• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.110-116
• /
• 2015

In this paper, a compact low-loss reflector-type phase shifter with harmonic suppression using meander T-shaped branch-line coupler is suggested. The compact coupler for the phase shifter has a size of $22.2{\times}14.9mm^2$ while a conventional branch coupler has a size of $32.6{\times}27.8mm^2$. The phase shifter shows insertion losses of 0.19-0.28 dB at the center frequency of 2.1 GHz, and a measured maximum phase shift of $137^{\circ}$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2011

In the paper, MIMO antenna for LTE 13 band, LTE 7 band wireless communication service is proposed. The proposed antenna is designed where on the top of FR-4(${\epsilon}_r=4.4$, thickness=-.8mm). In proposed structure, two Planar Inverted F Antennas (PIFAs) using meander and folded structure are symmetrically designed for the miniaturization. The isolation between two antennas was also improved by using two slits on the ground plane. The isolation values of the fabricated antenna exhibits -18 dB, -13dB at LTE 13 and LTE 7 band, respectively. The average gain and efficiency are - 4.1 dBi, 41% on LTE 13 band, -1 dBi, 81% on LTE 7 band, respectively. Thus the proposed antenna can be applied to the LTE system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

In this paper, an equally spaced $3{\times}2$ microstrip patch array antenna based on the fundamental infinite wavelength supported by the composite right/left-handed (CRLH) transmission line (TL) is proposed. The proposed CRLH TL unit cell consists of an inter-digit capacitor to realize left-handed (LH) series capacitance and non-symmetric shunt meander line with a shorted via to realize LH shunt inductance. At the infinite wavelength frequency of 2.09 GHz a 6-port series power divider consisting of a 19 unit cells shows a maximum magnitude difference of 0.73 dB and a $0.52^{\circ}$ maximum phase difference between output ports. The measured resonant frequency and maximum gain of the fabricated array antenna is 2.09 GHz and 10.98 dBi, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.823-828
• /
• 2009

A small UHF RFID tag antenna for a key-chain installed inside of a metallic key-management cabinet has been designed. The tag antenna has been designed as small size as $66\;mm{\times}6\;mm$ with consideration of coupling among the tag antennas and metallic parts of key-chain and cabinet. The tag antenna is fabricated with a meander line dipole using T-matching method with FR-4 substrate. One tag antenna has been designed with consideration of coupling of adjacent tag antennas, and the other has been designed for the location close to the metallic part in the cabinet. The characteristics of tag antennas and reading distance have been analyzed based on the different numbers of adjacent tag antennas. As a results, the 360 tag antennas installed in the cabinet have been successfully recognized.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.204-210
• /
• 2005

In this paper, we are proposed the antennas for RFID tag operated at UHF band which are inserted ground plane easy to mount the RFTD chips at the antenna surfaces. In order to implemented antenna for RFID tag which the size is same as conventional name card, the structure of the antenna is meander type, matching method for improvement characteristics of the antenna use T matching method, ground plane is inserted at the antenna substrate fer mounting RFID chips. The substrate size of implementation is $100\times60\;mm^2$ and the FR4 substrate is used. Results of the experiment, the center frequency of the implemented antenna is 427 MHz, -10 dB return loss bandwidth is 8 MHz, maximum return loss is 21 dB, the radiation pattern is omnidirectional. From these results, we are conformed application for UHF RFID tag antenna.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.203-208
• /
• 2014

In this paper, the antenna of a small active RFID for 433MHz is proposed, and the proposed antenna is a kind of built-in antenna, which uses IFA structure. The performance was improved by the change of the spacing between the feed point and short strip, inserting the meander line structure in a radiator, and varying the gap between the radiator and the ground plane in the proposed antenna. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. The frequency band of 433MHz Active RFID is from 433.67 to 434.17 MHz. There is a value of return loss less than -9.54 dB in 433MHz band of the active RFID, and the maximum antenna gain is -4.28dBi. The Jig size of the proposed antenna is $72{\times}44{\times}1mm$, and the size of the antenna area is $35.5{\times}19.5mm$. The result proved the possibility of the practical use on miniaturized 433MHz antenna using IFA structure that came from comparing and analyzing the measured and simulated data of the antenna.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2012

In this paper, Coplanar waveguide(CPW)-fed slot loop antenna, which is applicable to the dual band(2.4GHz~2.4835GHz, 5.15GHz~5.825GHz) for the wireless LAN, is proposed. In order to miniaturize the proposed antenna, slot loop is bent by meandering. The resonant frequencies in the required dual band are adjusted by variation of the resonant length of slot loop as well as slot width. In particular, use of capacitive coupling CPW feed provides impedance matching without a seperate matching circuit, because the amount of electromagnetic coupling can be controlled by the offset between feed and radiator. As a result, it has been observed that the proposed antenna satisfies not only the required return loss(${\leq}10dB$) but also has high efficiency(${\geq}80%$) over the whole frequency band. In order to check the validity of the proposed antenna, some simulated results for return loss and radiation pattern are presented in comparison with the measured results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.288-297
• /
• 2007

The novel internal monopole chip antenna of penta-band operation for GSM850/GSM900/DCS/USPCS/WCDMA bands for mobile phones is proposed. This antenna occupies a small volume $8\times3.2\times20mm^3$ and is suitable to be embedded in a mobile phone as an internal antenna. The minimization of the proposed antenna was realized by using spiral line structure and meander line structure on FR-4 of dielectric$(\varepsilon_r=4.4)$. The designed antenna has the wide-band operation in the upper band by overlapping high order resonances. The measured bandwidth of this antenna (VSWR>3) is 150MHz$(1,030\sim1,180\;MHz)$ in the lower band operation and 650 MHz$(1,760\sim2,410\;MHz)$ in higher band operation. The measured radiation efficiency within bandwidth(VSWR 3:1) is over 50 %. The antenna has been designed by a commercial software HFSS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2015

In this paper, a new kind of wideband, low-loss composite right/left-handed (CRLH) transmission line (TL) and a Wilkinson power divider are presented. The TL is composed of a parallel meander inductor and a series cutting capacitor based on coplanar waveguide (CPW) structure. The power divider is designed by substituting the CRLH-TL into the conventional transmission line. The experiment results show that the TL has a good agreement with the desired results, exhibiting the return losses under 12 dB from 8.4 GHz to 34.4 GHz. The operating frequencies of the power divider are 12.05 GHz to 13.15 GHz and 16.50 GHz to 19.30 GHz, respectively. The 20 dB bandwidths are 8.9 % and 17.9 %, respectively. Typical experimental measurements are conducted and compared with the simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.563-568
• /
• 2007

In this paper, the proposed package antenna, which is meander line structure with short pin, is miniaturized to realize RF-SoP at 900 MHz RFID band. The RFID BGA(Ball Grid Array) chip is put in a cavity of LTCC Layers. The coupling and cross talk, which are happen between BGA chip and proposed package antenna, are reduced by faraday cage, which consists of ground and via fences, is realized to enhance the isolation between BGA chip and antenna. The proposed antenna structure is focused on the package level antenna realization at low frequency band. The novel proposed package antenna size is $13mm{\times}9mm{\times}3.51mm$. The measured resonance frequency is 0.893 GHz. The impedance bandwidth is 9 MHz. The maximum gain of radiation pattern is -2.36 dBi.