• 대한설비공학회지:설비저널
• /
• 제22권3호
• /
• pp.207-219
• /
• 1993

• 한국통신학회논문지
• /
• 제38B권2호
• /
• pp.105-114
• /
• 2013

인체영역 무선네트워크(WBAN)기술 기반의 생체정보 모니터링서비스의 확장과 성장은 생체신호 감지 및 측정, 생체정보의 원격제어, 실시간 모니터링기술의 진화를 가속화시키고 있다. 기술진화에 대응한 선행기술 확보와 시장선점을 위해 생체정보 모니터링 시스템의 설계 및 구축은 최신 기술 동향과 표준화 이슈의 전략적인 반영이 필수적이다. 논문은 기술 및 연구개발 동향과 이슈를 조사, 분석하고 기술적 대응과제를 제시한다.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.163-170
• /
• 2013

There are many pros and cons for whether smart glasses and watch would be further going technology or not beyond smart phone. What have to do domestically is to find acting ways to catch up with technological gap in short term basis through analyses and investigations in technological issues, patents profile, market forecast. In this paper, firstly we investigate and review technological issues and form factors of smart glasses and HMD, and secondly analyze technological tendency and identify their core technology and intension from global key player's patents analyses connected with smart glasses, and conclusively suggest technological prospects and it's countermeasures.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.347-350
• /
• 2001

The dextran prodution by Leuconostoc mensenteroids NRRL-B512F was studied in a synthetic medium from sucrose as a sole carbon source. Especially, effect of nitrogen source was treated and compared in this study. In oder to maximize the cell growth and dextran produtivity through fermentation two nitrogen sources, yeast extract and tryptone, were used with various concentrations. At the end of fermentation, when the concentration of yeast extract was 9g/L we can obtain the maximum dry cell weight(14.1g/L), dextran dry weight(25.4g/L) and productivity(1.4g/L ${\cdot}$ hr).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.147-150
• /
• 2002

The cure kinetics of blends of epoxy (DGEBA:diglycidyl ether of bisphenol A)/anhydride (NMA:nadic methyl anhydride) resin with synthesized amino terminated polyetherimide (AT-PEI) were studied using differential scanning calorimetry (DSC) and Dynamic Mechanical Analysizer(DMA) under isothermal condition to determine the reaction parameters and gel-vitrification behavior. The fracture toughness of AT-PEI 20phr/epoxy resin system was improved over 224% and 42.5% more than neat epoxy resin and commercial PEI/Epoxy Resin System.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.96-107
• /
• 1997

The recent stream to reliability prediction is that it is totally inclusive in depth to consider even the operating and environmental condition at the level of finished goods as well as component itselves. In this study, firstly we present the reliability prediction methods by entire failure rate model which failure rate at the system level is added to the failure rate model at the component level. Secondly we build up the improved bases of reliability demonstration through a, pp.ication of Kaplan-Meier, Cumulative hazard, Johnson's methods as non-parametric and Maximum Likelihood Estimator under exponential & Weibull distribution as parametric. And also present the methods of curve fitting to piecewise failure rate under Weibull distribution, PRST (Probability Ratio Sequential Test), curve fitting to S-shaped reliability growth curve, computer programs of each methods. Lastly we show the practical for determination of optimal burn-in time as a method of reliability enhancement, and also verify the practical usefulness of the above study through the a, pp.ication of failure and test data during 1 year.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.204-207
• /
• 2003

Pullulan as useful biopolymer has been focused on its industrial production. The objectives of this thesis were to enhance the production of pullulan for the industrial production and to characterize pullulan physical properties. In order to find the economical optimum of the fermentation conditions and promote pullulan productivity, effect such as the carbon source, pH have been estimated and measured molecular weight of produced pullulan.

• 품질경영학회지
• /
• 제23권4호
• /
• pp.148-156
• /
• 1995

많은 Buyer들이 품질의 기본조건으로 요구하는 완제품 Burn-in 시간은 실제 필요 이상으로 긴 시간일 수 있으며 생산자 입장에서 Cost, Delivery, Capacity 등의 제약으로 이행하기 어려운 경우가 종종 있다. 본 연구는 생산자에게 실무적으로 적용이 용이하고 Buyer에게 설득력있는 최적 Burn-in 시간 근거를 제시할 수 있도록, 구간개념과 Curve Fitting 방법을 적용하여 최적 Burn-in 시간을 추정하고 시간대별 Reliability를 산출 비교해 봄으로서 생산자 입장에서 Burn-in 시간을 결정하고 Reliability 추정 Model을 결정해 갈 수 있도록 하였다. 향후 제시된 Burn-in 시간의 최적여부는 Field Data로부터 검증되어야 할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.656-659
• /
• 1993

The failure phenomenon of Dual Basalt Fibers Reinforced Epoxy Composites(DFC) under tensile load was studied using acoustic emission(AE) technique. AE amplitude and AE energy were mainly associated with the internal microscopic failure mechanism of DFC specimen, such as fiber fracture, matrix cracking, and fiber/matrix debonding. Fiber failures in the DFC specimens were distinguishable by showing the highest AE energy amplitude. They were dependant on the fiber diameters. Matrix cracking was determined from the relatively lower AE amplitude and AE energy, whereas fiber/matrix debonding could not be successfully isolated. AE method, however, can be applicable to the fragmentation method for interfacial strength(IFSS) in DFC specimens with adjusting the threshold to isolate fiber breaks from matrix crack and debonding.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.250-255
• /
• 1998

DUPIC 핵연료 개발에서는 소결체의 물성연구와 노내거동부터 연구를 시작하여 신 개념의 핵연료의 개발에 부합되는 조사시험 계획이 수립되어야 하기 때문에 DUPIC소결체의 물성 및 노내거동 연구를 캡슐을 이용하여 조사시험을 수행할 계획이다. 본 논문에서는 노외 시험 및 예비 특성화(Pre-Characterization)와 노내시험인 DUPIC 핵연료 소결체 시험 그리고 연료봉 조사시험에 필요한 항목들에 대하여 분석하였으며 DUPIC 소결체가 하나로 노심의 CT, IR2, IP9등에서 무계장 캡슐을 이용하여 조사될 경우의 출력을 평가 하였다. 또한 모의 핵연료와 DUPIC 핵연료 소결체의 조사시험을 위해 무계장 캡슐 (Capsule)에 대하여 연구 하였다.