• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.254-261
• /
• 2005

Dental statistics for Koreans are far from complete and the majority of previous researches have adopted techniques such as radiological analysis and sectioning of teeth for morphological information, which are time-consuming, less accurate and destructive. Thus, a new nondestructive method is necessary to get precise dental standardization data for Koreans. For the above purpose, each of the first premolars was scanned by a micro-CT (SkyScan, Belgium) with a resolution of $21.31{\mu}m$ at an interval of 0.022mm along the plane horizontally parallel to an occlusion plane. Internal and external morphological sections were measured and compared to the values in the average tooth size table for permanent teeth presented by G. V Black.

• Korean Journal of Ichthyology
• /
• v.11 no.2
• /
• pp.126-133
• /
• 1999

Ultrastructure of the zona radiata and the micropyle of ripe eggs in the rainbow trout (Oncorhynchus mykiss), catfish (Silurus asotus) and loach (Misgurnus anguillicaudatus) were examined by light, scanning and transmission microscopes. The egg micropyle of rainbow trout and catfish consists of a funnel-shaped vestibule and a tapered canal transversing the zona radiata. The micropyle of rainbow trout and catfish showed the similar structure with flat pit and long canal. The micropylar wall showed the clockwise spiral structure in rainbow trout. The micropyle of the loach showed the type with a hollow pit leading into a short canal and the micropylar wall showed the counterclockwise spiral structure. There are numerous and various size pores at the surface area around the opening in every experimented fish. Interconnecting ridges were observed in the unfertilized eggs of every fish.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.73-78
• /
• 1996

Type 316L 스테인레스강에 대한 질소첨가의 효과를 분석하기 위해 질소를 소량(0.024%)첨가한 합금과 적정량(0.15%) 첨가한 합금을 용해하여 입계부식특성 평가를 하였다. Oxalic시험 및 DL-EPR 시험 결과 적정량의 질소를 첨가한 합금이 소량 첨가한 금보다 우수한 예민화 특성을 보였다. TEM에 의한 미세구조 분석 결과 저질소 합금의 경우 비교적 짧은 열처리 시간에 M$_{23}$C$_{6}$ type의 석출물이 입계를 따라 형성되고 시효시간이 경과 할수록 그양이 급격히 증가하는 양상을 보인 반면에 적정 질소 첨가 합금의 경우 탄화물 생성이 비교적 긴 시효시간으로 늦추어져 예민화 실험 결과와 일치된 결과를 보였다. 두 합금 모두에서 탄화물 이외에 Mo의 함량이 매우 높은 석출물이 관찰되었는데 적정질소 첨가강의 경우 시효 시간의 경과에 따라 초기의 작은 cluster들의 형태에서 시작하여 얇은 박막의 형태로 입계면을 따라 성장하는 양상을 보였고, 반면에 저질소합금의 경우 입계를 따른 작은 석출물들이 cluster들로는 성장하였으나 장시간 시효가 진행됨에 따라 탄화물의 성장에 의해 박막 형태로는 성장하지 못하였다. Mo-rich 박막형상 석출물에 대한 분석 결과 20-면체 준결정상의 형태에 매우 가까운 결정구조를 보였으며 때로 η상과 매우 밀접한 회절 패턴도 관찰되었다. 이러한 상은 적정 질소첨가 합금에서의 탄화물 생성 지연과도 관련이 있을 것으로 추정되었다.

• Journal of Biomedical Engineering Research
• /
• v.20 no.6
• /
• pp.539-546
• /
• 1999

현재 상용화되고 있는 치과용 76.5% Pd-11.2% Cu-7.2% GarP 합금의 왁스모형을 원심주조기로 주조하여, 임상조건의 탈개스 및 세라믹 소성처리를 하였다. 이에따른 각각의 시편에 대해 미세조직의 변화를 주사전자현미경 및 EDS로 관찰하고, 최종적인 투과전자현미경으로 조사하였다. 각 조건의 편석, 결정립계 및 석출물부위를 주사전자현미경과 EDS 고 관찰한 결과, 이원계 Pd-GA합금의 안정상들에 해당하는 정량적인 조성비는, 단지 상대적으로 Ga의 성분비만 높게 감지되었다. 특히, 세라믹소성 처리후 미세조직에서 형성된 석출물에 근접한 기지조직일수록 Ga의 농도가 상대적으로 줄어든 고갈현상을 확인하엿다. 또한 투과전자현미경의 제한시야회절도형 분석결과, 주조 및 탈개스처리 후 미세조직의 편석부위에서는 GA의 가장 큰 강도를 보였고, 또 Ga과 Pd 고용체 사이에 미세한 판상의 석출물에 기인하는 줄무늬를 관찰하였다. 한편, 세라믹소성처리후 미세조직의 석출물은 금속간화합물 Pd2Ga으로 밝혀졌으며, 기지조직은 <100> 방향을 따라 약 25nm의 폭을 가지는 미세한 섬유상 형태의 소위 "tweed 조직'을 형성하였다.성하였다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.65-73
• /
• 1998

