• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• The Korean Journal of Rheology
• /
• v.3 no.2
• /
• pp.124-134
• /
• 1991

세라믹 재료들을 성공적으로 사출성형하기 위한 적절한 사출조건을 얻기 위하여 그 동안 많은 실험을 하여 왔으나 게이트 크기가 미치는 영향에 대한 연구는 미진하였다. 본 연구에선 압출기를 사용하여 미세한 질화규소분말과 결합제시스템을 혼합하였으며 이러한 세라믹혼합물을 이용하여 사출압력, 보압시간, 보압, 배럴온도, 게이트의 형태와 크기 등을 변화시키면서 사출성형 실험을 수행하였다. 55%의 세라믹혼합물을 사출실험한 결과 적절한 게이트의 크기와 형태를 선택하고 105 MPa의 사출압력과 10초의 보압시간, 24$0^{\circ}C$의 배럴온 도와 같은 사출조건하에서 성형한다면 불완전 충전 체적수축과 젯팅현상을 최소화시킬수 있 어 성공적으로 인장시편과 굽힘시편을 성형할 수 있음을 알수있었다. 상용프로그램인 C-MOLD를 이용하여 사출조건과 게이트의 크기를 변화시키면서 혼합물의 유동특성을 해석 하였다. 유동해석 결과. 세라믹혼합물은 순수고분자보다 열전도도가 크고 비열이 작아서 고 화가 빨리 되므로 게이트의 크기는 사출압력, 배럴온도와 같은 사출조건과 더불어 중요한 사풀변수임을 예측할 수 있었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.656-661
• /
• 1995

Ex-AUC 공정으로 제조된 $UO_2$ 분말에 대하여 ball-milling 시간 (0-4 시간)에 따른 분말의 특성변화 그리고 성형성(성형압력 구간 : 200~400 MPa)을 조사하였다. ex-AUC $UO_2$ 분말에서는 그 입자크기가 비교적 커서 (평균 입자크기 : 28$\mu\textrm{m}$) ball-milling 의 효과가 크게 나타났다. Ball-mill 에 의한 분말입자의 미세화효과는 1 $\mu\textrm{m}$ 보다 큰 크기를 갖는 분말입자에서 주로 나타났다. 또한 ball-milling 에 의해 최대로 감소될 수 있는 분말입자 크기는 약 0.5$\mu\textrm{m}$로 나타났다. Ball-milling 시간에 따라 분말입자 크기는 감소하였으며, 동일한 성형조건하에서 ball-milling 처리된 분말의 성형밀도는 원료분말의 것에 비하여 증가하였다. 이것은 ball-milling 처리에 의해 미분쇄된 분말입자에 기인되는 것으로 나타났다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.605-611
• /
• 1998

A computer experimental model for analyzing the microstructures and properties of vibratory deposited power compacts was developed. The effects of some significant variables such as amplitude, frequency, cycle, etc. on the change of diffraction patterns and packing densities of the deposited powder compacts were examined. In addition, the condition of phase transition from non-crystalline phase to crystalline one was determined. Data obtained from the present method quite well fitted the empirical correlations for real experimental data. In conclusion, the present model is so useful to investigate the densification and ordering of vibratory compaction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1601-1604
• /
• 2005

The demand increasing of optical applications like as display devices derives interest for fabrication process. The product s development is apt to fabricate numerous thin and wide surfaces with micro pattern. Naturally that needs injection molding fabrication for the mass production. In existing manufacturing, the product quality is controlled by input fabrication condition from the outside. That can be called as a try and error method and not fundamentally solve the troubles; imperfect replication, war page, short shot, etc. To understand the cause and bring a solution, it is needed that check of changing in the cavity. This study can catch them. Data acquisition system about temperature and pressure distribution is settled and can get some data. From this research, other studies related with DAQ in cavity can start on the easier step.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.205-208
• /
• 2007

We injection molded a thin plate with micro prism patterns on its surface and investigated the fidelity of replication of the micro pattern depending on the process parameter such as mold temperature, injection rate or packing pressure. The size of the $90^{\circ}$ prism pattern is $50{\mu}m$ and the size of the plate is $400mm{\times}400mm$. The thickness is 1mm. The fidelity of the replication turned out quite different according to the process parameters and location of the patterns of the plate. We measured the cavity pressure and temperature in real-time during the molding to analyze the effect of the local melt pressure and temperature on the micro pattern replication.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.144-144
• /
• 2003

니켈계 내열합금의 성형은 수백 $^{\circ}C$에 이르는 고온에서 이루어지기 때문에 열간성형 과정에서 소재 내부의 미세조직 변화에 대한 이해는 부품의 특성 제어 측면에서 매우 중요하다. 특히 열간 동적 재결정에 의해 발생되는 결정립 구조의 변화를 적절히 조절함으로써 부품의 특성을 극대화 할 수 있다. 본 연구에서는 Ni-Fe계 초내열합금에 대한 고온 압축실험과 압축시편에 대한 EBSD 분석을 통해 열간 변형 과정에서 발생하는 소재 내부의 동적인 결정립 구조의 변화를 정량적으로 분석하고자 하였다. 고온 압축시험은 101$0^{\circ}C$, 1066$^{\circ}C$의 온도 조건과 0.5s-1, 0.005s-1의 변형율 속도 조건에서 최대 진변형율 0.7까지 수행하였으며 진변형율에 따른 결정립 조직 변화를 관찰하기 위해 진변형 율에도 변화를 주어 실험을 수행하였다. 이들 고온 압축시편은 응력방향에 평행한 면에 대한 미세조직 관찰을 통해 재결정립 크기, 분율 및 결정립계의 특성 변화에 대한 정량적 연구를 수행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.261-264
• /
• 2007

In this study, the consolidation and casting processes of fine Si powders, by-products of making high purity Poly-Si rods in the current method, were systematically investigated for use as economical solar-grade feedstock. Morphology, size, and contamination type of the poly-Si fine powders were inspected by combined analysis of SEM, particle size analyzer, and FT-IR. Poly-Si powder compacts were tried to fabricate by a consolidation process without a binding agent and then their density ratio and strength were evaluated. Finally, the electrical resistivity of the specimens prepared by an electromagnetic casting method was examined for purity assessment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1748-1753
• /
• 2003

This paper describes the forming of fine gear housing using RP system. In order to apply 3D model formed through CAD software to RP system, it is necessary of transforming 3D model into STL file format. Besides, when the same shape is formed repetitively, we must solve the program that the shape accuracy of prototype is irregular. Therefore, we will make an experiment on influence of 3D model, file transformation and prototype on facetres, AutoCAD system value. On the basis of experimental result, we will develop an automatic file transformation program for RP. In the final process, we will manufacture on a better prototype according to the experiment result of fine gear housing.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1129-1131
• /
• 2008

We injection molded a plate with micro surface features including micro prizms & micro channels patterns on its surface and investigated the replication of the micro features depending on the mold temperature which is one of typical process parameters. The size of the patterns were 8um, 10um, 15um of prizm features & 15um, 30um, 45um of channel features. The size of the plate is about $400mm{\times}400mm$ and the thickness is 1mm of plate. the repliction of the mucro features turned out to depend on the mold temperature and also the location on the plate. The pressure and the feature of the melt in the cavity were also measured in real-time for the investigation on the micro feature replication.