• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.162.2-162.2
• /
• 2015

플렉서블 디스플레이에 사용되는 투명전극은 벤딩에 의한 인장(tensile) 및 압축(compressive) 스트레스 하에서도 전극의 특성이 지속적으로 유지되어야 한다. 기존 OLED소자의 투명전극으로 사용되던 인듐산화물(ITO, Indium Tin Oxide)는 인듐(Indium)의 희소성 문제뿐만 아니라 벤딩에 대한 복원력이 나쁜 것으로 알려져 플렉서블 디스플레이에는 적합하지 않은 것으로 알려져 있다. 벤딩에 강하고 복원력이 우수한 투명전극 재료가 필요하게 되었다. 본 연구에서는 PEN (Polyethylene Naphthalate) 유연기판 상에 그래핀(Graphene)전극을 구현하여 벤딩에 대한 저항특성을 관찰하였고 일반적으로 많이 사용하는 Aluminum 전극과의 비교를 통해 광효율을 지속적으로 유지할 수 있는 플렉서블 OLED용 전극구현 가능성을 연구하였다. 일반적으로 Al금속은 인장 스트레스를 받음에 따라 저항이 증가하고 다시 복원되면 저항이 감소하는 특성을 갖고 있는데 인장 스트레스에 따라 저항과 늘어난 길이와의 관계는 다음과 같다. $R/R0=(L/L0)^2$ ----------------------------------------- (1) 그러나 반복된 스트레스가 가해질 경우 Al 금속 전극은 복원력을 잃고 저항이 원래대로 돌아가지 않는 문제가 발생하는데 반해 그래핀은 벌집모양의 구조를 갖고 있어 벤딩에 대한 강도가 셀 뿐만 아니라 고탄력으로 인해 복원력이 우수하여 여러 싸이클(cycle)의 벤딩 실험에 의해서도 복원력이 지속적으로 유지되었다. Al 금속 전극의 경우 벤딩 각도 또는 정도에 따라 복원력이 유지되는 구간이 있으나 반복적인 벤딩 싸이클에 의해 복원력이 감소하여 인장 스트레스에 의한 저항 증가 후 스트레스 제거 시 저항 감소가 되지 않는데 24시간 동안 전기 저항 변화를 관찰하면 수시간 후에나 저항이 어느 수준까지만 복원되는 것을 확인할 수 있었으나 복원에 오랜 시간이 소요된다는 점에서 그래핀과 비교가 된다. SEM(Scanning electron microscopy) 분석을 통해 인장 스트레스 인가/제거를 반복함에 따라 Al 금속표면이 표면에 열화되는 것을 확인하였으나 그래핀에서는 나타나지 않았다. 본 연구에서는 높은 투과도와 우수한 전기적 특성을 가지는 그래핀 투명 전도성 전극이 다양한벤딩 조건에서도 뛰어난 복원 특성을 보이는 것을 밝혀내어 차세대 투명 전극 물질로 개발하고자 하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.155-160
• /
• 2018

In this paper, we found that buffer cache in general systems does not perform well in rendering software, and presented a new buffer cache management scheme that resolves this problem. To do so, we collected various file I/O traces of rending software and analyzed their characteristics. From this analysis, we observed that file I/Os in rendering consist of long loops, short loops, random accesses, and write-once accesses. Based on this observation, we presented a buffer cache management scheme that allocates cache space to each access types and manages them appropriately, thereby improving the buffer cache performances by 19% on average and up to 55%.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.04a
• /
• pp.30-34
• /
• 1999

과채류 수확작업은 어렵고 힘든 지루한 작업이 반복적으로 수행된다. 지상 1m내외에서 결과하는 과채류의 경우 수확 중 많은 노동력을 필요로 한다. 특히 오이의 수확은 연속된 단순 반복 작업으로 작업인의 피로도가 매우 높다. 또한 농산물 수입개방으로 값싼 외국산 농산물이 대량 유입되고 있는 실정으로 농산물의 생산비 절감을 통한 대외 경쟁력을 갖추기 위해서는 과채류 수확에 있어서 로봇을 이용한 수확기 개발이 필요한 실정이다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.122-128
• /
• 1996

In high speed and high precision assembly systems such as a surface mounting device and robotend effector, the contact force control is required. As the operation repeats, the repetitive control is applied to reduce the periodic contact force errors. Since high order unmodelled dynamics are easily excited in contact force control, a Q filter was introduced and its robust stability was analyzed. Simulation and Experimental results show the effectiveness of the algorithm.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.242-248
• /
• 2005

