• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.185-192
• /
• 2017

This study examined the optimum conditions and obtained the basic data for processing semi-dried sea cucumber flakes. During the boiling process, the weight and length of the sea cucumber decreased to 45.61% and 55.87%, respectively. Thereafter, there was a gradual decrease in the weight and length of the sea cucumber, which were finally maintained at 30.00% and 50.93%, respectively. The moisture content during drying was 38.37% after 3 hours at $60^{\circ}C$, and 36.56% after 5 hours at $30^{\circ}C$. However, the decrease in moisture content was slowly at 60 hours and $4^{\circ}C$, reaching a final value of 68.9%. The length of boiled sea cucumber during drying decreased to 66.35% after 11 hours at $60^{\circ}C$, and 68.90% after 24 hours at $30^{\circ}C$. The chromaticity and hardness tended to increase during the drying process. Moisture content and water activity of sea cucumber flakes decreased from 81.48% (0.963) to 33.50% (0.763), respectively, after 3 hours at $60^{\circ}C$. Following this, the moisture content and water activity continuously decreased to 30.75% (0.608) at 4 hours and 19.47% (0.437) at 5 hours, respectively. The overall acceptance score was 4.11 and 3.89 for 4 hours dry sample and 5 hours dry sample, respectively. However, the score was not statistically significant.

• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.288-293
• /
• 2007

Intermediate moisture-apple snail products were prepared by adding glycerol, sorbitol, kiwi, or pineapple(2% or 5% w/w), as tenderizers, and by drying at $4^{\circ}C$ for 24 hr. The effects of the tenderizers on textural and sensory properties of the apple snail products at intermediate moisture levels were investigated. Moisture content and water activity of the products were ranged from 26.25 to 34.48% and from 0.83 to 0.87, respectively. The addition of glycerol significantly lowered water activity of apple snail samples compared to control prepared without tenderizers. On the other hand, significant increases in moisture content and water activity were observed in apple snail samples treated with kiwi or pineapple(p<0.05). All apple snail samples treated with tenderizers showed a lower shear force than did the control. Apple snail samples treated with 5%(v/v) glycerol showed a higher equilibrium moisture content than did the other samples. SDS-PAGE indicated that proteolytic enzymes in kiwi and pineapple clearly changed the structure of the myosin heavy chain and actin filaments of myofibrillar protein in apple snail samples. Intermediate moisture apple snail samples treated with tenderizers showed significantly improved overall sensory characteristics. The highest overall acceptability was obtained from apple snail samples treated with 5% pineapple, while the lowest overall acceptability was noted in the control sample. This study demonstrates that an acceptable apple snail, with intermediate moisture content, may be produced by using tenderizers at appropriate concentrations.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.937-942
• /
• 2003

Kimchi was prepared with 5, 10 or 20%(w/v) Chinese radish and ripened at $20^{\circ}C$ for 3 days. Acid production and growth of lactic acid bacteria, sensory properties, and several volatile odor components in kimchi were examined. The effects of freeze-drying on the quality of kimchi were also studied. The pH of the control (kimchi prepared without Chinese radish) was 4.31 and gradually decreased as the amount of Chinese radish increased. The acidity of the control was 0.673% and gradually increased as the amount of Chinese radish increased. Viable counts of lactic acid bacteria in the samples did not differ significantly from the control. The pH of freeze-dried/rehydrated kimchi slightly decreased as the amount of Chinese radish increased while its acidity gradually increased. The viable count of lactic acid bacteria of freeze-dried/rehydrated kimchi did not differ significantly as the amount of Chinese radish increased. Overall acceptability and taste of kimchi and freeze-dried/rehydrated kimchi generally improved by the addition of 10% or 20% Chinese radish. Six volatile odor components including ethanol and five sulfur-containing components (SCC) were identified from unripened kimchi, and the level of two SCCs increased as the amount of Chinese radish increased. Eight volatile odor components, ethanol and seven SCCs, were identified from ripened kimchi and the level of five SCCs increased as the amount of Chinese radish increased. Diallyl sulfide and methyl trisulfide were newly detected from the ripened samples, but not from the unripened kimchi. Freeze-drying substantially reduced all of the volatile odor components from kimchi. Five volatile odor components including ethanol and four SCCs were identified from the freeze-dried/dehydrated samples.

