strain relationship curve by the cycling load, glass fiber membrane was reduced the tensile strength, the polyester membrane was shown to occur the increase of displacement without load reduction in each load step.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.465-471
• /
• 2006

To describe hysteretic behavior of steel structures under dynamic loading such as earthquake, the dynamic cyclic plasticity model considering stress-strain relationship and characteristics of used steel materials under static-dynamic deforming is required. In this paper, mechanical characteristics and stress-strain relationship of SM490 was clarified by carrying out static-dynamic monotonic and cyclic loading test. A dynamic cyclic plasticity model of SM490 was proposed based on the test results and applied 3-dimensional finite element analysis using finite deformation theory. An analytical method developed by the authors was verified validity and accuracy by comparing both analysis and test results. The comparison result shows that the analytical method developed by the authors can predict static-dynamic hysteretic behavior of steel structures with accuracy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.4
• /
• pp.23-32
• /
• 1999

Behavior of H-beam connections under cyclic loadings is investigated experimentally in this study. The purpose of this study is to study the effect of steel properties and coping shape on the hysteretic behavior of H-beam connections. Five beam-to-column connection specimens were fabricated and tested under cyclic loadings. The load-rotation curves of the beam connections were mainly obtained. Deformation capacity and energy dissipation capacity of the connections are compared each other. The connections fabricated from SS400 showed good deformability and energy dissipation capacity, but those from SM490 showed brittle fracture at the connection. The coping shape at the connections showed a little difference in cyclic behavior.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.339-353
• /
• 1998

In this paper, the previous damage models for structures and their components under seismic repeated loading were reviewed systematically. A failure criterion for steel members under severe cyclic excitations as in strong earthquakes was described. A new approach to seismic damage assessment for steel members was proposed. This method was based on a series of the experimental and numerical investigations for steel members under very low cyclic loading. In this study, very low cyclic loading means repetitive loading, 5 to 20 loading cycles, within the large plastic range. The proposed damage assessment method was focused on the local strain history at the cross-section of the most severe concentration of deformation.