• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.407-421
• /
• 1998

The purpose of this paper is to provide and verify an analytical method, based on the spline finite strip method, which can be used to investigate the buckling mode and stress of thin-walled steel sections. Geometric imperfection and initial stress of plates and plate assemblies, which are resulted from various preloadings and may cause prebuckling deformations before buckling, are included in the analysis. Material nonlinearity and residual stress are also considered. It can be applied to sections with simple or non-simple boundary conditions and arbitrary loading. The method has been applied to investigate the buckling behavior of plates and plate assemblies which are subjected to compression with initial imperfections and residual stresses.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.2
• /
• pp.25-33
• /
• 2012

To examine the performance of a thin plate damper attached to coupling beam of bearing wall system, 5 specimens were designed with the variable parameters of the thickness and length of a thin steel plate, which was constructed and tested with a lateral load with up to a 5% drift ratio. The result was that the total amount of the energy dissipation of the specimen with the thin plate damper was greater than that of the standard RC specimen, and the plate buckling and plastic deformation could be seen in steel plate. The shorter the length of the damper, the higher was the lateral resistant force, but there was no apparent increase in the energy dissipation. By comparison of the experiments with the elastic buckling analysis, it was shown that the buckling force from the analysis could properly estimate the maximum value of the linear elastic range.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.829-837
• /
• 1992

This paper presents a new approach for the analysis of hot strip rolling processes. The approach is based on the finite element method and capable of predicting velocity field in the strip, temperature field in the strip, temperature field in the roll, and roll pressure. Basic finite element formulations for heat transfer analysis are described with emphasis on the treatment of numerical instability resulting from a standard Galerkin formulation. Comparison with the theoretical solutions found in the literature is made for the evaluation of the accuracy of the temperature solutions. An iterative scheme is developed for dealing with strong correlations between the metal flow characteristics and the thermal behavior of the roll-strip system. A series of process simulations are carried out to investigate the effect of various process parameters including interface friction, interface heat transfer coefficient, roll speed, reduction in thickness, and spray zone. The results are shown and discussed.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.367-374
• /
• 2012

A dynamic simulation and test of frame with thin walled closed section beams considering warping conditions have been performed. When a beam is subjected under torsional moment, the cross section will deform an warping as well as twist. For some thin-walled sections warping will be large, and accompanying warping restraint will induce axial and shear stresses and reduce the twist of beam which stiffens the beam in torsion. This paper presents that an warping restraint factor in finite element model effects the behavior of beam deformation and dynamic mode shape. The computer modelling of frame is discussed in linear beam element model and linear thin shell element model, also presents a correlation between computer predicted and actual experimental results for static deflection, natural frequencies and mode shapes of frame.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.139-149
• /
• 2002

An explicit direct time integration method based solution algorithm is proposed to predict dynamic postbuckling response of thin plates. Based on the von Karman's plate equations and Marquerre's shallow shell theory, a rectangular plate finite element is formulated and utilized in this study. The element formulation takes into account geometrical nonlinearity and initial deflection of plates. The solution algorithm employs the central difference method. Using the computer program developed by the authors, dynamic postbuckling behavior of elastic thin plates under impact loading is investigated by considering the time variation of load and load duration. The efficiency of the proposed solution algorithm is examined through illustrative numerical examples.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.43-50
• /
• 1990

For constructing the steel structures of ship and automobiles etc, thin plate welding has been extensively used in recent years. However. the welding of plate produces welding deformation and residual stress which sometimes extremely harm to the safty of structure in the course of construction and operation. Therefore, in order to accurately prediet the welding deformation and residual stress, it is important to exactly analyze the distribution of temperature during welding in thin plate and take into account the moving effect of the heat source. In this paper, two dimensional unstationary heat conduction problemes of thin plate are formulated using an isoparametric finite element. After the development of the computer program, this method is applied to some specimens, and the analyzed results are compared with the experimental ones to confirm the usefulness of this method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.57-62
• /
• 1992

박판 성형 공정에서는 복잡한 실제 차체판넬을 금형설계단계에서 빠르고 효율적으로 해석하기 위해 평면 변형 문제로 취급할 수 있는 많은 국부 단면들에 대해 단면 해석방법이 쓰이고 있다. 최근에 박박이론 및 굽힘 에너지가 보강된 박막 요소에 근거한 내연적 강소성 유한 요소 해석이 많이 연구되어 왔다. 본 연구에서는 박판 성형 공정의 단면 해석을 위해 외연적 강소성 유한 요소법을 사용하였고, 접촉처리는 직접적 시행착오법을 사용하였다. 또한 본 연구의 적합성을 보이기 위해 평면 변형을 가정한 실린더형 펀치 스트레칭과 트렁크 리드 대칭 단면을 해석하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.3-10
• /
• 1997

합체 박판을 사용한 생산 방식은 소수의 스템핑 금형 공정으로 인해 전반적으로 공기가 짧아지고, 보다 견고하며 외관상 우수한 차체를 생산할 수 있다. 또한 재료의 수율을 극대화할 수 있을 뿐만 아니라 차체 각부에서 요구되는 성질과 조건에 따라 판 두께나 재질을 대응할 수 있다는 등의 장점을 가지고 있어 초기긔 설비비는 다른 생산 방식에 비해 고가이지만 전체 공정과 장기적인 관점에서 생산비가 절감된다. 본 기고에서는 합체 박판의 생산 및 활용정도와 각 기업체나 연구소들에서의 연구 진척상황, 그리고 앞으로의 전망에 대해 논한다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.79-79
• /
• 2002

반도체 패키징 열관리 재료로 널리 사용되는 W-Cu 시스템을 택하여 대면적 양산성이 낮은 기존의 공정과는 달리 테입캐스팅 공정을 적용하여 W-Cu 박판재를 그린 테잎 형태로 제조하여 탈지후 소결하는 저비용 양산화 공정을 개발하였다. 테입 캐스팅, 적층 및 탈지, 소결공정을 거쳐 제조하였고, 이때 탈지 및 소결조건에 따른 미세조직, 소결밀도, 변형등의 물성을 분석함으로써 휨과 변형이 최소화된 W-Cu 박판재를 제조할수 있었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.218-224
• /
• 1998

본 논문에서는 컬러 모니터용 전자관(CDT; Color Display Tube)의 편향 요크(DY; Deflection Yoke)의 제조 공정상 오차가 발생시키는 컨버전스의 오차를 보정하기 위하여 붙이는 페라이트 박판(Ferrite Sheet)의 위치를 결정하는 규칙을 생성하는 박판을 붙여야 하는지 판단한다. 이를 러프 집합 이론을 이용하여 컨버전스 값을 조건부 속성으로, 페라이트 박판의 위치를 판단부 속성으로 하여 판단 테이블을 만들고 이때 발생하는 몇 가지 문제를 해결하여 최소화된 규칙을 찾아내는 방안을 제안한다.