본연구에서는poystyrene-block-poly (ethlene-co-butylene)-block-polystyrene(SEBS) 삼중블록 공중합체와 저분자량 단일중합체인 Hercotac 1149 (H1149)의 70/30 (w/w) 혼합물 의 미세상분리와 그동력학을 유변물성 측정법과 SAXS 실험을 통하여 연구해 보았다. 먼저 혼합물의 미세상분리 온도를 유변물성 측정법과 SAXS 실험을 통해 각각구한 다음 샘플을 미세상분리 온도보다 높은 온도에서 그이하의 온도로 급냉시킨 후 유변물성과 산란강도의 사간에 따른 변화로부터 미세상분리 동력학에 대한 정보를 구하였다. 이렇게 얻어진 데이터 를 Avrami 형태의 핵생성 성장(NG) 메커니즘으로 해석해 보았는데 최대산란강도 Imax 뿐만 아니라 저장 점탄성계수 G＇과 손실 점탄성계수 G＂의 시간에 따른 변화를 잘 예측할수 있 었다. 한편 서로다른 두 time-resolved 실험으로부터 Avrami 플롯을 그려서 구해진 Avrami 변수들은 같은 급냉 깊이에서는 서로 잘 일치함을 확인하였다. 반감기는 급냉 깊이가 증가 함에 따라 점차 감소하는 경향을 보였는데 이는 급냉 깊이가 클수록 미세상분리가 더 빨리 진행되고 있음을 보여주는 것이다. 또한 Avrami 지수는 급냉 깊이가 증가함에 따라 3에서 4로 급격히 변했는데 이로부터 급냉 깊이가 작을 때에는 70/30 (w/w) SEBS/H1149 혼합물 의 미세상분리가 불균일 핵생성 성장 메커니즘에 따라 진행되고 급냉 깊이가 더 커지면 미 세상분리가 스피노달 상분리 메커니즘으로 변하고 있음을 예측할수 있었다.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.625-639
• /
• 2019

Microplastics are one of the substances threatening the marine ecosystem. Here, we summarize the status of research on the effect of microplastics on marine life and suggest future research directions. Microplastics are synthetic polymeric compounds smaller than 5 mm and these materials released into the environment are not only physically small but do not decompose over time. Thus, they accumulate extensively on land, from the coast to the sea, and from the surface to the deep sea. Microplastic can be ingested and accumulated in marine life. Furthermore, the elution of chemicals added to plastic represents another risk. Microplastics accumulated in the ocean affect the growth, development, behavior, reproduction, and death of marine life. However, the properties of microplastics vary widely in size, material, shape, and other aspects and toxicity tests conducted on several properties of microplastics cannot represent the hazards of all other microplastics. It is necessary to evaluate the risks according to the types of microplastic, but due to their variety and the lack of uniformity in research results, it is difficult to compare and analyze the results of previous studies. Therefore, it is necessary to derive a standard test method to estimate the biological risk from different types of microplastics. In addition, while most of the previous studies were conducted mostly on spheres for the convenience of the experiments, they do not properly reflect the reality that fibers and fragments are the main forms of microplastics in the marine environment and in fish and shellfish. Furthermore, studies have been conducted on additives and POPs (persistent organic pollutants) in plastics, but little is known about their toxic effects on the body. The effects of microplastics on the marine ecosystems and humans could be identified in more detail if standard testing methods are developed, microplastics in the form of fibers and fragments rather than spheres are tested, and additives and POPs are analyzed. These investigations will allow us to identify the impact of microplastics on marine ecosystems and humans in more detail.

