• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.271-278
• /
• 2010

Semi rigid pavement is a pavement type using advantages of both flexibility of asphalt pavement and rigidity of concrete pavement by infiltrating cement paste into voids of open graded asphalt mixtures. The semi rigid pavement has better smoothness and smaller driving vibration or noise comparing to the concrete pavement, and has smaller permanent deformation and has temperature falling effect comparing to the asphalt pavement. The temperature falling effect were investigated at a semi rigid overlay pavement test section, and the temperature falling and water retaining effects were verified by measuring the temperature and weight of specimens at a housetop. Horizontal and vertical stresses and strains were compared by structural analysis of the semi rigid pavement and asphalt pavement using the Abaquser o, a commercial 3D finite element analysis program. The results were verified by Bisar 3.0, a multi-layered elastic analysis program. Performance of the semi rigid pavement and asphalt pavement were compared by predicting fatigue cracking based on the structural analysis results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.119-127
• /
• 2014

The application of sulfur polymer emulsion (SPE) as an acrylate substitute for semi-rigid pavement grout was evaluated, and the performance improvement by employing PVA fibers were also evaluated. The result indicated that the filling ratio of semi-rigid pavement material decreased as the fiber content increased, but it was measured to be 92~94% in every mixing condition, which satisfies the target performance, 90%. The maximum Marshall stability value of semi-rigid pavement material was measured to be 25.4 kN, which is about 4.7 times higher than the Korean Standard required for semi-rigid pavement material, 5.0 kN. The dynamic stability evaluation of semi-rigid pavement material indicated that the resistance to deformation from the wheel tracking test was improved by an SPE substitution, and in every mixing condition, the deformation converged to a constant value after 45 minutes with the same dynamic stability of 31,500 times/mm. The strain at the flexural failure was about 0.53%, which shows superior rigidity to asphalt pavements. The examination of abrasion resistance and impact resistance showed that the loss ratio was 9.8~6.0% in every mixing condition, which indicates a good abrasion resistance. Also, when fiber content ratio was 0.3%, the impact resistance was 2.82 times higher compared to plain (i.e., when fibers were not added). In the limited range of this study, an SPE substitution ratio of 30% was found to be an optimal level considering the mechanical and durability performance. In addition, it is thought that semi-rigid pavement material with superior performance could be manufactured if fiber content ratio up to 0.3% is applied depending on the purpose of use.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.69-79
• /
• 2008

This study presents the test results on the performance and the moisture retaining ability of semi rigid pavement using the moisture retaining grouting. The two kinds of the grouting materials were used for the Laboratory tests. The method of the tests includes the compression(3 hours and 7 days) and flexural strength(7 days) varying the P lot flow values. The test results show that the variation of the P lot value has no great effects on the strength, however, the different strength was found as the different grouting materials were used. The performance of the semi rigid pavement was evaluated varying the air void ration of the base asphalt pavement. The test results show that the flexural strength of the semi rigid pavement increases with increasing the air void of the base asphalt pavement so that the flexural strength of the semi rigid asphalt pavement can be effected by the air void of the base asphalt pavement. The moisture retaining tests were conducted and compared in the field the comparisons were made with the dense grade asphalt pavement and the semi rigid asphalt pavement with and without spraying the water. The difference of the temperature of the semi rigid pavement with the spraying water has recorded $11^{\circ}C$ when it compared with the dense grade asphalt pavement and $4^{\circ}C$, when it compared with the semi rigid pavement without the spraying the water. It can be seen that decrease the temperature of the pavement by the moisture retaining ability from the semi rigid pavement.

• 도로교통
• /
• s.90
• /
• pp.39-45
• /
• 2002

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.68-75
• /
• 2016

The present study evaluated the mechanical properties of open graded asphalt for semi-rigid pavements in order to determine the mixing proportion experimentally. A total twelve types of basic mixing proportions were set up and mechanical tests such as marshall stability, porosity, permeability, and cantabro loss were conducted based on Korean standards. From the tests results, it was found that the marshall stability in case of straight and modified asphalt increase up to the contents with 5.0% and 5.5% respectively. The porosity and permeability of asphalt tended to decrease as the asphalt contents increase, the coefficient of correlation between both were estimated 86%. The increase contents with asphalt range from 3.5% to 6.0% tended to decrease the cantabro loss and the modified asphalt enhanced the resistance of cantabro loss with range from 18.8% to 33.1% than straight asphalt under same asphalt contents. In comparison with test results and quality standards, it was concluded that the modified asphalt content of 4.5% is effective to adopt for open graded asphalt.

