• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.210-210
• /
• 2003

휘스커상의 뮬라이트의 생성온도와 속도는 출발물질로 사용되는 알루미나와 실리카의 화학적 순도, 입자크기 그리고 결정형태에 의존하며, 알루미나와 실리카의 조성비에 따라 생성되는 뮬라이트의 형태가 변한다. 각 원료에 대한 반응성을 관찰하기 위하여 출발원료인 Al(OH)$_3$, 비정질 SiO$_2$, AlF$_3$를 혼합 각각 단일조성과 2상 및 3상의 원료를 혼합 분쇄하여 분무건조한 조립분말을 5$0^{\circ}C$ 구간으로 나누어 상온에서 130$0^{\circ}C$까지 튜브 로에서 열처리하였다. Al(OH)$_3$와 AlF$_3$를 단독으로 열처리하였을 경우에는 안정한 상태로 열처리가 진행되었으나, 혼합하였을 경우에는 40$0^{\circ}C$ 이상의 온도에서 서서히 반응하였다. 각 온도구간에서 열처리한 시편은 미세구조 관찰과 상분석을 통하여 플루오르 토파즈와 휘스커상의 뮬라이트의 생성을 관찰하였으며, 생성된 휘스커 뮬라이트는 조립의 형상을 원형대로 보존하였으며, 조립의 강도를 측정하기 위하여, 초음파 분산기와, 초음파 Homgeniger를 이용하여 처리한 결과 대부분 원래의 형상을 유지하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.239-244
• /
• 2001

Hot hydrostatic extruder was developed. The main objective of the development is forming fine wire and tube. On account of effectiveness and high performance, the extruder was designed to have double action. Therefore the main cylinder and mandrel can be driven independently. To cope with severe condition of high temperature and pressure, wire-wound container equipped with heater was used. Sealing technique also is important in this process, so seal ring was made of super-elastic metal. Another key for successful forming is choice of proper pressure medium. Fine wire and tube produced by the extruder can be used in semiconductor industry and medicine.

• Transactions of Materials Processing
• /
• v.23 no.8
• /
• pp.507-512
• /
• 2014

The objective of the current investigation is to establish techniques in micro pattern forming operations of polymeric circular tubes by using hydrostatic pressing. This method was developed and successfully applied to the micro pattern forming on polymeric plates. The key idea of the new technique is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature of the polymeric substrates. The new process is thought to be a promising micro-pattern fabrication technique for two reasons; first, (hydro-) isostatic pressing ensures a uniform micro-pattern replicating condition regardless of the substrate area and thickness. Second, multiple curved substrates can be patterned at the same time. With the prototype forming machine for the new process, micro prismatic array patterns, 25um in height and 90 degrees in apex angle, were successfully made on the PMMA circular tubes with diameters of 5~40mm. These results show that this process can be also used in the micro pattern forming process on curved plates such as circular tube.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.7
• /
• pp.359-363
• /
• 2006

Single-walled carbon nanotubes (SWCNTs) with few defects and very small amount of amorphous carbon coating have been synthesized by catalytic decomposition of methane in $H_2$ over well-dispersed metal particles supported on MgO. The yield of SWCNTs was estimated to be 88.5% and the purities of SWCNTs thus obtained were more than 90%. Peak of the radial breathing mode in the Raman spectrum demonstrated that the diameters of synthesized CNTs are in the range 0.4-2.0 nm. Our results also indicated that MgO support materials are useful to a large-scale synthesis of high-quality SWCNTs. Increasing temperature could remarkably increase the yield and also improve the quality of SWCNTs from catalytic decomposition of methane. The morphologies and microstructures of the synthesized carbon materials were characterized by scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Raman spectroscopy, and X-ray diffraction (XRD).

