• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were sifted rearward and the wake region was smaller than that of the smooth cylinder.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.233-239
• /
• 2002

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were silted rearward and the wake region was smaller than that of the smooth cylinder.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.954-961
• /
• 2008

An experimental study has been conducted to investigate the flow field around the wing having a circular damage hole. The damage was represented by a circular hole passing through the model with 10% airfoil chord diameter and normal to the chord. The hole was centered at quarter or half chord. The PIV flow fields and static pressure measurements on the wing upper and lower surface were carried out at Rec=2.85×105 based on the chord length. The PIV results showed the two types of flow structures around a damage hole were formed. The first one was a weak jet that formed an attached wake behind the damage hole. The second one resulted from increased incidence; this was a strong jet where the flow through the hole penetrates into the free-stream resulting in extensive separation of oncoming boundary layer flow and development of a separated wake with reverse flow. The surface pressure data showed a big pressure alteration near the circular damage hole. The severity of pressure alteration was increased as a damage hole located nearer to the leading edge.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.153-158
• /
• 2005

The turbulent shear flaw around a surface-mounted vertical wall was investigated using the two-frame PIV(CACTUS 3.1) system. From this study, it is revealed that at least 500 instantaneous velocity field data are required for ensemble average to get reliable turbulence statistics, but only 200 field data are sufficient for the time-averaged mean velocity information The flow has an unsteady recirculation region post vertical wall with bottom gap, followed by a slow relaxation to the fiat-plate boundary layer flow. The time-averaged reattachment length estimated from the streamline distribution is about x/H=3H. The large eddy structure in the separated shear layer seems to have signification influence on the development of the separated shear layer and the reattachment process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1510-1520
• /
• 1996

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purpose of the present study is to investigate the effect of the separating streamline curvature on the reattachment length and to understand the structure of recirculating flows. Local mean and fluctuating velocity components were measured in the separating and reattaching axisymmetric region of turbulent boundary layer on the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. The study demonstrates that the reattachment length increases with increasing separating streamline curvature. It is also observed that the reverse flow velocity and turbulent kinetic energy increase with an increase in the separating streamline curvature. In addition, the behavior of maximum turbulent stresses show that the effect of separating streamline curvature is larger in the region of recirculating zone(X/H<2) than in the region of reattachment point.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.933-945
• /
• 1994

A shock-wave in a supersonic flow can be theoretically determined by a given pressure ratio at upstream and downstream flowfields, and then the obtained shock-wave is stable in its position. Under the practical situation in which the shock-wave interacts with the boundary layer along a solid wall, it cannot, however, be stable even for the given pressure ratio being independent of time and oscillates around a time-mean position. In the present study, oscillations of a weak normal shock-wave in a supersonic diffuser were measured by a Line Image Sensor(LIS), and they were compared with the data of the wall pressure fluctuations at the foot of the shock-wave interacting with the wall boundary layer. LIS was incorporated into a conventional schlieren optical system and its signal, instantaneous displacement of the interacting shock-wave, was analyzed by a statistical method. The results show that the displacement of an oscillating shock-wave increase with the upstream Mach number and the dominant frequency components of the oscillating shock-wave are below 200 Hz. Measurements indicated that shock-wave oscillations may not entirely be caused by the boundary layer separation. The statistical properties of oscillations appeared, however, to be significantly affected by shock-induced separation of turbulent boundary layer.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.281-290
• /
• 2015

Numerical simulations of free surface flow over a broad-crested rectangular weir are conducted by using the volume of fraction (VOF) method and three different turbulence models, the k-${\varepsilon}$, RNG k-${\omega}$ and k-${\omega}$ SST models. The governing equations are solved by a second-order accurate finite volume method and the grid sensitivity study of solutions is carried out. The numerical results are evaluated by comparing the solutions with experimental and numerical results of Kirkgoz et al. (2008) and some non-dimensionalized experimental results obtained by Moss (1972) and Zachoval et al. (2012). The results show that the present numerical model can reasonably reproduce the experimental results, while three turbulent models yield different numerical predictions of two distinct zones of flow separation, the first zone is in front of the upstream edge of the weir and the second is created immediately behind the upstream edge of the weir where the flow is separated to form the separation bubble. The standard k-${\varepsilon}$ model appears to significantly underestimate the size of both separation zones and the k-${\omega}$ SST model slightly over-estimates the first separation zone in front of the weir. The RNG k-${\varepsilon}$ model predicts both separation zones in overall good agreement with the experimental measurement, while the k-${\omega}$ SST model yields the best numerical prediction of separation bubble at the upstream edge of the weir.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.511-514
• /
• 2009

현재 일반적으로 사용되는 300cc 소형엔진 기화기의 최적화 및 성능 향상을 위하여 유동해석을 수행하였다. 베르누이의 정리를 기본으로, 성능을 발휘하는 주요 설계인자인 기화기 내부의 벤튜리 튜브의 각도, 길이 등을 변수로 하여 유동해석을 수행하였다. 그 결과를 분석하여 최적화된 모델을 제시하였다. 결론적으로, 유동 해석을 바탕으로 기존 사양 대비 향상된 성능의 모델을 제시하였다. 유동해석을 통해 기화기 내부의 벤튜리관에 곡면(Rounding)처리를 적용함으로 기화기에서 소모되는 흡기저항을 줄여 펌핑로스를 저감활수 있음을 확인하였다. 펌핑로스의 저감은 엔진 연비의 향상과 엔진토크에 긍정적 효과로 작용할 것으로 기대된다. 벤튜리관의 출구 각도를 감소시킴으로 박리를 개선하여 Dead Volume을 줄임으로서 기존 모델에 대비하여 원활해진 유동의 흐름을 얻을 수 있었다. 이는 흡기유량을 증대시키고 엔진출력을 상승시키는 효과로 작용할 것으로 예상된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.295-298
• /
• 1997

Recycl ing of PP/EPR based bumper coated with polyester urethane paint has been per formed by chemical decoating method. Electronic Speckle Pattern Interferometry (ESP11 has been applied to characterize the deformation of polyolef in based bumper. In additon, physical properties and processability of recycled materials have been investigated by dynamic mechanical thermal analysis, impact test and melt flower index measurement. The results show that the deformation ratio of recycled material is higher than that of virgin one. The morphological change of EPR, degree of distribution and dispersion during the recycling process seem to be the most important factor for the deformation and the mechanical properties of recycled materials. The experimental results obtained show that ESPI is very powerful technique to study the thermal mechanical property of polyolefin bumper system.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2
• /
• pp.71-78
• /
• 1998

와(vortex) 박리는 고형물체가 유동내에서의 유체의 흐름을 방해할 때 발생하는 전 형적인 주기적 진동 현상이다. 본 연구에서는 삼각주형 실린더가 유동내에 유발하는 와 발 리 특성을 가시화 기법, 와에 의해 변조된 초음파의 파워 스펙트럼 및 유동관에서의 진동측 정 등을 통해 연구하였다. 가시화 관찰과 유동측정 실험 결과, 발생 와는 발생체 전면으로부 터 3d와 5d 사이에서 가장 안정성이 유지됨을 발견하였다. 넓은 레이놀즈 수(104≤Re≤106) 의 유동영역에서 액체와 기체원형유동의 측정 실험결과로부터 스트로우할(Strouhal) 수가 와발생체 폭(d)과 형상비(d/D)의 증가함수이며, 삼각주 단면의 높이에 반비례함을 알 수 있 었다. 또한 실험 결과로부터 실린더의 기하학적 치수로 삼각주형 실린더의 스트로우할 수를 예측할 수 있는 경험식을 제시하였다.