• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.276-285
• /
• 2005

본 과제에서는 참여기업인 두산인프라코어(구 대우종합기계)에서 양산중인 국산디젤엔진을 개조해 가스엔진을 제작하였으며, 두산인프라코어에서 500시간 내구시험을 2차례 실시하였고, 주관기관인 한국기계연구원에서 국산 ECU를 활용하여 도시가스를 연료로 실험을 수행한 후 김포매립지에서 현장 적용실험을 수행하였다. 메탄농도가 46$\sim$56%로 변하는 조건에서 350kW의 출력을 달성하였으며, 삼원촉매를 적용한 결과 2005년 배기규제를 만족하는 결과를 도출하였다. 위탁기관인 전남대에서는 촉매 특성에 관한 실험을 1차년도와 2차년도에 수행하였다. 본 과제에서 개발한 LFG(=매립지가스) 엔진은 국내에서 개발된 최초의 LFG 엔진으로서 쓰레기 매립지 뿐만 아니라 음식물 쓰레기 혐기소화 처리과정, 분뇨나 축분 등의 혐기소화 처리과정, 하수종말 처리장 등에서 발생하는 바이오가스를 이용한 발전 동력원으로 사용될 수 있을 것으로 기대된다.

• 보일러설비
• /
• 통권89호
• /
• pp.57-59
• /
• 2001

자원고갈로 인해 국가적 사명을 투자되고 있는 대체에너지 개발은 현재 답보상태에 머물고 있다는 평가가 지배적이다. 고유가 시대 도래로 인해 에너지비용이 증가하고 대외적으론 기후변화협약시대가 다가오면서 국내 산업체에겐 대체에너지 개발보급은 절대절명의 과제로 떠오르고 있다. 이는 심야전력 보급에서 정책적인 문제를 드러내면서 더욱 절실히 요구되는 실정이다. 그럼에도 현재 대체에너지 개발보급은 그동안 기술개발에 치중해 보급에는 문제점을 들어내고 있는 상태다. 88년부터 2000년말까지 태양열, 연료전지 등 11개 분야에 1742억원이 투자되었다. 부문별 보급실적을 보면 태양열의 경우 태양열 온수기 18만 5천대와 급탄설비 3천대, 태양관의 경우 마라도등 12000개소에 약 4000kw, 풍력은 제주지역 등 17기를 보급, 약8000KW, 폐기물은 서울 경기 부산 등에 473기를 설치 가동중에 있다. 이 대체에너지의 현재 비중을 보면 폐기물이 $93.4{\%}$, 바이오 $3.3{\%}$, 태양열 $2.1{\%}$, 소수력 $0.8{\%}$등으로 나타났다. 현재 정부는 2003년까지 대체에너지 $2{\%}$보급을 목표로 하고 있다. 그러나 대체에너지는 산발적인 기술개발 과제추진으로 인해 특정분야의 전략적 개발 보급에 문제를 드러내는 등 회의적이다. 이와 함께 정부에만 매달려 있는 업계의 자립부족이 큰 문제점으로 지적되고 있다. 이러한 문제를 해결하기 위해선 현재의 개발과 보급의 괴리를 해결할 보완책을 제시하고, 정부는 기술성 경제성 시장성을 동시에 고려하는 체계적인 계획을 세워야 한다.

• 신재생에너지
• /
• 제6권2호
• /
• pp.27-32
• /
• 2010

Low Calorific Gas Turbine (LCGT) has been developed as a next generation power system using landfill gas (LFG) and biogas made from various organic wastes, food Waste, waste water and Livestock biogas. Low calorific fuel purification by pretreatment system and carbon dioxide fixation by green house system are very important design target for the optimum applications of LCGT. Main troubles of Low Calorific Gas Turbine system was derived from the impurities such as hydro sulfide, siloxane, water contained in biogas. Even if the quality of the bio fuel is not better than natural gas, LCGT may take low quality gas fuel and environmental friendly power system. The mechanical characterisitics of LCGT system is a high energy efficiency (>70%), wide range of output power (30 kW - 30 MW class) and very clean emission from power system (low NOx). A green house has been designed for four different carbon dioxide concentration from ambient air to 2000 ppm by utilizing the exhaust gas and hot water from LCGT system. LCGT is expected to contribute achieving the target of Renewable Portfolio Standards (RPS).

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.115-120
• /
• 2006

Our environment is faced with serious problems related to the air pollution from diesel engines in these days. In particular, the exhaust emissions of agricultural diesel engines are recognized main cause which influenced environment strongly. In this study, the potential possibility of biodiesel fuel was investigated as an alternative fuel for a naturally aspirated agricultural D.I. diesel engine. The smoke emission of biodiesel fuel was reduced remarkably in comparison with diesel fuel, that is, it was reduced approximately 50% at 2500 rpm, full load. But, power, torque and brake specific energy consumption didn't have large differences. But, NOx emission of biodiesel fuel was increased compared with commercial diesel fuel. Also, the effects of exhaust gas recirculation (EGR) on the characteristics of NOx emission has been investigated. It was found that simultaneous reduction of smoke and NOx was achieved with biodiesel fuel (20vol-%) and cooled EGR method($5{\sim}15%$) in an agricultural D.I. diesel engine.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.25-32
• /
• 2013

Biodiesel is technically competitive with it and offers technical advantages over conventional petroleum diesel fuel. Biodiesel is an environment friendly alternative liquid fuel that can be used in any diesel engine without modification. In this study, (dP/dCA)max and heat release, emission characteristics with different fuel injection timings are compared between diesel fuel and biodiesel in the D.I. diesel engine with T/C. The engine was operated at five different fuel injection timings from BTDC 6deg to 14deg at 2deg intervals and with four different loads at engine speed of 1800rpm. The experiments in a test engine showed that ranges between low and high of (dP/dCA)max got narrower, as the engine load increased, BD blend rate increased, and fuel injection timing was delayed. Cumulative heat release increased with the advanced fuel injection timing. NOX emissions decreased with the delays of fuel injection timing.

