• Journal of KIISE:Databases
• /
• v.29 no.4
• /
• pp.262-273
• /
• 2002

MOLAP is a technology that accelerates multidimensional data analysis by storing data in a multidimensional array and accessing them using their position information. Depending on a mapping scheme of a multidimensional array onto disk, the sliced of MOLAP operations such as slice and dice varies significantly. [1] proposed a MOLAP cube storage scheme that divides a cube into small chunks with equal side length, compresses sparse chunks, and stores the chunks in row-major order of their chunk indexes. This type of cube storage scheme gives a fair chance to all dimensions of the input data. Here, we developed a variant of their cube storage scheme by placing chunks in a different order. Our scheme accelerates slice and dice operations by aligning chunks to physical disk block boundaries and clustering neighboring chunks. Z-indexing is used for chunk clustering. The efficiency of the proposed scheme is evaluated through experiments. We showed that the proposed scheme is efficient for 3~5 dimensional cubes that are frequently used to analyze business data.

• Korean Journal of Remote Sensing
• /
• v.21 no.2
• /
• pp.99-111
• /
• 2005

A fuzzy logic based data integration was applied for geothermal potential mapping in Jeju Island. Several data sets, such as geological map, the density of drainage system, the distribution density of cinder cones, density of lineaments, aerial survey map for total magnetic intensity and total gamma ray, were collected as thematic map for the integration. Fuzzy membership function for all thematic maps were compared to the locations of the spa, which were used as ground-truth control points. The older geology, the lower density of drainage, cinder cones and lineaments, and the lower intensity of magnetic and gamma ray were showed the higher fuzzy membership function values, respectively. After integrating all thematic maps, the results of gamma operator with the gamma value of 0.75 was the highest success rate, and new geothermal potential zone is prospected in western north part of Jeju Island.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.465-469
• /
• 2019

In this paper, the design of BLDC (brushless direct current) motors based on torque and back-EMF equations was carried out to assess the application of the motor in concrete vibrators. The air gap flux density of the motor is an important parameter because the length of the motor and the size of the diameter are given. The air gap magnetic flux density was calculated through a simplified magnetic circuit, and basic design of the shape and dimensions of the motor were then determined by carrying out experiments based on torque, back-EMF, and air magnetic flux density equations. After setting the outer and inner diameters, stack lengths, and rated speed of the motor, a detailed design was performed by simulations using the finite element method by designating the diameter and thickness of the motor as the key parameters. The final design to satisfy the target torque and the lowest THD (Total Harmonic Distortion) was carried out along with a simulation.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.533-540
• /
• 2021

Gravity field analysis and density modeling were performed to evaluate the internal state of the rock mass, which is the cause of cut slope collapse. The shape of the weathered zone and the depth of basement could be confirmed from the complete Bouguer anomaly and density model. The basement depth at the center of the cut slope calculated using the Euler deconvolution inverse method is 30 m, which is about 10 m deeper than the surrounding area. In addition, the depth of basement and the thickness of the weathered zone are similar to the boundary between low resistivity and high resistivity in dipole-dipole survey. From the study results, gravity field analysis and density modeling recognizes the internal state of the rock slope and can be used for slope safety analysis, and is particularly suitable as a method to determine the shape of weathered zones in interpreting the safety of cut slopes