• Culinary science and hospitality research
• /
• v.18 no.2
• /
• pp.182-196
• /
• 2012

This study investigates the optimal application of perilla leaves to fresh noodles in terms of a variety of beneficial effects and functions such as the anti-microbial function of the leaves. First, we measured the water contents of the fresh noodles and found that the ones added with 7% lyophilized perilla leaf extract showed the maximum water contents whereas the control noodles without perilla leaf extract the minimum. Increasing amount of raw perilla leaf extract or lysophilzed perilla leaves in the fresh noodles elevated the L value and significantly reduced the A value. The mass and volume of the fresh noodles were gradually decreased with raw perilla leaves added. Addition of raw perilla leaf extract and lyophilized perilla leaves decreased the turbidity of the fresh noodles. Hardness of the fresh noodles was increased by the addition of lyophilized Perilla leaves. Next, we tested the effect of the addition of sesame leaves on microbial growth. No microbes were found in the fresh noodles in the absence or presence of sesame leaves at day 0. When the noodles were stored for 3 days, the greatest number of bacteria was detected in the noodles without perilla leaves while addition of perilla leaves lowered the amount of bacteria in the noodles. We then performed the sensory test. For the raw perilla leaf extract addition, the noodles with 9% of extract exhibited the highest in appearance, flavor, color (6.47), texture (6.60), and overall acceptability (7.67). Texture was the highest in the ones with 3% (6.87) and 5% (6.20) of extracts added. Overall acceptability (7.07) was the best when 3% perilla leaves were added. Overall, 9% addition of raw perilla leaf extract or 3% addition of lysophilized perilla leaves showed optimal tastes.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.478-484
• /
• 1991

As a work on the preparation of spread type product using chungkook-jang, proximate composition and enzyme activity of chungkook-jang were analyzed and extrusion capillary viscometer was made. The effects of moisture content, oil type and content and temperature on the rheological properties of chungkook-jang spread were investigated. As the moisture content of chungkook-jang spread increased from 55% to 65%, apparent viscosity $({\eta}a)$ decreased and spreadibility and L value in Hunter color system increased. On the contrary, as the added oil content of chungkook-jang spread increased from 10% to 30%, rla increased and spreadibility and L value decreased. Specially, in case of palm olefin addition, the rla of chungkook-jang spread was more high than that of soybean oil addition. As the temperature of chungkook-jang spread increased, rla decreased and spreadibility increased. In the same conditions, the ${\eta}a$ of chungkook-jang spread increased in order of B. natto, B. natto and B. subtilis mixture and B. subtilis fermentation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.47-54
• /
• 2013

Aloe gel microcapsule was prepared by dehydrating dispersed aloe gel droplets in the form of W/O emulsion using a vacuum evaporator. The microcapsules remained in stable suspensions after washing with mineral oil and had a homogeneous spherical structure with diameter less than 6.4 ${\mu}m$. The microcapsule suspension in mineral oil (> 41%) exhibited a step increase in viscosity and shear-thinning but not showed thixotropic behavior with a yield stress higher than 300 Pa. The dense suspension appeared to be semi-solid as the microcapsule fraction increases and to be stable after heat treatment at $105^{\circ}C$ for 15 min. In conclusion, the dense suspension composed of gel microcapsules is expected to provide a basic cosmetic formulation that can be applied to develop various types of aloe gel cosmetic products.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.513-524
• /
• 2005

