• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.28-35
• /
• 2015

In this study, the experiment was carried out to produce methane by applying Semi-Continuous Leachate Recirculation Anaerobic Digestion System fed with source separated food waste from school cafeteria. There were two systems and each system consisted of a bioreactor and a liquid tank. Each bioreactor had a screen near the bottom of the reactor. 2.5L of separated liquid was transferred to the liquid tank for 30min each day by using a tubing pump and the liquid from the liquid tank was pumped to the bioreactor at the upper of the bioreactor as soon as the transfer was ended. Through this circulation, the liquid having high concentration of VFAs was supplied to the top of bioreactor. At the beginning of the experiment, food waste/inoculum anaerobic sludge volume ratio was 2:8 that is 9g VS/L of OLR(Organic Loading Rate). Feeding was conducted every two weeks. Experimental results showed that the contents of moisture, combustible matter, ash were 65.91%, 32.73%, and 1.36%, respectively. Two different food waste loading were studied. The average organic loading rates were 3.51g VS/d for System A and 3.86g VS/d for System B, respectively. The average produced methane based on food waste fed to bioreactor were observed as $6.30m^3CH_4/kgVS{\cdot}d$ for system A and $4.94m^3CH_4/kgVS{\cdot}d$ for System B, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.42-48
• /
• 2011

This preliminary study is about the application of the compound source to the active noise barrier system as control sources. A compound source is composed of two monopole sources but having opposite phase. However, both monopole sources in one compound source are not independently controlled. The source strength of monopole source close to the noise source is proportional to the other one. Therefore, the cost for the hardware system is cheaper than usual system but known to possibly having a similar performance in generating anti-noise acoustic field. In this study, using a simple active noise barrier system model having a non-reflective floor, the effectiveness of the system with compound sources is investigated through computer simulations and shows 30~40 % performance improvement of noise reduction.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.80-85
• /
• 2011

The crystallization behavior and microstructural change of the glass-ceramics were analyzed as a function of concentration and etching time of the HF solution in order to enhance the degree of crystallinity induced by heterogeneous nucleation of glass of bottom ash containing 15 wt% $Li_2O$. The nucleation site seemed to be generated where the Si ion was eluted. The main crystal phases in the glass-ceramics fabricated in this study were $\beta$-spodumene and $Li_2SiO_3$. The specimens etched with HF of 0.5 vol% within 0~60 seconds showed increased crystalline peak intensities in XRD pattern with etching time compared to no-etched one. Also the crystal size and crystal occupancy in the glass matrix observed by SEM were increased with etching time. For the glass-ceramics etched with 1.0 and 2.0 vol% HF solution, the etching time over 10 s was not effective to increase the crystallinity. From this study, it was found that the glass-ceramics with the higher crystallinity could be obtained by HF-etching followed by heat treatment process, even though the nucleating agent or 2-stages thermal treatment process were not used.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.43-46
• /
• 2011

The noise characteristics of multi-purpose dive support vessel show the different patterns such as types of noise sources, accommodation arrangement and etc due to its operation. Especially, the tunnel and retractable thruster for the dynamic positioning should be considered at the noise analysis. The floating floor is selected as the main measure of noise reduction and is constructed at the deck near the noise sources. In this paper, the noise analysis of dive support vessel is based on the estimation of noise sources and floating floor and SEA (Statistical Energy Analysis) is used for analysis of the air-born noise and structure-borne noise. The noise analysis of air conditioning system is also carried out and the noise results of cabin room are reviewed.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.55-61
• /
• 2010

Fire resistance is very essential for all buildings to save peoples who live within buildings or use and to protect the properties when the buildings are covered with fire. The fire resistance were evaluated by loading or nonloading fire tests which are known very expensive and require lots of time. That causes the lacks of research activities and there are only small cases of fire resistance. The purposes of this paper are to analyze the temperature analysis for various structural elements such as columns and beams those are can be applied to buildings and to suggest the resonable fire protective thickness of concrete slab according to the required fire resistance time.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.86-87
• /
• 2016