• 한국도로학회:학술대회논문집
• /
• 2001.10a
• /
• pp.195-199
• /
• 2001

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.181-181
• /
• 2011

도로는 국내 물류를 담당하는 중요한 기반시설로 국내 경제성장의 중추적인 역할을 담당하고 있다. 특히, 1970년대 개통된 경부고속도로는 우리나라의 대동맥으로 산업 성장의 파급효과를 가져오는 기반이 되었고, 공학적인 차원에서도 도로 포장재료를 경험 및 과학적으로 분석하여 적용하는 계기로 도로공학발전의 초석이 되었다. 과거에 적용된 도로 포장재료는 기술자의 경험에 의존하여 배합설계가 진행되었으며, 중차량의 비중이 많은 지역은 강성포장을 적용하고, 상대적으로 중차량이 적은 구간은 연성포장을 적용하는 설계를 따랐다. 하지만, 강성포장을 대표하는 시멘트 콘크리트 포장은 시공상의 복잡함과 시멘트 콘크리트 특성상 강도발현을 위해서 일정기간 이상의 양생일수가 필요하므로, 도로건설의 인프라 구축이 시급한 지역에서는 사용의 제약이 따른다. 연성포장을 대표적하는 재료로는 아스팔트 콘크리트 포장을 들 수 있다. 강성포장보다는 상대적으로 시공상의 편리함과 일정기간의 양생이 필요하지 않아 도로 포장재료로서 그 적용성이 우수하다. 과거에는 아스팔트 콘크리트 포장의 종류가 단순화되어 표층, 기층에 대표되는 몇몇 혼합물이 도로 포장재료로 사용되었다. 도로공학의 학문적 발달과 함께 도로포장의 전반적인 기술이 향상되고 있다. 과거의 도로 기능은 국가 경제발전을 위한 산업용 원자재의 운반이 주요 기능을 담당하고 있는 반면, 국민의 경제적 수준이 증대되고 자가용의 보급이 보편화되면서 도로 이용의 주체가 국민 개개인으로 변화되고 있고, 그 요구조건도 다양화되고 있다. 이에 발맞추어 도로공학의 기술적 향상으로 다양한 기능을 발휘할 수 있는 도로포장재료가 개발되고 있으며, 대표적인 제품으로는 배수성 포장, 반강성 포장, 보수성 포장, 탄성 포장, 저소음 포장 등이 있다. 본 연구에서는 기능성 포장의 하나인 저소음 포장의 특성 중 생산성능을 평가하였다. 생산성능이란 저소음포장을 현장 플랜트에서 생산하였을 경우의 특성을 분석하는 과정으로, 실내 실험으로 최적화된 재료의 배합은 이상적인 조건을 적용하여 결정된 것으로 입고된 현장 골재 및 생산 플랜트 조건에 따른 그 배합 및 물성이 변동을 가져올 수 있다. 특히, 저소음 포장은 기존의 아스팔트 포장과 달리 적용되는 골재, 아스팔트의 재료가 고성능을 발휘하기 위하여 특수한 재료를 적용해야 한다. 배합설계에서도 개립도 아스팔트 혼합물에 적용되는 내구성분석 절차를 따라야 하므로, 실내 배합설계 혼합물과 현장 생산 혼합물간의 물리적 특성에 차이를 나타낼 수 있다. 따라서, 본 연구에서는 실내 및 현장 혼합물의 전반적인 물리적 특성의 차이를 분석하여 저소음 포장의 현장 생산성능을 확인하였다. 분석요소로는 혼합물의 기초물성면에서는 밀도, 공극률을 분석하였으며, 실내 내구성면에서는 마샬안정도, 잔류안정도를 분석하여 실내 및 현장 혼합물의 물성차이를 분석하였다. 기초물성을 평가할 수 있는 밀도와 공극률에서는 생산 현장 혼합물이 실내 혼합물 보다 높은 밀도와 낮은 공극률을 나타내고 있으며, 이에 상관하여 강도특성을 분석할 수 있는 마샬안정도도 생산 현장 혼합물이 다소 높은 강도를 발휘하였다. 또한, 수분에 대한 안정성을 평가하는 인자인 잔류 안정도에서는 실내 및 현장 혼합물 모두 우수한 성능을 발휘하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2013

The development of the oil refining industry has resulted in an annual 120 million tons of sulphur, which is a by-product of the desulphurization process. To exploit this abundance, the applications of sulphur must be expanded. as excellent durability of reuse of leftover sulphur which has high potential for utilization in construction materials, the study is actively in progress. Meanwhile, there has been active research on semi-rigid pavements that draw on the strengths and overcome the weaknesses of asphalt and concrete pavements. Acrylate is used to prevent cracking but involves a high cost, thus, an alternative material is required. As such, this study presents methods on the reuse of leftover sulphur and examines the engineering performance of grout containing sulfur polymer emulsion (SPE) for use in semi-rigid pavements. Our analysis shows that grout in which 30% of acrylate is replaced with SPE has superior properties in terms of time of flow and strength compared to regular grout. However, performance declined when more than 50% of acrylate was replaced by SPE, indicating that the optimum replacement level is 30%. Through SEM analysis, we found that grout with utra harding cement in this study at three hours had similar hydration properties to that of Type 1 Ordinary Portland Cement (OPC) at seven days, and maintained the properties regardless of grout containing SPE. OPC and grout with a replacement level of 30% displayed similar levels of chloride invasion resistance, whereas grout without SPE was far less resistant. Within the scope of this paper, the optimum replacement level of acrylate with SPE was found to be 30% in consideration of various properties such as time of flow, strength, and chloride invasion resistance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.44-50
• /
• 2016

A study to apply phase change material(PCM) to rapid hardening cement paste forming semi-rigid pavement was carried out. The characteristics fresh and hardened paste were evaluated through the experiment for a total of 6 mixtures according to the cement type and the substitution of phase change material for acrylate. The fluidity by substituting phase change material for acrylate satisfied the target flow time of 10 to 13 seconds. In case of setting time, it was possible to secure the performance of rapid hardening cement by substituting phase change material, and if the substitution ratio over 60%, the initial set occurred 1 to 2 minutes faster than other mixtures. In case of compressive strength and bond strength, it showed similar strength characteristics with the plain mixture, and it satisfied both the target compressive and bonding strength of 36MPa and 2MPa. The mixture substituting phase change material showed higher resistance to chloride ion penetration than the mixture only using acrylate and the OPC level was insufficient. From the results of physical and mechanical performances of semi-rigid pavement cement paste, the phase change material substitution rate of 20% was effective in the range of this study.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.157-165
• /
• 2009