• Title/Summary/Keyword: 미세 구조물

Search Result 960, Processing Time 0.028 seconds

Bio-mediated Flocculation by Extracellular Polymeric Substances in Cohesive Sediment Suspensions: Experimental Study (생체고분자물질이 부유사 응집에 미치는 영향 연구)

  • Baek, Seung-Ryong;Kim, Jae-In;O, Min-Ji;Lee, Byeong-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.107-107
    • /
    • 2015
  • 최근 기후변화로 인한 강우강도 증대, 산업화에 따른 토지개발 등으로 인하여 다량의 점착성 부유사(Cohesive Sediments)가 하천, 호소 등 수자원 환경으로 유입되고 있다. 점착성 부유사는 하천, 호소의 난류 조건에 따라 부유하거나 혹은 응집, 침전하여 하상 저니층을 형성한다. 부유사, 미생물 및 각종 유기입자가 포함된 하상 저니층은 검은색으로 외관상 보기 좋지 않을 뿐 아니라, 혐기성상태에서 부패하여 수생태계의 건강성을 해치게 된다. 또한 미세 부유사 및 미생물 입자는 각종 중금속, 유기오염물질을 흡착하고, 조건에 따라 재용출할 수 있는 저장매체로 작용하기 때문에 수자원환경에 미치는 영향이 아주 크다. 특히, 수중 미생물(조류) 작용에 의해 생성되는 EPS (Extracellular Polymeric Substances)는 부유사 및 미생물 입자들을 서로 엉겨 붙게 하여, 부유사-미생물 혼합 응집체 및 저니층 형성을 가속화하게 된다. 본 연구에서는 EPS가 부유사 응집에 미치는 영향을 파악하기 위하여, Xanthan Gum (Sigma-Aldrich, USA)을 EPS의 지표 물질로 사용하고, Kaolinite(Sigma-Aldrich, USA)를 수자원환경에 존재하는 대표적인 부유사로 사용하여 응집실험(Jar Test)을 수행하였다. 이온농도가 응집에 미치는 영향을 파악하기 위하여 수체 이온농도를 0.0001M NaCl, 0.001M NaCl, 0.01M NaCl, 그리고 0.001M NaCl + 0.1mg/L $Ca^{2+}$, 0.001M NaCl + 0.5mg/L $Ca^{2+}$, 0.001M NaCl + 1.0 mg/L $Ca^{2+}$으로 보정하여 응집실험을 수행하였다. 250 rpm 급속 교반 1븐, 50 rpm 완속교반 5시간, 침잔 1시간 후 응집체를 채취하여 응집체 이미지 분석을 통해 응집체 크기 및 형상을 측정하였고, 수표면 2 cm 지점에서 상등액을 채수하여 잔류 고형물 농도 분석을 실시하였다. 응집실험을 통하여 다음과 같은 결과를 도출하였다.. 낮은 이온농도의 경우, EPS가 큰 고분자 구조체에 부유 입자들이 엮어 응집되는 Sweeping Flocculation의 특징을 나타내었다. 하지만, 이온농도가 높아질수록 경우, EPS 고분자 구조체 내부 반발력이 감소하여 크기가 축소되고, 이에 따라 부유 입자 표면에 패치 형태로 흡착되었다. EPS가 패치형태로 입자에 흡착한 경우, 응집제 농도 증가에 따라 응집능 최적점이 형성되고, 이후 표면하전 역전이나 Steric Stabilization에 의해 응집능이 저감되는 형태를 나타낸다. 따라서,수중이온농도가 EPS의 사슬형 고분자 응집제의 크기, 형태(Morphology)를 결정하고, 더 나아가 응집능을 결정하는 중요한 인자로 나타났다. 따라서, 후속 연구를 통하여 생체고분자물질의 크기 및 형태 변화, 이에 따른 응집능변화를 면밀히 연구하고자 한다.

  • PDF

Design of Remote Field Eddy Current Sensor for Water-Wall Tube Inspection using Simulation (시뮬레이션을 활용한 유동층보일러 수냉벽튜브 검사용 원격장 와전류 탐상 센서 설계)

  • Gil, Doo Song;Kwon, Chan Wool;Cho, Yong-Sang;Kim, Hak-Joon
    • KEPCO Journal on Electric Power and Energy
    • /
    • v.5 no.1
    • /
    • pp.33-38
    • /
    • 2019
  • Thermal power generation accounts for the highest percentage of domestic power generation, among which coal-fired boiler generation accounts for the highest percentage. Coal boilers generate harmful substances and fine dust during coal combustion and have a serious effect on air pollution. So, fluidized-bed boilers have been introduced as eco-friendly coal boilers. It uses a fluid medium which affect the combustion temperature of coal. Because of it fluidized-bed boilers emit less pollutants than original one. Water-wall tubes play an important role in this fluidized bed boiler. Due to the fluid medium, the wall damage is more severe than the existing boiler. However, there is no quantitative maintenance technique in Korea yet. Remote field eddy current testing is a non-destructive evaluation technique that is often used for inspection of inner and outer wall of tube. it can inspect with non-contact and high speed. However, it is an inspection that proceeds from inside the pipe, and the water-wall tube is not able to enter the interior. In this study, we designed and simulated an external remote field eddy current sensor suitable for water-wall tube of a fluidized - bed boiler using simulations. By obtaining a signal similar to the existing remote field eddy current test, the criteria for the external remote field eddy current sensor design can be presented.