• The Korean Journal of Soil Zoology
• /
• v.5 no.2
• /
• pp.101-112
• /
• 2000

Spiders usually have poor vision but not the jumping spiders. Their eight eyes are located on its distinctive box-shaped head and relatively well developed. The Spiders were fixated with 3% glutaraldehyde and thin section was performed with ultra-microtome. The specimens were observed with light microscopy, transmission and scanning electron microscopy. Eye area of jumping spider is competed of three rows. The first eye row comprise four eyes. Among them, two anterior median eyes are the largest and two anterior lateral eyes are relatively small. The former are main-eyes and have excellent vision. The second row, which has the two smallest eyes, is located about midway between the first and third rows. The third row is about half-way back on the thorax and eyed of which are middle size. To investigate ultrastructure of salticid spiders'eye, Menemerus fulvus was chosen. All of Menemerus fuvus's eyes are composed of cornea, lens, vitreous body and retina in histologically. Cornea layer, linked to exocuticle of exoskeleton. is regular layer structure without any cell tripe. Lenses are biconvex type. Retinas comprise well developed microvilli-shape rhabdomeres, unpigmented supporting cells, and pigmented cell. Retinas of anterior median eyes are surrounded by circular cylinder-shaped vitreous body, photoreceptor, i.e. rhabdomeres, of it is irregularly arranged compared to the other eyes.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.95-101
• /
• 2005

The aim of this study was to evaluate the microleakage of teeth according to root canal preparation with & without apical enlargement in various size of apical foramen. 60 extracted one canal roots were cross-cutted at 5 mm from root apex and divided into two groups according to their apical foramen size of large (L) and small (S). Each group was subdivided into two groups accordance with their cross-sectional configuration at 5 mm from apex, round (R) and ovoid (O); SR Group, SO Group LR Group, LO Group. Each group was shaped in .02 taper by Quantec series Nickel-Titanium (NiTi) rotary file, obturated by lateral condensation method. Leakage was measured using a fluid transport model under 40 $cmH_2O$ pressure. After the leakage test, blocks which had showed the leakage retreated with .04 taper and ,06 taper and evaluated the degree of fluid filtration in each group. The data was analysed statistically using chi-square test and fisher's exact test. The results obtained were as follows : 1. Significant difference in leakage was found in groups which had different apical foramen size in .02 taper instrumentation (p < 0.05), but not in .04 taper instrumentation (p > 0.05) 2. The difference in microleakage according to the shape of canal was not evident at 5 mm from apex (p > 0.05). 3. There was correlation between .02 taper instrumentation and .04 taper instrumentation in LR group, LO group (p < 0.05).

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.405-431
• /
• 2008

Cuticle micromorphology of 22 species of Quercus and outgroup were examined by the SEM. Twenty-two species selected each two or three species in all section of the genus Quercus. The genus Trigonobalanus and Alnus are selected as outgroups. Ten characters of the inner surface and eight characters of the outer surface of the cuticle have been described. Some characters, such as the present of papillae, arrangement of subsidiary cell, shape of anticlinal cell wall are considered important character for infrageneric classification. A parsimony analysis of 18 characters resulted in 72 most parsimonious trees with its lengths of 66 steps. The topology obtained from the analysis showed two major lineages. Subgenus Cyclobalanopsis formed one clade by 75% and subgenus Quercus formed another clade by 57% bootstrap value. Based on the cuticle morphology, the two subgenus delimitation of Camus was supported. However, sect. Erythrobalanus and sect. Cerris formed one group, and sect. Lepidobalanus formed polytomy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.730-736
• /
• 1999

The roundnose flounder's (Eopsetta grigorjewi) spermiogenesis and fine structure of the spermatozoon were examined by means of the scanning and transmission electron microscopy, During the spermiogenesis, the chromatin of the spermatid became fine granular form, and progressively condensed into many large globules, finally homogeneously condensed in the spermatozoan head. The main characteristics of the spermiogenesis were the disappearanre of Golgi complex, the appearance of microfilament the reduction of mitochondria and the appearance of Iysosome in the cytoplasm. A spermatozoon consisted of head and tail, but the acrosome was absent. The cytoplasmic collar containing seven mitochondria was observed in the posterior part of the head. The well-developed axonemal lateral fins were observed in the tail. The cross section of the axial filament showed '9+2' axonemal structure of microtubules, and the numerous vesicles were observed in the cytoplasm.