• 한국농공학회논문집
• /
• 제48권3호
• /
• pp.63-71
• /
• 2006

A downdraft gasifier was made of stainless steel for biomass gasification. Internal reactor had a 300 mm diameter and 8 air intakes. Three thermocouples were installed to measure the temperature inside the reactor. Three different biomass fuels were provided in the experiments to find out the effects of fuel conditions on gasification processes; charcoals, woodchips, and mixture of woodchip and charcoals. Two different experiments were conducted fer charcoal experiments, small and larger sizes of charcoal fuels. It took about 10 minutes after ignition to generate combustible producer gas when charcoal was f9d, but 20 or more minutes for woodchips. When the gasification was stabilized, the highest temperature was observed just below the combustion zone. The air flow rate for woodchip experiment was provided at 25% of a stoichiometric requirement of combustion, which was within the range of typical air flow rate fer woody biomass gasification. Carbon monoxide concentrations were also within the values reported in the previous studies, ranging 20 to 30% depending on fuel types. It could be seen that fuel size and heating value were very important parameters in biomass gasification. These parameters should be taken into account in operating and designing biomass gasifiers.

• 한국연소학회지
• /
• 제16권3호
• /
• pp.52-58
• /
• 2011

The purpose of this paper is to investigate the effect of equivalence ratio on the combustion and emission characteristics of a compression ignition engine fueled with biodiesel. In this research, a single-cylinder direct injection engine with 373.3 cc of displacement volume was tested on DC dynamometer. In order to investigate the effect of biodiesel equivalence ratio on combustion characteristics, the experiments were conducted at various equivalence ratios and injection pressures of 40~120 MPa. For investigating engine performance, lambda meter was connected and equivalence ratios was varied from 0.6 to 1.0. In addition, the exhaust emissions such as oxides of nitrogen($NO_X$), hydrocarbon(HC) and carbon monoxide(CO) were measured by exhaust gas analyzer under the various air/fuel ratios. The experimental results show that maximum IMEP was measured at the 0.8 of equivalence ratio. Furthermore, $NO_X$ emission was rapidly decreased as the increase of equivalence ratio. However soot emission was significantly increased according to the increase of equivalence ratio.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.740-753
• /
• 2013

It is valuable research area regarding to developing manufacturing process of biogas from organic wastes take a side view of alternative for fossil energy and to improve the environmental atmosphere leads to decrease the greenhouse gas be discharged. The regulation which is prepared by environmental department shows that biogas as a transportation fuel is required to purity of above 95%, while it of natural gas is above 88%. However, in this situation it is necessary to prepare the regulation which is distributed by department of transportation as for the fuel be connected to vehicles as well in order to take step forward, and it is suggest to develop the technics of biogas this country's own original one, not be the technics imported from foreign countries, and also to turn to higher practical use of biogas for transportation area, since it shows far much less ratio have compared to other application areas.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.287-293
• /
• 2008

As the instability of international societies on the energy resources has increasingly been deepened due to excessive use of fossil fuels, the importance of energy saving and global environment protection has highlighted, So the interests in environment-friendly and stable new & renewable energy have been dramatically increased. The studies on reconstructing the old-fashioned towns economically, socially and physically have been also significantly increased. In this urban regeneration, renewable-energy using systems were aggressively applied to overcome the energy and environmental problems of the existing towns. There have been many of studies on the compound applications of the renewable-energy using systems in the advanced countries while they are insufficient in Korea. As a preliminary study of urban renewable-energy using system development, this paper surveyed the foreign cases applied to key technologies such as geothermal energy, hydrogen fuel cell and bioenergy among the renewable-energies in urban built environment.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.156-163
• /
• 2014

Diesel engine is most suitable one for biodiesel fuel because the compression-ignition diesel engine has desirable fuel consumption due to higher thermal efficiency and in addition, the improvement of the fuel consumption also leads to a reduction of $CO_2$ emission and then it does not need to have spark-ignition system, which means that there is less charge on the technic and complexity. In this study, the spray behavior characteristics of the vegetable palm oil were analyzed by using a common-rail injection system of commercial diesel engine and the results were compared with those obtained for the diesel fuel. The injection pressures and blend ratios of palm oil and diesel(BD3, BD5, BD20, BD30, BD50, and BD100) were the main parameters. The experiments were conducted for different injection pressures: 500bar, 1000bar, 1500bar, and 1600bar by setting injection duration to $500{\mu}s$. Consequently, it was found that there is no significant difference in the macro characteristics of the spray behavior(spray penetration and spray angle) in response to change in the blend ratio of palm oil and diesel at a fixed injection pressure. In particular, all experiments showed the spray angle about $12^{\circ}{\sim}13^{\circ}$.