Mechanical Characteristics of 3-dimensional Woven Composite Stiffened Panel (3차원으로 직조된 복합재 보강 패널의 기계적 특성 연구)

  • Jeong, Jae-Hyeong;Hong, So-Mang;Byun, Joon-Hyung;Nam, Young-Woo;Kweon, Jin-Hwe
    • Composites Research
    • /
    • v.35 no.4
    • /
    • pp.269-276
    • /
    • 2022
  • In this paper, a composite stiffened panel was fabricated using a three-dimensional weaving method that can reduce the risk of delamination, and mechanical properties such as buckling load and natural frequency were investigated. The preform of the stringer and skin of the stiffened panel were fabricated in one piece using T800 grade carbon fiber and then, resin (EP2400) was injected into the preform. The compression test and natural frequency measurement were performed for the stiffened panel, and the results were compared with the finite element analyses. In order to compare the performance of 3D weaving structures, the stiffened panels with the same configuration were fabricated using UD and 2D plain weave (fabric) prepregs. Compared to the tested buckling load of the 3D woven panel, the buckling loads of the stiffened panels of UD prepreg and 2D plain weave exhibited +20% and -3% differences, respectively. From this study, it was confirmed that the buckling load of the stiffened panel manufactured by 3D weaving method was lower than that of the UD prepreg panel, but showed a slightly higher value than that of the 2D plain weave panel.

The Changes of Hardness and Microstructure of Dongchimi according to different kinds of water (물의 종류를 달리한 동치미의 경도 변화 및 세포벽 관찰)

  • 심영현;안기정;김지은
    • Korean journal of food and cookery science
    • /
    • v.20 no.1
    • /
    • pp.86-94
    • /
    • 2004
  • The purpose of this study was to investigate the changes of hardness and microstructure of Dongchimi cooked with various source of water(distilled water, purified water, Cho Jung Carbonated Natural water). This study was conducted to observe the changes of pH, total acidity, salt content, turbidity, texture and microstructure. Dongchimi cooked with source of water of water was fermented at 10$^{\circ}C$ for 46 days. The changes of pH on Dongchimi cooked with various source of water decreased in all samples during fermentation period, and then showed a slowly decrease after 12 days of fermentation. The total acidity of Dongchimi cooked with Cho Jung Carbonated Natural water was arrived slowly at best tasting condition 0.3 ∼ 0.4 point compared with other conditions. So Dongchimi cooked with Cho Jung Carbonated Natural water was continued to the best tasting condition for end of fermentation. At early stage of fermentation, the changes of turbidity of Dongchimi used Cho Jung Carbonated Natural water showed highly as compared with other test condition for 12th days of fermentation. The maximum cutting force of chinese radish of Dongchimi showed the highest value among all at the 25th day of ripening and then decreased gradually. The maximum cutting force of chinese radish of Dongchimi used Cho Jung Carbonated Natural water was the highest compared with other conditions at 25th day of fermentation. The calcium content of Dongchimi juice used Cho Jung Carbonated Natural water was observed hish at the early stage of fermentation and showed the highest value at 25th day of ripening. The calcium content of chinese radish and Dongchimi juice of Dongchimi cooked with water purifier was lower than that of Dongchimi cooked with Cho Jung Carbonated Natural water, and was higher than that of Dongchimi cooked with Distilled water at the early stage of fermentation. The magnesium content in all samples increased gradually from the early stage of fermentation. The microstructure showed disintegration appearance of middle lamella and cell wall during fermentation period.