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.238-238
• /
• 2022

합천댐의 건설 이후, 댐직하류 구간에서는 10년 동안의 방류량 감소와 기후변화로 인한 강우패턴의 변화로 하도식생의 활착이 발생하여 식생이 증식하고 밀도가 점차 증가하고 있다. 식생밀도의 증가는 흐름에 대한 항력을 증가시켜 유속을 감소시키고 수심을 증가시킨다. 이는 통수능 저하를 초래하며, 홍수 시 수위증가에 따른 홍수범람의 위험성 증가시킨다. 따라서 식생영향에 대한 심화적인 이해를 제고하여 적절한 식생관리대책을 구축할 필요가 있다. 본 연구에서는 이러한 필요성에 맞추어 식생대 영향에 따른 흐름의 변화를 예측모의하여 흐름과 식생대의 상호작용에 대한 분석을 수행하였다. 이를 위해 2차원 흐름모형인 Nays2D를 이용하여 합천댐 직하류 구간을 대상으로 식생밀도의 변화에 따른 흐름의 변화를 부등류를 기반으로 모의하였다. 상류단의 경계조건은 162.99 m³/s(실운영 방류량), 995 m³/s(2년빈도 댐 조절 방류량), 2670 m³/s(100년빈도 댐 조절 방류량)로 3개의 유량으로 구분하여 모의하였다. 식생의 특성은 현장조사를 통해 밀도를 산정하여 수치모의에 적용하였다. 식생밀도는 4가지로 구분하여 모의시나리오를 구축하였으며 현장조사를 통해 산정된 2021년도 식생밀도를 기준으로 식생밀도를 증감하여 수치모의를 수행하였다. 수치모의 조건은 2021년 식생현황, 식생개선, 식생존치, 전벌채로서 식생개선의 경우, 2021년 식생밀도의 0.5배로, 식생존치의 경우, 식생밀도를 2배로 적용하였다. 전벌채는 식생이 없는 것으로 가정하였다. 수치모의 결과, 식생개선이 2021년 식생현황과 식생존치보다 상대적으로 수심이 낮게 나타났다. 식생을 전벌채한 경우, 식생이 존재하는 조건보다 수심이 낮고 유속이 빠르게 나타났으며 특히, 만곡부의 외측에서는 2차류의 발달로 흐름이 집중되었다. 이를 통해 식생개선의 경우, 식생현황과 식생존치보다 홍수범람의 가능성이 적을 것으로 판단되며 전벌채의 경우, 만곡부 외측에서 2차류 발달에 의한 세굴을 야기하여 제방의 안정성에 영향을 줄 것으로 예측된다. 본 연구는 댐 직하류에 식생대 밀도변화가 흐름변화에 미치는 영향을 분석한 수치모의 사례로서 이는 추후 식생을 고려하는 하천관리방안을 수립 시, 식생관리방법에 대한 근거자료로 활용될 수 있을 것으로 기대된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.3-9
• /
• 2010

Drainage density, defined as the degree to which a landscape is dissected by streams, is a fundamental property of natural terrain that reflect the comprehensive morphologic response of watershed. In this study the spatial variability of drainage density is analyzed by statistical approach to it and its plotting method is proposed. Overland flow length is confirmed to be a highly variable spatial factor from the result of statistical analysis. Distribution map of drainage density based on spatial autocorrelation length in this study would be a superior tool to the classical definition of drainage density.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.111-117
• /
• 2007

This paper presents a novel approach to speech enhancement based on a complex Laplacian probability density function (pdf). With a use of goodness-of-fit (GOF) test we show that the complex Laplacian pdf is more suitable to describe the conventional Gaussian pdf. The likelihood ratio (LR) is applied to derive the speech absence probability in the speech enhancement algorithm. The performance of the proposed algorithm is evaluated by the objective test and yields better results compared with the conventional Gaussian pdf-based scheme.

• Composites Research
• /
• v.37 no.3
• /
• pp.179-185
• /
• 2024

This study quantitatively evaluated and investigated the changes in transverse tensile strength of unidirectional fiber-reinforced composites with initial void defects using a Representative Volume Element (RVE) model. After calculating the appropriate sample size based on margin of error and confidence level for initial void defects, a sample group of 5000 RVE models with initial void defects was generated. Dimensional reduction and density-based clustering analysis were conducted on the sample group to assess similarity, confirming and verifying that the sample group was unbiased. The validated sample analysis results were represented using a Weibull distribution, allowing them to be applied to the reliability analysis of composite structures.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2009

A video segmentation algorithm, which can extract objects even with non-stationary backgrounds, is proposed in this work. The proposed algorithm is composed of three steps. First, we perform an initial segmentation interactively to build the probability density functions of colors per each macro block via kernel density estimation. Then, for each subsequent frame, we construct a coherence strip, which is likely to contain the object contour, by exploiting spatio-temporal correlations. Finally, we perform the segmentation by minimizing an energy function composed of color, coherence, and smoothness terms. Experimental results on various test sequences show that the proposed algorithm provides accurate segmentation results.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.181-186
• /
• 2005

Gravity method produces subsurface density distribution, which is direct information of soundness of basement. Therefore, microgravity is one of the most effective method for detections of limestone cavities, abandoned mine-shafts and other tunnels, The paper show the effectiveness of microgravity by three different field cases.