• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.131-134
• /
• 2005

PDP 방전 셀의 최적화 및 진공자외선 발광효율을 향상시키기 위한 목적으로 AC - PDP 미소방전에서 제논 여기종 원자의 밀도를 측정하는 레이저 흡수법을 개발하였다. 본 연구에서는 PDP 셀의 기체 압력을 350Torr, 제논 함량 10%로 고정하고, 전극 위에서의 여러 위치에서 준안정 준위 제논의 밀도를 흡수법으로 측정하였다. 실험 결과 제논 여기종의 밀도의 최대값은 전극의 위치(가장자리에서 안쪽으로의 거리)가 $50{\mu}m$, $120{\mu},\;150{\mu}m$ 일 때 $3.5{\times}10^{12}cm^{-3}$, $2.8{\times}10^{12}cm^{-3}$, $2.2{\times}10^{12}cm^{-3}$로 나타났다.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1252-1262
• /
• 1999

The effect of microstructures on the strength-flangeability of Nb bearing hot-rolled high strength steel was investigated in order to improve the strength-flangeability of conventional TS 580MPa grades HSLA steel for the automotive wheel disc. The low temperature coiling method using 3-step controlled cooling pattern after hot rolling was effective to produce the Nb-bearing high strength steel with the polygonal ferrite and bainite duplex microstructures. It was suggested that the suppressed precipitation of grain boundary cementites and the decreased hardness difference between ferrite matrix and bainite cause the excellent stretch-flangeability of ferrite-bainite duplex microstructure steel. Therefore, the formation and propagation of microcracks were suppressed relative to the conventional HSLA steel with ferrite and pearlite microstructure. In addition, the elongation was improved as compared with that of hot-rolled steel sheets using conventional early cooling pattern because the volume fraction of polygonal ferrite was increased.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.129-136
• /
• 2006

Engineered mixtures, which consist of rigid sand particles and soft fine-grained rubber particles, are tested to characterize their small and large-strain responses. Engineered soils are prepared with different volumetric sand fraction, sf, to identify the transition from a rigid to a soft granular skeleton using wave propagation, $K_{o}-loading$, and triaxial testing. Deformation moduli at small, middle and large-strain do not change linearly with the volume fraction of rigid particles; instead, deformation moduli increase dramatically when the sand fraction exceeds a threshold value between sf=0.6 to 0.8 that marks the formation of a percolating network of stiff particles. The friction angle increases with the volume fraction of rigid particles. Conversely, the axial strain at peak strength increases with the content of soft particles, and no apparent peak strength is observed in specimens when sand fraction is less than 60%. The presence of soft particles alters the formation of force chains. While soft particles are not part of high-load carrying chains, they play the important role of preventing the buckling of stiff particle chains.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.103-111
• /
• 2008

Soils naturally contain grains of different minerals which may be dissolved under chemical or physical processes. The dissolution leads changes in microstructure of particulate media, such as an increase in local void or permeability, which affects the strength and deformation of soils. This study focuses on the small strain stiffness characteristics of vanishing mixtures, which consist of sand and salt particles at different volume fractions. Experiments are carried out in a conventional oedometer cell (Ko-loading) integrated with bender elements for the measurement of shear waves. Dissolutions of particles are implemented by saturating the mixtures at various confining stresses. Axial deformation and shear waves are recorded after each loading stage and during dissolution process. Experimental results show that after dissolution, the vertical strain and the void ratio increase, while the shear wave velocity and small strain shear modulus decrease. The decrease of the velocity results from the void ratio increase and particle contact decrease. The process monitoring during dissolution of the particles shows that the vertical strain dramatically increases at the beginning of the saturation process and converges after vanishing process finishes, and that the shear wave velocity decreases at the beginning and increases due to the particle reorientation. Specimens prepared by sand and salt particles are proved to be able to provide a valuable insight in macro structural behaviors of the vanishings mixtures.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.334-344
• /
• 2020

A total of 24 families, 44 species, and 658 benthic macroinvertebrates were identified, and Ecdyonurus dracon Kluge (13%) was the dominant species in forested streams within the Yeonyeopsan (Mt.). A total of four habit categories (i.e., clingers (56%), burrowers (19%), swimmers (14%), and sprawlers (56%)) were identified, and clingers were the dominant habit at all survey points except point one (UP1). Habitat characteristics were depended on the hydraulic factors (e.g., flow velocity, depth, and substrates), water quality (e.g., DO and water temperature), and the habitat characteristics were differed in the riffle, which has a faster the flow velocity, compared by in the stagnant pool. In other words, in riffles, the clingers dominated in high flow velocity with the large maximum and median grain size for substrates in the habitats regardless of depth, but the burrowers and sprawlers were dominant in low flow velocity with the small maximum and median grain size for substrates in the habitats. Moreover, DO and flow velocity were in positive correlation (y = 0.6666x - 0.659, R² = 0.0851), and the habitat for burrowers was wider than that for sprawlers or clingers. The water depth was negatively correlated with water temperature (y = -26.397x + 283.87, R² = 0.1802) since the water temperature is more sensitive to insolation in shallow depth. pH was positively correlated with water temperature. The investigation of the habitat characteristics by separating the relations between pH and DO in upstream and downstream showed the low pH and high DO in the upstream with a high crown density of 68%, regardless of community composition. On the other hand, high pH and low DO in the downstream with a relatively low crown density of 51%. It was considered that the riparian forest played a role in suppressing the growth of attached algae and the controlling water temperature in headwater streams. Our findings identified the habitat characteristics of benthic macroinvertebrates in a headwater stream. We expected that the finding can provide reference data for suggesting conservation and management plans in a headwater stream and increasing academic value.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.185-191
• /
• 2017