Research on Mobile Wheelchair Lift Design (이동식 휠체어 리프트 디자인 연구)

  • 이명기
    • Archives of design research
    • /
    • v.15 no.4
    • /
    • pp.275-284
    • /
    • 2002
  • To improve the social and economic position of the disabled people and secure their human rights, an integrated society should be buill. To build such a society, an adequate access should be provided to the movement or in using buildings or facilities. The inconveniences from social life on the part of the disabled people might not result from their impairment or disability, but from physical and social barriers in the environment surrounding them. Therefore, it is necessary to reconstruct entire systems of the society as a disabled people-friendly structure in order to remove those barriers, make them stand their own feet in our communities and freely participate in the social activities. This will eventually lead to build a society in which all people including the disabled people can use those facilities in a more convenient way. It is almost impossible for the disabled people to safely and conveniently access to and use facilities and equipments and freely move to their desired places, without any help from others in Korea. Even though, there are currently many disabled people-related convenience facilities, they have been independently built without a connection with other facilities and buildings, thus not greatly useful. Even when convenience facilities have been built, mostly they are superficially set up; therefore, in many cases, the disabled peOple cannot use those facilities. In this. research, I tried a new concept of mobile wheelchair lift design, which the disabled people can operate without restrictions, when using the public facilities. The key to this research was to develop the existing import-oriented simple functional products to a new system with functional safety and high quality orientation. Also, this research aimed at bringing an. import substitution effect, as well as preempting the mobile wheelchair lift market by advancing into overseas markets through application of new image designs in the field of disabled people aid equipments.

  • PDF

Continuous Process for the Etching, Rinsing and Drying of MEMS Using Supercritical Carbon Dioxide (초임계 이산화탄소를 이용한 미세전자기계시스템의 식각, 세정, 건조 연속 공정)

  • Min, Seon Ki;Han, Gap Su;You, Seong-sik
    • Korean Chemical Engineering Research
    • /
    • v.53 no.5
    • /
    • pp.557-564
    • /
    • 2015
  • The previous etching, rinsing and drying processes of wafers for MEMS (microelectromechanical system) using SC-$CO_2$ (supercritical-$CO_2$) consists of two steps. Firstly, MEMS-wafers are etched by organic solvent in a separate etching equipment from the high pressure dryer and then moved to the high pressure dryer to rinse and dry them using SC-$CO_2$. We found that the previous two step process could be applied to etch and dry wafers for MEMS but could not confirm the reproducibility through several experiments. We thought the cause of that was the stiction of structures occurring due to vaporization of the etching solvent during moving MEMS wafer to high pressure dryer after etching it outside. In order to improve the structure stiction problem, we designed a continuous process for etching, rinsing and drying MEMS-wafers using SC-$CO_2$ without moving them. And we also wanted to know relations of states of carbon dioxide (gas, liquid, supercritical fluid) to the structure stiction problem. In the case of using gas carbon dioxide (3 MPa, $25^{\circ}C$) as an etching solvent, we could obtain well-treated MEMS-wafers without stiction and confirm the reproducibility of experimental results. The quantity of rinsing solvent used could be also reduced compared with the previous technology. In the case of using liquid carbon dioxide (3 MPa, $5^{\circ}C$, we could not obtain well-treated MEMS-wafers without stiction due to the phase separation of between liquid carbon dioxide and etching co-solvent(acetone). In the case of using SC-$CO_2$ (7.5 Mpa, $40^{\circ}C$), we had as good results as those of the case using gas-$CO_2$. Besides the processing time was shortened compared with that of the case of using gas-$CO_2$.

Tegumental ultrastructure of juvenile and adult Echinostoma cinetorchis (이전고환극구흡충 유약충 및 성충의 표피 미세구조)

  • 이순형;전호승
    • Parasites, Hosts and Diseases
    • /
    • v.30 no.2
    • /
    • pp.65-74
    • /
    • 1992
  • The tegumental ultrastructure of juvenile and adult Echinostoma cinetorchis (Trematoda: Echinostomatidae) was observed by scanning electron microscopy. Three-day (juvenile) and 16-day (adult) worms were harvested from rats (Sprague-Dawley) experimentally fed the metacercariae from the laboratory-infected fresh water snail, Hippeutis cantori. The worms were fifed with 2.5% glutaraldehyde, processed routinely, and observed by an ISI Korea DS-130 scanning electron microscope. The 3-day old juvenile worms were elongated and ventrally curved, with their ventral sucker near the anterior two-fifths of the body. The head crown was bearing 37∼38 collar spines arranged in a zigzag pattern. The lips of the oral and ventral suckers had 8 and 5 type II sensory papillae respectively, and bewteen the spines, a few type III papillae were observed. Tongue or spade-shape spines were distributed anteriorly to the ventral sucker, whereas peg-like spines were distributed posteriorly and became sparse toward the posterior body. The spines of the dorsal surface were similar to those of the ventral surface. The 16-day old adults were leaf-like, and their oral and ventral suckers were located very closely. Aspinous head crown, oral and ventral suckers had type II and type III sensory papillae, and numerous type I papillae were distributed on the tegument anterior to the ventral sucker. Scale-like spines, with broad base and round tip, were distributed densely on the tegument anterior to the ventral sucker but they became sparse posteriorly. At the dorsal surface, spines were observed at times only at the anterior body. The results showed that the tegument of E. cinetorchis is similar to that of other echinostomes, but differs in the number and arrangement of collar spines, shape and distribution of tegumenal spines, and type and distribution of sensory papillae.