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.169-172
• /
• 2004

We fabricated MWNT-added glass fabric/epoxy composites. We observed the distribution of MWNTs in the composites using scanning electron microscopy and conformed that most of MWNTs exist in matrix rich region and interface between yams in warp and fill directions. We also investigated the change of permittivities with MWNT concentrations. Only $1wt\%$ MWNTs leads to high permittivity and electromagnetic waves are impossible to be transmitted to more than $3wt\%$ MWNT-added composites, which means the characteristics of these composites are comparable to those of metals or carbon fiber-reinforced composites.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.353-356
• /
• 2002

심근 경색 및 뇌졸중 등 혈관과 관련된 질환들의 진단 및 치료의 목적으로 미세 크기의 원형 배열 초음파 트랜스듀서가 사용되고 있다. 원형 배열 초음파 트랜스듀서는 종래의 선형 배열 트랜스듀서에 비해 반경 방향의 입체적 진단을 가능케 하고 높은 감도 및 해상도를 구현할 수 있는 장점을 가진다. 본 연구에서는 이러한 원형 배열 초음파 트랜스듀서의 개발을 위하여, 유한요소법 및 이론적인 해석으로 트랜스 eb서의 방사특성을 분석함으로써 무지향성을 이루기 위한 트랜스듀서 내 진동자의 최적 규격을 설정하였다. 나아가 해석 결과에 따라 직경이 약 10mm정도가 되는 알루미나 $Al_2O_3$ 튜브에 32개의 진동자가 원형으로 배열된 트랜스 듀서 시작품의 제작 및 방사특성 측정 실험을 수행함으로써 설계 결과의 타당성을 검증하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.372-372
• /
• 2007

Titanium oxide nanotube arrays were fabricated by the anodization of pure titanium thin film deposited at $500^{\circ}C$ on silicon substrates. The titania nanotubes were grown by anodization in nonaqueous-base electrolytes at different potentials between 5 V and 30 V. $TiO_2$ nanotube array with a small pore diameter of 40 nm and long titanium oxide layer of $4\;{\mu}m$ was obtained. The $TiO_2$ nanotube array was used as a porous electrode for quartz crystal microbalance (QCM). Nanoporous morphology of electrode will increase the sensitivity of microbalance.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.31-34
• /
• 2002

Imaging techniques using x-ray beam at high energies (>6KeV) such as contact radiography, projection microscopy, and tomography have been used to nondestructively discern internal structure of objects in material science, biology, and medicine. This paper introduces the x-ray micro-imaging method using 1B2 micro-probe line of PAL (Pohang Accelerator Laboratory). Cross-sectional information on low electron density materials can be obtained by probing a sample with coherent synchrotron x-ray beam in an in-line holography setup. Living organism such as plants, insects are practically transparent to high energy x-rays and create phase shift images of x-ray wave front. X-ray micro-images of micro-bubbles of $20\~120\;{\mu}m$ diameter in an opaque tube were recorded. Clear phase contrast images were obtained at Interfaces between bubbles and surrounding liquid due to different decrements of refractive index.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.349-351
• /
• 2021

Youtube 동영상 업로드 시, 사용자가 직접 주제를 설정해야 하는 어려움이 있다. 본 연구에서는 사용자가 입력하는 제목과 설명정보를 이용하여 자동으로 주제를 분류하는 연구를 진행하였다. 이를 위해 한국어기반의 컨텐츠 중 고빈도의 8개 주제 카테고리를 선정하고, 이를 1.3만건의 학습데이터를 크롤링을 통해 구축하였다. 또한, 다양한 알고리즘들에 대한 최대성능을 확인하기 위해 대표적인 텍스트 분류 방법인 SVM과 LSTM기법 및 BERT 모델기반 미세적용(fine-tuning)을 시도하였다. 결과적으로 Bert-multiligual (base)를 fine-tuning한 실험에서 최대 94%의 정확도를 확인하였다. 하지만, Youtube 동영상 특성상 여러 주제를 가진 것들이 상당수 존재하기에, 실제 체감정확도는 더 높을 것으로 기대된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.377-385
• /
• 2013

To identify the effects of an outflow area on pool boiling heat transfer in a vertical annulus, three different flow restrictors were studied experimentally. For the test, a heated tube of smooth stainless steel and water at atmospheric pressure were used. Both annuli with open and closed bottoms were considered. To validate the effects of the outflow area on the heat transfer, the results of the annulus with the restrictor were compared with the data for the plain annulus without the restrictor. The reduction of the outflow area ultimately results in a decrease in the heat transfer. As the outflow area is very small, a slight increase in heat transfer is also observed. The major cause of this tendency is explained as the difference in the intensity of liquid agitation cause by the movement of coalesced bubbles. It is identified that the convective flow, pulsating flow, and evaporative mechanism are considered as the important mechanisms.