The objective of this paper is to investigate the effect of waste refractory powder(WRP) and desulfurization gypsum(FGD) as activators on the flow properties and the strength development of high volume blast furnace slag mortar incorporating illite(BSM) having adsorption and deodorization. To fabricate the BSMs with 60% of W/B, blast furnace slag are incorporated with 45% and 65%, respectively. WRP and FGD are substituted from 5 to 10%. Test results indicate that the flow is decreased with increase of WRP and FGD, while increase of WRP and FGD enhance the compressive strength due to accelerated reaction of blast furnace slag, The use of illite results in a decrease of compressive strength. pH has increasing tendency until 7days, while it has reduction. In this paper, optimal dosages of WRP and FGD are believed to be around 5% each.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.85-90
• /
• 2010

Friction welding is a common practice to join axially symmetrical parts for automobile industry applications. The shaft for automobile reverse idle gear is generally produced by forging steel, SF 45. This method is not so good because of high cost of material and production. In this study, in order to investigate the possibility of application of SM 45C to SF 45 dissimilar friction welding, the dissimilar friction welded joints were performed using 20 mm diameter solid bar in forging steel(SF 45) to carbon steel(SM 45C). The optimal friction welding parameters were selected to ensure reliable quality welds on the basis of visual examination, tensile test, micro-Virkers hardness surveys of the bond of area and optical microstructure investigations for welded joint parts. Finally, post weld heat treatment(PWHT) of the high-frequency induction hardening was performed for the friction welded specimens under the optimal welding conditions. And then, the mechanical properties were compared for as-welded and PWHT in SM 45C to SF 45.

• Journal of Korea Water Resources Association
• /
• v.41 no.11
• /
• pp.1135-1142
• /
• 2008

Collapse of the levee surrounding structure(culvert) accounts for l0 % of collapse factors of the river levees. In particular, in 2002, the levee collapse that happened at "Nakdong River" at flood usually happened around culverts. This levee collapse has mechanism that the cavity expands with internal erosion at flood after the pore and cavity are formed between culvert and levee copula which are heterogeneity material. The study regarding the cavity or flowing detection around a culvert for safety management of a river levee is in the proceeding. In this study, the characteristic of two sensors could be figured out through an experiment about displacement measure of Flex sensor and FBG sensor and the decision of more suitable sensor was possible for safety supervision of river levee. According to an experiment result, several characteristics of FBG sensor could be known in consistency of the measure data and minute displacement measure part regarding displacement measure and this characteristic may supplement a shortcoming of Flex sensor at this time.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.115-121
• /
• 2004

In a series of feeding experiments using the newly established the first laboratory strain of a temperate photosynthetic ciliate, Mesodinium rubrum MR-MAL01, direct evidence was obtained for ingestion of the cultured M. rubrum cells by the bivalves like the Korean scallop, Chlamys farreri and Manila clam. Ruditapes phil-ippinarum. Each experimental Korean scallop and Manila clam removed up to 9,590 and 23,200 cells min-1, respectively. Small particles almost identical to the ruptured cells of MR-MAL01 culture were observed in the gut of the experimental bivalves, although no intact M. rubrum cell was found. In a 28 days rearing experiment, Isoshrysis galbana (KMCC H-2), a microalga, supported better growth of small Manila clam spat (0.46 mm in shell length) than MR-MAL01 strain. For the large Manila clam spat (0.84 mm in shell length), however. MR-MAL01 strain was a better prey item. Mass culture methods for this photosynthetic marine ciliate may be developed for use as live feed in aquaculture of the spat and broodstock of bivalve and small-mouthed fish larvae.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.148-148
• /
• 1999

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic Boron Nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 자료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 이러한 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 증착직후 급격한 박리현상을 보이는 c-BN 박막의 밀착력문제때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용하여 c-BN 박막을 합성하고, 합성된 c-BN 박막의 밀착력에 미치는 공정인자의 영향을 규명하여, 급격한 박리현상을 보이는 c-BN 박막의 밀착력 향상을 위한 최적 공정을 도출하고자 하였다. BN 박막 합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(activated reactive evaporation)에 의해 이루어졌다. 기존의 ARE장치와 달리 열음극(hot cathode)과 양극(anode)사이에 평행자기장을 부여하여 플라즈마를 증대시켜 반응효율을 높혔다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40 mm크기로 절단 후, 100%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한후 사용하였다. c-BN 박막을 얻기 위한 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N가스유량비이었다. 증착공정 인자들을 변화시켜 다양한 조건에서 c-BN 박막의 합성하여 밀착력 변화를 조사하였다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, Bn 박막의 상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 증착된 c-BN 박막은 3~10 GPa의 큰 잔류응력으로 인해 증착직후 급격한 박리현상을 보였다. 이의 개선을 위해 증착중 기판바이어스 제어 및 후열처리를 통해 밀착력을 수~수백배 향상시킬 수 있었다. c-BN 박막의 합성을 위해서는 증착중인 박막표면으로 큰 에너지를 갖는 이온의 충돌이 필요하기 때문에 기판 바이어스가 요구되는데, c-BN의 합성단계를 핵생성 단계와 성장 단계로 구분하여 인가한 기판바이어스를 달리하였다. 이 결과 그림 1에서 나타낸 것처럼 c-BN 박막의 핵생성에 필요한 기판바이어스의 50% 정도만을 인가하였을 때 잔류응력은 크게 경감되었으며, 밀착력이 크게 향상되었다.