• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.364-373
• /
• 2015

This study was carried out to estimate the effects of density and mixing ratio of mandarin peels on the bending performances of the sawdust-mandarin peels particle boards. The board density influenced significantly to the bending performance of boards. Dynamic modulus of elasticity (dMOE) and static modulus of elasticity (sMOE) and modulus of rupture (MOR) of particle boards decreased with an increase in the mixing ratio of mandarin peels at the board densities of $0.4g/cm^3$ and $0.5g/cm^3$. High correlations were found between the dMOE and sMOE, and dMOE and MOR of particle boards prepared. Therefore, it was concluded that the dMOE obtained by free vibration test using resonance frequency could be used for predicting the sMOE and MOR of sawdust-mandarin peels particle boards.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.315-327
• /
• 2021

Purpose of this study is reviewing the use method for the sawdust (sawmilling by-product) and rice husk (Agriculture by-product) by adding charcoal, an eco-friendly material. Mixed composite boards were manufactured with those materials with each density and mixing ratio, and bending performance was investigated. When the addition ratio of sawdust, rice husk and charcoal is 50:20:20 and the resin addition ratio is 10%, as the density of the prepared mixed board ranges from 0.5 g/cm³ to 0.7 g/cm³, the bending strength was 0.42~3.24 N/mm², dynamic modulus of elasticity was 94.5~888.4 N/mm², and the static modulus of elasticity was in the range of 31.4~220.7 N/mm². As the density increased, the bending performance increased, indicating that the density had a significant effect on the bending performance. In a board prepared by setting the density of 0.6 g/cm³, the addition ratio of sawdust to 50%, and the addition ratio of rice husk and charcoal at different ratios, the bending performance showed a tendency to decrease as the addition ratio of charcoal increased. The relationship between the addition ratio of rice husk and charcoal, bending strength, resonance frequency, and dynamic and static bending modulus showed a rather low correlation with the values of the coefficient of determination (R²) of 0.4562, 0.4310, 0.4589, and 0.5847, respectively. Thus, we found that the effect of the addition ratio on the bending performance was small.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.223-228
• /
• 2010

High-frequency bottom loss measurements for grazing angle of $82^{\circ}$ in frequency range 17-40 kHz were made in Jinhae bay in the southern part of Korea. Observations of bottom loss showed the strong variation as a function of frequency, which were compared to the predicted values using two-layered sediment reflection model. The geoacoustic parameters including sound speed, density and attenuation coefficient for the second sediment layer were predicted from the empirical relations with the mean grain size obtained from sediment core analysis. The geoacoustic parameters for the surficial sediment layer were inverted using Monte Carlo inversion algorithm. A sensitivity study for the geoacoustic parameters showed that the thickness of surficial sediment layer was most sensitive to the variation of the bottom loss.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.469-474
• /
• 2005

Tn this study, the noll-destructive computed X-ray tomography was adopted to observe the density distribution of the needle-punched C-C composites nozzle throat. The density distribution of the C-C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of the C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.06a
• /
• pp.1101-1104
• /
• 1998

• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.121-122
• /
• 2000

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.10-16
• /
• 1995

The E-polarized scattering problems by a perfect conductor strip grating are analyzed by the method of moments. For an E-polarization the induced surface current density is expected to blow up at the strip both edges. Then the induced surface current density on the strip is expanded in a series of multiplication of Ultraspherical ploynomials with zeroth order and functions with appropriate edge boundary condition. The numerical results for current density and reflection cofficient are compared with other functions, it is shown that numerical results better improves the convergence of the moment method soulutions with general incident angles than the existing several other functions. The sharp variation points in the magnitude of geometric-optical reflection coefficient can be moved by varying the incident angle, strip width, and strip spacing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.98-98
• /
• 2019

중력류 또는 밀도류는 주변 유체에 비해 상대적으로 밀도가 큰 유체가 밀도차에 의한 추진력으로 흐르는 것이다. 중력류의 수치모델링에는 두 가지 어려움이 있다. 즉, 적합한 지배방정식을 구성하여 적용하는 것 그리고 난류의 영향을 합리적으로 반영하는 것이다. 기존 중력류 해석을 위한 지배방정식들은 유체의 연속방정식과 운동량 방정식 그리고 밀도 또는 농도의 이송방정식을 조합하여 구성된다. 이들 지배방정식을 이용한 연구들은 대부분 두 유체 사이의 밀도차가 충분히 작아서 밀도 변동(variations)의 영향은 오로지 부력항에서만 유지된다는 Boussinesq 근사에 근거를 둔다. 그리고 이송방정식에서 밀도 또는 농도의 확산계수을 점성계수의 함수로 표현하기 위해서 Schmidt 수를 이용한다. 수치모델링에서 Schimdt 수는 상수값을 적용하지만, 이 값은 밀도의 연직방향 경사에 근거한 부력빈도(buoyancy frequency)와 난류량의 따라 큰 차이를 보이는 것으로 알려져있다. 한편, 표준 통계학적 난류모델과 벽함수를 적용한 수치모델링은 초기 중력에 의해서 무너지는(slumping) 단계를 넘어 관성력으로 추진되는 단계와 점성 효과가 지배적인 단계에서는 정확도에 현저히 낮아지기 때문에 대부분 큰와모의(large-eddy simulation, LES) 또는 DNS(direct numerical simulation)수준의 고해상도(high-resolution) 해석기법을 적용하여 공학적인 문제에 적용하는 데는 한계가 있다. 이 연구에서는 Boussinesq 근사와 Schmidt 수를 사용하지 않으며, LES 보다 적용이 용이한 DES (detached-eddy simulation)기법을 조합한 다상흐름 수치모델을 적용하여 중력류를 해석을 시도하였다. 수치해석결과를 실험값과 함께 기존 수치모델링 기법으로 구한 수치해와 비교분석하여 이 연구에서 개발 및 적용된 수치모델링 기법의 적용성을 평가한다.

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.05a
• /
• pp.127-130
• /
• 2003

주변분포가 Laplace 분포인 세 가지 형태의 이변량 Laplace 분포를 연구한다. 각각의 이변량 Laplace 분포의 확률밀도함수와 누적분포함수를 유도하고, 분포의 그래프를 그려봄으로써 분포의 형태를 알아본다. 조건부 적률을 정리하여 조건부 첨도와 조건부 왜도를 구하고 분포의 성질을 파악한다. 상관계수를 구하여 다른 이변량 분포의 상관계수와 비교해 보았다. 그리고 정의된 분포함수를 응용하여 이변량 Laplace 분포를 따르는 난수벡터를 발생하는 알고리즘을 제안하였으며, 생성된 난수벡터의 표본으로부터 구한 표본평균과 중앙값의 분산-공분산 행렬식을 구하고 이변량 정규분포에 대응하는 행렬식과 비교 토론하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.