• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.94-94
• /
• 2022

본류와 지류가 만나는 하천 합류부에서 발생하는 복잡한 흐름 구조는 하상변동에 영향을 주며, 본류와 다른 특성을 보이는 지류의 유입은 수질과 수생태계에도 영향을 준다. 합류부는 하천 변화의 다양성을 보이기 때문에 하천 관리 측면에서 중요한 구간으로, 흐름 및 혼합 특성 이해가 중요하다. 합류부에서의 흐름 및 혼합은 본류와 지류의 유량비, 밀도차, 단차, 합류각, 하도형상 등의 영향으로 그 양상이 달라지며, 흐름장 및 두 수체에 의한 이송물질의 혼합이 이루어졌다고 간주하는 혼합거리는 지류가 본류에 미치는 영향 범위 분석을 위한 중요한 매개변수이다. 본 연구에서는 합류부 흐름에 미치는 주요 인자 중 유량비와 밀도차가 합류부 흐름 및 혼합에 미치는 영향을 수치해석을 통해 분석하고, 조건의 변화에 따른 혼합거리를 예측해 보고자 한다. 본 연구의 대상 지역인 낙동강-황강 합류부는 다기능보와 댐의 운영에 따라 유입 유량 및 유량비가 조절되며, 여름철에는 황강의 수온이 낙동강보다 평균 4℃ 이상 낮으며, 9℃(지류 20℃; 본류 29℃) 이상의 수온차가 발생하기도 한다. 이 경우 밀도비는 0.998로 밀도류가 발생할 수 있는데, 밀도류가 발생할 경우 수표면과 저층이 분리되어 흐르기 때문에 동일 유량 조건에서도 혼합 양상은 달라진다. 밀도류가 발생하기 위해서는 수표면과 저층이 분리되는 성층이 발달해야 하는데, 이는 유속 또는 유량의 범위에 따라 성층의 발달 여부가 달라질 수 있다. 이러한 현장 조건을 반영한 수치해석을 통해 다양한 유량 조건(유량비)에서 밀도의 차이(수온차)가 합류부의 흐름 및 혼합에 미치는 영향을 분석해 보고자 하며, 합류부에서 밀도차에 의한 흐름의 변화 조건을 무차원수(Richardson number, Densimetric Froude number 등)를 통해 정량화해보고자 한다. 이는 지류가 본류에 미치는 영향의 정도와 범위를 파악함으로써 하천 관리를 위한 관측망 및 현장 조사의 범위 선정의 기초자료 마련뿐 아니라 본류의 수온 변화가 발생할 수 있는 범위의 파악을 통해 수생태계에 미치는 영향 파악을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.51-65
• /
• 2003

A series of numerical simulations were carried out using STOMP( Subsurface Transport over Multiple Phase) simulator. The flow and distribution of LNAPL were analyzed in homogeneous fine and coarse sand. Vertical movement of LNAPL is faster in the coarser sand. But the total volume of LNAPL retained in the unsaturated zone is larger in the finer sand. A fine layer in the coarse sand domain is also simulated. The results showed that the retained LNAPL volume and shape are highly influenced by the Position of the fine layer. Flow and distributions of LNAPL were simulated when there were heterogeneous lenses in the sand domain. Water table fluctuation was also considered. In these cases, it was found that the heterogeneous lens was a barrier to LNAPL flow, and water table fluctuation stimulated the downward movement of retained LNAPL. The LNAPL flow and distribution observed in these numerical experiments show that in the subsurface environment, the behaviors of LNAPL highly depend on heterogeneities of unsaturated zone and the dynamic hydrogeologic condition such as water table fluctuation. These results can explain some of the complexity of LNAPL flow and distribution Patterns in LNAPL contaminated field sites.

• Journal for History of Mathematics
• /
• v.17 no.2
• /
• pp.15-20
• /
• 2004

We investigate the unbiasedness and consistency as the statistical properties of density estimators. We show histogram, kernel density estimation, and local adaptive smoothing as density smoothing in this paper. Also, the early and recent research on nonparametric density estimation is described and discussed.

• Composites Research
• /
• v.18 no.6
• /
• pp.34-39
• /
• 2005

In this study, we analyzed the relation between physical/mechanical properties and ballistic properties for several engineering ceramics that were expected to use as armor material. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles. Increasing Young's modulus/density, hardness/density and flexural strength/density ratios, ballistic properties were generally increased. Especially it appeared that the ballistic property about KE projectile was lineally increased, as HEL/density ratio increased.

• The Korean Journal of Applied Statistics
• /
• v.26 no.1
• /
• pp.141-149
• /
• 2013

We present methods for studying the log-density ratio that enables the selection of the predictors and the form to be included in the logistic regression model. Under bivariate normal distributional assumptions, we investigate the form of the log-density ratio as a function of two predictors. If two covariance matrices are equal, then the crossproduct and quadratic terms are not needed. If the variables are uncorrelated, we do not need the crossproduct terms, but we still need the linear and quadratic terms. We also explore other conditions in which the crossproduct and quadratic terms are not needed in the logistic regression model.

• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2024

Proton therapy is known for its superior treatment method due to Bragg peak. To enhance the therapeutic effects of protons, research has been conducted on distributing gold nanoparticles within tumors to increase the absorbed dose. While previous studies focused on handling gold nanoparticles at micrometer and nonometer scale, this study proposes a method to computationally estimate the effect of gold nanoparticles at the millimeter scale. The Geant4 toolkit was applied to computational modeling. Assuming a uniform distribution of water, similar to the human body, and gold nanoparticles, the concentration of gold nanoparticles was adjusted using density ratios. When the density ratio was 5%, the gain in absorbed energy due to gold nanoparticles was nearly twice that of the pure water phantom at the Bragg peak. As the density ratio increased, the gain in absorbed energy linearly increased. When gold nanoparticles were distributed in only one voxel at the Bragg peak, the energy of the protons affected only the neighboring voxels. However, in cases where gold nanoparticles were distributed over a wide area, the volume showing 95% of the maximum absorbed energy (9.46 keV) for the pure water phantom (9.95 keV) exhibited an improvement in absorbed energy over a region 16 times larger, and this region increased as the density ratio increased. Further research is needed to quantify the relationship between the density ratio of gold nanoparticles and the relative biological effect (RBE) in the millimeter scale.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.517-517
• /
• 2012

높은 전력 효율과 간단한 매칭 네트워크의 구조 등 많은 장점을 갖고 있는 직경 560 mm 페라이트 챔버가 대면적 웨이퍼에 대응하기 위해 개발 되었다. 플라즈마 소스원이 챔버 외곽에 위치해 있는 구조적 특성으로 인하여 아르곤 가스 방전 시 플라즈마 밀도 분포는 챔버 중앙부가 낮게 나타나는 볼록한 모양으로 형성 되는데 헬륨 가스를 적절히 혼합할 시에 밀도 분포가 변화가 관찰된다. 헬륨 가스 혼합 비에 따라 플라즈마 밀도 분포는 균일도가 매우 높아 질 수 있으며 60% 이상의 혼합비에서는 중앙 부분의 밀도가 최대치로 역전되는 오목한 밀도 분포가 나타나기도 한다. 이는 헬륨 가스의 대표적인 특징인 가벼운 질량과 높은 이온화 에너지 등에 기인하는데 이러한 특징을 갖는 헬륨 가스를 주입하게 되면 전자의 energy relaxation length가 늘어나게 되며 ambipolar diffusion 계수가 증가하게 된다. 랑뮈어 프로브를 이용하여 측정된 플라즈마 밀도 분포 변화는 앞서 계산 된 energy relaxation length 및 ambipolar diffusion 계수들의 변화로 설명된다.

• Communications for Statistical Applications and Methods
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2012

We present methods to study the log-density ratio of the conditional densities of the predictors given the response variable in the logistic regression model. This allows us to select which predictors are needed and how they should be included in the model. If the conditional distributions are skewed, the distributions can be considered as gamma distributions. A simulation study shows that the linear and log terms are required in general. If the conditional distributions of xjy for the two groups overlap significantly, we need both the linear and log terms; however, only the linear or log term is needed in the model if they are well separated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.20-29
• /
• 2014

Density is applied both three major macroscopic traffic variables (traffic volume, speed, and density) and two measures of effectiveness (MOE) for level of service (LOS) on highway (density and V/C). Especially, it is known for the most accurate MOE on evaluating the LOS of highway. Despite such importance, there is a lack of study on density relatively than other variables for its difficulty of measurement. Existing density estimation methods have some limitations such as density values of same traffic flow vary with collecting time. In this study, we researched actual density measuring method with panoramic image, after each CCTV images in the Sapaesan Tunnel on Seoul Ring Expressway are matched into one panoramic image. Analysis through the Central Limit Theorem shows that density of 24 1 km-images, which means 24 second, applies traffic situation well. That is to say that reasonable density value regardless of collecting time, and practical density which represents actual traffic flow can be taken in case of measuring density by suggested collecting cycle.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.833-839
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene was investigated by small angle light scattering and comparison was made with Ziegler-Natta linear low density polyethylene. The special efforts were made to find out the effects of branching number, length of branching and co-monomer content of m-LLDPE on the crystallization behavior of m-LLDPE. It was found that m-LLDPE has longer induction time to start crystallization from the amorphous state than that of conventional LLDPE with similar branching number, but the rate of crystallization seems not change much in both LLDPEs. Lowering of branching number in m-LLDPE resulted in both increasing of rate of crystallization and reducing induction time to crystallize. In general, the maximum size of spherulites of m-LLDPE is bigger than that of conventional LLDPE.