This study was conducted to introduce recycling procedures of food waste(FW) as feed according to the dehydration, semi-dehydration fermentation and liquid fermentation methods through the on-site survey of companies related, to trace physico-chemical components and nutritional losses depending upon the processing stage for each method and finally to suggest more desirable methodology for the efficient utilization of FW as animal feed. For the dehydration method, dewatering of FW alone reduced(P<0.05) moisture(approximately 10%) and ether extract contents and increased(P<0.05) fiber contents. Dewatering and subsequent dehydration of FW decreased(P<0.05) contents of ether extract, limiting amino acids such as lysine, methionine and histidine, pepsin digestibility of protein by half, and NaCl content by 40%, increased(P<0.05) contents of fiber, crude ash, Ca and P, and did not alter(P>0.05) pH. The semi-dehydration fermentation method of FW did not affect(P>0.05) the chemical components, pepsin digestibility of protein, pH and NaCl content. For the liquid fermentation method, pasteurization and fermentation of FW decreased(P<0.05) contents of dry matter, ether extract, crude fiber, lysine and NaCl; however, it did not affect(P>0.05) other chemical components, pepsin digestibility of protein and pH. Among the processing methods, nutrient losses were highest for the dehydration method(25% of metabolizable energy loss, 12% of organic matter loss) and little for the semi-dehydration and liquid fermentation methods. The on-site survey of companies related revealed that the existence of foreign materials in FW products were problematic for all the three companies surveyed, thus it was necessary to develop a more efficient screener. Before feeding FW-containing diets to pigs, high quality of protein and energy feedstuffs needed to be fortified for the dehydration method. For the semi-dehydration fermentation method, the scientific diet formulation technology was required at the initial mixing stage. For the liquid fermentation method, possibly most energetic and proteinaceous feeds needed to be supplemented for the normal animal growth.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.98-104
• /
• 2023

The feasibility of an efficient process proposed for Cu-Cu flip-chip bonding was evaluated by forming a porous Cu layer on Cu pillar and conducting thermo-compression sinter-bonding after the infiltration of a reducing agent. The porous Cu layers on Cu pillars were manufactured through a three-step process of Zn plating-heat treatment-Zn selective etching. The average thickness of the formed porous Cu layer was approximately 2.3 ㎛. The flip-chip bonding was accomplished after infiltrating reducing solvent into porous Cu layer and pre-heating, and the layers were finally conducted into sintered joints through thermo-compression. With reduction behavior of Cu oxides and suppression of additional oxidation by the solvent, the porous Cu layer densified to thickness of approximately 1.1 ㎛ during the thermo-compression, and the Cu-Cu flip-chip bonding was eventually completed. As a result, a shear strength of approximately 11.2 MPa could be achieved after the bonding for 5 min under a pressure of 10 MPa at 300 ℃ in air. Because that was a result of partial bonding by only about 50% of the pillars, it was anticipated that a shear strength of 20 MPa or more could easily be obtained if all the pillars were induced to bond through process optimization.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.309-314
• /
• 2002

Safflower Yangengs were prepared with composite dried powder of small red bean(Phaseolus radiatus L.) containing various ratios of safflower(Carthamus tinctorius L.) seed powder sifted through 20, 35, 45 and 60 mesh size and kinds of mixed water, their cooking characteristics were evaluated. Water content and water activity of cooked products were increased as the content and sieve mesh number of safflower seed powder increasing from 5%, 20 mesh to 20%, 60mesh, respectively. Color values of yangeng were increased in green tea extract mixed water. Rheological properties of yangengs were measured by compression test with texture analyzer, as results, hardness and fracturability increased that were shown in high content and high mesh number sifted safflower seed powder, but adhesiveness and springiness decreased, respectively. From the sensory evaluation test for yangeng, sensory scores were good scores in more mesh number sifted powder addition, especially overall acceptance, texture and fracturability. The 45mesh and 15% powder added yangeng was noted as having high sensory scores and preferable acceptability in sensory evaluation.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.115-123
• /
• 2015

This study aims to increase the transparency of the natural adhesives made with lacquer and glue. For the purpose, samples were prepared by mixing urushiol with glue in varied proportion and the characteristics and adhesive properties were investigated. By adding glue on urushiol, IR spectra of the natural adhesives became similar to that of glue as the N-H band related with protein of glue increased, while that of methylene C-H bond related to urushiol decreased. Samples were dried within a day and maintained a bright color without blackening by oxidation during the curing process. The natural adhesives with urushiol and glue showed various range of viscosity and tensile shear strength as Cemedine C or Epoxy resin according to mixing ratio. In addition, the sample of mixing ratio of 6:4 showed bright and transparency in appearance and tensile shear strength similar to that of Araldite AY103-1/HY956 for earthenware layer.