본 논문에서는 optical flow sensor를 이용하여 실내의 바닥 영상인식를 통한 영상처리기법을 이용해 움직임 없는 hovering을 할 수 있는 방법을 제안한다. 또한 optical flow와 BLE finger printing 기법을 혼합해 위치 인식 정밀도를 높일 수 있다. 본 고에서는 optical flow sensor와 BLE finger printing의 두 기술을 혼합하면 드론 스스로 실내에서 정밀도 높은 위치인식이 가능 하며 실외에서만 사용할 수 있는 GPS 비행모드를 대신 할 수 있어 실내에서 자동 경로 비행이 가능하게 하고 위치 안내, 실내 방송촬영, 이동식 CCTV등 질 높은 서비스를 제공하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.422-422
• /
• 2012

지하수개발 이용의 허가시 지하수 양수로 인한 주변지역에 미치는 영향을 조사하여 지하수의 고갈과 오염을 예측하고 이를 사전에 방지함으로써 지하수의 보전과 합리적인 이용을 도모하고자 지하수영향조사제도가 시행되어 왔다. 특히 하천구역의 경계로부터 300미터 내의 지역에서 지하수를 개발 이용하는 경우에는 지하수영향조사서를 첨부하여 국토해양부장관과 미리 협의하도록 되어있고, 이 때 지하수개발 이용이 하천의 수량에 영향을 미친다고 인정하는 경우에는 취수량 취수 기간의 제한 및 취수 금지 등을 요청할 수 있다. 그러나, 하천인근의 지하수 양수가 하천수에 미치는 영향을 정량적으로 평가할 수 있는 기법이 마련되어있지 않아 실무적으로 지하수영향조사 및 허가 절차상 어려움을 겪고 있다. 따라서 본 연구에서는 지하수 이용에 따른 하천수량 변화를 예측할 수 있는 간편 상관관계식을 지표수-지하수 통합모의 결과를 이용하여 유도 제시하였다. 지표수-지하수 통합모의를 위해서 SWAT-MODFLOW 결합모형을 적용하였고, 두 개의 시험유역에 대해 가상의 양수정 설치에 따른 하천수량 변화량을 평가하는 시나리오 분석을 수행하였다. 상관관계는 다중회귀분석을 통해서 하천수 감소량을 지하수 양수량, 하천과 양수정 이격거리, 대수층 및 하천바닥의 수리전도특성, 강수량 등의 함수로 나타내었다.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.97-105
• /
• 2014

Artificial precipitation ponds, consisting of three steps of oxidation pond, successive alkalinity producing system (SAPS) and swamp, were constructed for the treatment of the acid mine drainage from the Iwal coal mine. The efficacies of the passive treatment system in terms of neutralization of mine water and removal of dissolved ions were evaluated by the chemical analyses of the water samples. Mine water in the mine adits was acidic, showing the pH value of 2.28-2.42 but the value increased rapidly to 6.17-6.53 in the Oxidation pond. The purification efficiencies for the removal of Al and Fe were 100%, whereas those of $SO_4$, Mg, Ca, and Mn were relatively low of 50%, 40%, 24%, and 59%, respectively. These results indicate a need for application of additional remediation techniques in the passive treatment systems. The precipitates that formed at the bottom of the mine water channels were mainly schwertmannite ($Fe_8O_8(OH)_6SO_4$) and those in the leachate water were 2-line ferrihydrite ($Fe_2O_3{cdot}0.5H_2O$).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.76-83
• /
• 2017

Fish respond sensitively to light, so it is possible to develop fish management technology using this feature. In this study, we developed a light-based fish barrier and analyzed itsblocking effect using the difference in illuminance for the major fish species in Korea, bass and bluegill. The light was generated by a light emitting diode and the facility was installed vertically from the bottom. Considering the fish's ability to travel upstream, the flow rate was divided into three stages (0.2, 0.1, and 0.05 m/s). To prevent the learning effect, an experiment was carried out with fish that had rested for more than one day in a rearing tank. The experiment was carried out in such a way as tocompare the number of fish which travelled upstream after the introductionof the fish barrier and that of the fish which travelled upstream after itsremoval. It was also carried out after sunset to increase the effectiveness of the barrier. According to the results of the experiment, the fish blocking effect depending on the difference in illuminance was high and, overall, the blocking rate for bass was lower than that for bluegill. Based on the total size of the experimental population, the blocking rates for bass and bluegill were 96.33% and 99.00%, respectively. Based on the number of fish that travelled upstream, the blocking rates for bass and bluegill were 91.73% and 98.73%, respectively.