• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.39-47
• /
• 2003

UEGI (Unburned Exhaust Gas Ignition) is an alternative method for fast light-off of a catalyst. It ignites the unburned exhaust mixture using two glow plugs installed in the upstream of the close-coupled catalysts. In addition, a hydrocarbon adsorber was applied to the UEGI, for more effective reduction of HC emission. Engine bench tests show that the CCC reaches the light-off temperature laster than the baseline exhaust system and HC and CO emissions are reduced significantly during the cold start. From the vehicle test, it was observed that a few amount of HC emission was reduced even the catalysts were aged. It is expected to develop a solution kit applicable to a new vehicle or used one, to meet the emission regulation

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.335-340
• /
• 2000

Most vehicle's exhaust emissions come from the cold transient period of the FTP-75 test. In this study, UEGI technology was developed to help close-coupled catalytic converter (CCC) reach light-off temperature within a few seconds after cold-start. In the UEGI system, unburned exhaust mixture is ignited by four glow plugs installed upstream of the catalyst. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches light-off temperature earlier. Under the conditions tested, the light-off time of the baseline case was 62 seconds and that of the UEGI case was 33 seconds.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.150-155
• /
• 2000

Exhaust emissions from vehicles are the main source of air pollution. Many researchers are trying to find the way of reducing vehicle emissions, especially in the cold transient period of the FTP-75 test. In this study, UEGI (Unburned Exhaust Gas Ignition) technology, warming up the close-coupled catalytic converter (CCC) by igniting the unburned exhaust mixture using two glow plugs installed in the upstream of the catalyst, was developed. It was applied to an exhaust system with a hydrocarbon adsorber to ensure an effective reduction of HC emission during the cold start period. Results showed that the CCC reaches the light-off temperature (LOT) in a shorter time compared with the baseline exhaust system, and HC and CO emissions are reduced significantly during the cold start.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.43-49
• /
• 1996

With the recent interest in methanol as a SI engine fuel, aldehyde emissions have become a greater concern. A M-90 fueled passenger car was operated in a chassis dynamometer using FTP 75 driving cycle to examine formaldehyde emissions. Formation process of aldehyde and methods to reduce them are discussed in this paper for a SI-engine passenger car operating by M-90. Aldehyde emissions have been found to be 3 to 7 times higher from M-90 than from gasoline, while CO, NOx, THC are as low or lower than gasoline. Noble metal compositions appeared to play a role in formaldehyde and unburned methanol emission performance. For example, catalyst Pd showed better reduction of both formaldehyde and methanol than catalyst Pt. however, emission rates of formaldehyde and methanol for catalyst Pt were relatively similar to catalyst Pt/Rh.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.1-10
• /
• 2023

산업혁명의 발달로 인해 급격하게 증가된 온실가스 배출량을 저감하기 위해 배기 배출물 규제가 계속해서 강화되고 있다. 이를 만족시키기 위해선 친환경 연료의 사용은 필수적이다. 미래의 친환경 연료로서 수소가 주목받고 있지만, 물질적 특성으로 인해 취급과 보관에 큰 어려움을 겪고 있어, 이에 대안으로 암모니아가 제안되었다. 암모니아는 수소 대비 상온 조건에서 쉽게 액화가 가능하며, 에너지밀도가 높다. 이에 엔진의 연료로서 암모니아의 적용성을 검토하기 위해 직접분사식 암모니아 전소 엔진에서 연소제어인자의 변경에 따른 실험을 진행하였다. 본 실험은 점화시기(Spark Timing)와 공기과잉률(Excess Air Ratio) 두 개의 변수를 변경하여 실험을 진행하였다.엔진 속도 1,500 RPM 및 중부하 이상(제동 토크 200 Nm)의 조건에서 암모니아 전소를 하였을 때, 연소 안정성과 질소산화물, 미연 암모니아 등의 배기 배출물의 경향을 관찰하였다. 연소제어인자의 최적화를 통해 암모니아만을 연료로 사용한 경우에도 안정적인 연소가 가능한 조건을 찾을 수 있었고, 향후 운전영역 확장을 위한 전략을 적용할 계획이다.