To study the fatigue properties of three type of foams for footwear midsole, polyurethane(PU), phylon(PH) and injection phylon(IP) foams were prepared with different hardnesses. Three types of foams were repetitively compressed for 50,000 cycles at 50 rpm. Cell shapes of foams were deformed with repetitive compression. The extent of cell deformation of IP was larger than those of PH and PU. Permanent strain of foam was made by repetitively compressing the foam, and the extent of IP was larger than those of PU and PH. Maximum compression forces of three types of the foams were decreased with the repetitive compression, and IP had the largest decrease in compression load of foam with compression. Decreases in maximum compression force of three types of foams were increased with increase of the hardness of foam.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.317-326
• /
• 2011

Today there is a growing range of applications for Concrete-Filled Steel Tube (CFT) member because of its superior performance. Ductility estimation test of concrete-filled seismic resistant steel tubular columns, subjected to axial and cyclic lateral load, was carried out in this study. Seismic resistant steel tubes are manufactured using SN400B plates by a two-seam welding at center of the column width for cold press-formed shape plates of two pieces. A total of eight specimens were manufactured and tested with the parameters of width-thickness ratio of steel tubular column, axial load ratio, and loading conditions to act axial and cyclic lateral load two dynamic actuators were used. From test results, flexural strength, deformation capacity, energy dissipation capacity, and ductility behavior of columns were analyzed.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.244-250
• /
• 2001

One of the reasons for brittle failure in reinforced concrete structures subjected to severe earthquake is due to large slip between reinforcing steel and concrete. This study aims to evaluate effects of deformation patterns of ribbed reinforcing bars on bond under cyclic loading. Bond test specimens were constructed with machined bars to test the newly developed reinforcing bars with high relative rib areas. The degree of confinement is also another key parameter in this bond test. From the test results under monotonic and cyclic loading, bond strength and stiffness were evaluated. Bond strength and bond stiffness increase as relative rib areas under cyclic loading for specimens highly confined by transverse reinforcement. The increase rates of the bond performance under cyclic loading are larger than those of specimens under monotonic loading. The developed bars with high relative rib areas will contribute for better bond performance for reinforced concrete structures subjected to severe seismic loadings.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.40-47
• /
• 2006

The learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work the authors presented an iterative precision of linear decentralized learning control based on p-integrated teaming method for the vertical dynamic multiple systems. This paper develops an indirect decentralized learning control based on adaptive control method. The original motivation of the loaming control field was learning in robots doing repetitive tasks such as on a]1 assembly line. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. Error wave propagation method will show up in the numerical simulation for five-bar linkage as a vertical dynamic robot. The methods of learning system are shown up for the iterative precision of each link at each time step in repetition domain. Those can be helped to apply to the vertical multiple dynamic systems for precision quality assurance in the industrial robots and medical equipments.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.71-75
• /
• 2012

The present study data were obtained from 36,894 cows in Korea Animal Improvement Association from 2001 to 2009 which was subjected for ultrasound measurements (eye muscle area, back-fat thickness, marbling score) and descent. Repeated record models were carried out using 7,913 of 36,894 of total animal traits. The ultrasound measured traits and performance test data were used to study the chest girth, body condition score, eye muscle area, back-fat thickness and marbling score with genetic correlation and parameters for the ultrasound measured traits using REMLF90 program. Genetic correlation of eye muscle area with back-fat thickness, marbling score and back-fat thickness with marbling score were noticed in repeated records animal model as 0.69, 0.54, and 0.59, whereas in multiple trait animal model method were 0.07, 0.66, and 0.39, respectively. Repeated records of animal models were used as positive correlation of traits. Multiple trait animal models were used as negative correlation of eye muscle area with marbling score. The analysis on repeat records of animal models using ultrasound measurements about Korean cattle showed positive effects for each traits. In comparison differences between the repeat records of animal models and multiple trait animal models was found with higher traits of her, the heritability and repeatability was found higher in repeat records animal models. In light of these assessments, carcass traits by ultrasound measurements are expected to help and improve an accurate analysis of each trait and if the research analysis using repeat records of animal models continue when we estimate genetic ability of these traits.

• Communications for Statistical Applications and Methods
• /
• v.4 no.3
• /
• pp.765-774
• /
• 1997

본 논문에서는 반복이 없는 이원배치에서 교호작용의 존재를 가정하고 처리수준간의 모집단 분포의 동일성을 검정하는 비모수적 검정법을 제안하였다. 검정통계량의 구성을 위하여 순위벡터를 그 구조의 형태별로 정리한 순위위치벡터를 제안하고, 이의 특성과 응용가능성을 연구하였다. 또한 모의 검정력 연구를 통하여 기존의 비모수적 방법이 갖는 약점과 제안한 통계량의 우수함을 실증하였다.