  • PDF

High Resolution MR Images from 3T Active-Shield Whole-Body MRI System (3T 능동차페형 전신 자기공명영상 장비로부터 얻어진 고해상도 자기공명영상)

  • Bo-Young Choe;Sei-Kwon Kang;Myoung-Ja Chu;Hyun-Man Baik;Euy-Neyng Kim
    • Investigative Magnetic Resonance Imaging
    • /
    • v.5 no.2
    • /
    • pp.138-148
    • /
    • 2001
  • Purpose : Within a clinically acceptable time frame, we obtained the high resolution MR images of the human brain, knee, foot and wrist from 3T whole-body MRI system which was equipped with the world first 37 active shield magnet. Materials and Methods : Spin echo (SE) and Fast Spin Echo (FSE) images were obtained from the human brain, knee, foot and wrist of normal subjects using a homemade birdcage and transverse electromagnetic (TEM) resonators operating in quadrature and tuned to 128 MHz. For acquisition of MR images of knee, foot and wrist, we employed a homemade saddle shaped RF coil. Topical common acquisition parameters were as follows: matrix=$512{\times}512$, field of view (FOV) =20 cm, slice thickness = 3 mm, number of excitations (NEX)=1. For T1-weighted MR images, we used TR = 500 ms, TE = 10 or 17.4 ms. For T2-weighted MR images, we used TR=4000 ms, TE = 108 ms. Results : Signal to noise ratio (SNR) of 3T system was measured 2.7 times greater than that of prevalent 1.5T system. MR images obtained from 3T system revealed numerous small venous structures throughout the image plane and provided reasonable delineation between gray and white matter. Conclusion The present results demonstrate that the MR images from 3T system could provide better diagnostic quali\ulcorner of resolution and sensitivity than those of 1.5T system. The elevated SNR observed in the 3T high field magnetic resonance imaging can be utilized to acquire images with a level of resolution approaching the microscopic structural level under in vivo conditions. These images represent a significant advance in our ability to examine small anatomical features with noninvasive imaging methods.

  • PDF

Canine MR Images from 3T Active-Shield MRI System (3T 능동차폐형 자기공명영상 장비로부터 얻어진 개의 자기공명영상)

  • Choe, Bo-Young;Park, Chi-Bong;Kang, Sei-Kwon;Chu, Myoung-Ja;Kim, Euy-Neyng;Lee, Hyoung-Koo;Suh, Tae-Suk
    • Progress in Medical Physics
    • /
    • v.12 no.2
    • /
    • pp.113-124
    • /
    • 2001
  • For veterinary imaging diagnosis, we obtained MR images of the canine brain, spine, kidney and pelvis from 3T MRI system which was equipped with the world first 3T active shield magnet. Spin echo (SE) and fast Spin Echo (FSE) images were obtained from the canine brain, spine, kidney and pelvis of normal and sick dogs using a homemade birdcage and transverse electromagnetic (TEM) resonators operating in quadrature and tuned to 128 MHz. In addition, we employed a homemade saddle shaped RF coil. Typical common acquisition parameters were as follows: matrix=512$\times$512, field of view (FOV)=20cm, slice thickness=3 w, number of excitations (NEX)=1. For T1-weighted MR images, we used TR=500 ms, TE=10 or 17.4 ms. For T2-weighted MR images, we used TR=4000 ms, TE=108 ms. Signal to noise ratio (SNR) of 3T system was measured 2.7 times greater than that of prevalent 1.57 system. The high resolution images acquired in this study represent more than a 4-fold increase in in-plane resolution relative to conventional images obtained with a 20 cm field of view and a 5 mm slice thickness. MR images obtained from 3T system revealed numerous small venous structures throughout the image plane and provided reasonable delineation between gray and white matter The present results demonstrate that the MR images from 3T system could provide better diagnostic quality of resolution and sensitivity than those of 1.5T system. The elevated SNR observed in the 3T high field magnetic resonance imaging can be utilized to acquire images with a level of resolution approaching the microscopic structural level under in vivo conditions. These images represent a significant advance in our ability to examine small anatomical features with noninvasive imaging methods. Moreover, MRI technique could begin to apply for veterinary medicine in Korea.

  • PDF

Stability and Damage Evaluation of the Buddha Triad and 16 Rock-Carved Arhat Statues at Seongbulsa Temple in Cheonan, Korea (천안 성불사 마애석가삼존과 16나한상의 손상도 및 안정성 평가)

  • Yang, Hyeri;Lee, Chan Hee;Jo, Young Hoon
    • Korean Journal of Heritage: History & Science
    • /
    • v.53 no.4
    • /
    • pp.78-99
    • /
    • 2020
  • The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.