• Particle and aerosol research
• /
• v.14 no.2
• /
• pp.25-33
• /
• 2018

In this study, the concentration of fine indoor dust and the size distribution of fine indoor dust were analyzed by measuring the dust generated during the cleaning process of an indoor office. We measured $PM_{10}$, $PM_{2.5}$, and $PM_{1.0}$ and analyzed the size distributions of dust larger than $0.3{\mu}m$ in diameter during cleaning. The results showed that the concentration of $PM_{10}$ increased rapidly during cleaning, however $PM_{1.0}$ did not increase. Before cleaning with a broom, the fine dust concentration was about $50{\mu}g/m^3$, but increased to about $400{\mu}g/m^3$ as cleaning progressed. In the case of indoor cleaning with a vacuum cleaner, the concentration of $PM_{10}$ increased during the cleaning process and the increase of $PM_{2.5}$ was relatively small. $PM_{1.0}$ did not increase as in the case of cleaning the broom.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.10-10
• /
• 1998

본 연구에서는 제트 추진 기관의 터빈 익렬에서의 유동과 대기 중에 부유되어 있는 입자 또는 연소 생성물들이 제트엔진 내부로 유입될 경우 이에 따른 압축기 및 터빈 날개의 마모 및 충돌 부위를 예측하기 위하여 수치해석을 수행하였다. 일반적으로 각종 항공기의 추진 기관용 가스 터빈 엔진은 대기중에 부유되어 있는 각종 입자들의 영향을 받게 된다. 특히, 확산 지역을 통과하는 항공기나 먼지 입자 부유물이 많은 공업지대 또는 사막지역을 비행하는 항공기의 경우는 모래 알갱이, 먼지 및 연소 입자의 직접적인 영향을 받아 각 요소들에 심각한 부식 및 마모가 발생됨으로써 성능 저하 및 냉각 통로의 막힘, 압축기와 터빈 날개의 손상 등이 예측되어진다. 특히 항공기용 추진 기관은 엔진 입구에 유입 공기를 정화하기 위한 여과장치의 설치가 불가능하며, 자동차용 가스터빈 엔진의 경우는 여과 장치를 부착하여도 미세한 입자들이 여과 장치에 여과되지 않고 엔진 내부로 침투하게 되므로 치명적인 손상이 예상된다. 이러한 손상들은 초기에는 미세하게 발생하지만, 손상 정도가 점점 누적됨에 따라서 항공기의 안전 운전에 심각한 위험 요소로서 작용할 수 있으며, 경제적으로도 기관의 유지 보수비용의 증가를 가져올 수 있다. 따라서 압축기에 화산재 또는 대기중에 부유되어 있는 금속 입자나 먼지입자 등이 유입되었을 경우, 압축기 날개의 손상 부위와 정도를 예측하는 것이 필요하다. 따라서 본 연구에서는 Lagangian방법을 적용하여 압축기 날개위의 부유 입자 충돌 부위를 예측하고, 설계 시 이를 보완할 수 있는 기준을 제시하였다. 아울러 설계 입구각과 크게 벗어난 유동의 유입시에 발생되는 박리 현상과 이에 따른 입자의 유동 및 날개의 입자 접착 부위를 예측하였다. 본 연구에서는 여러 크기의 입자(다양한 Stokes 수)들을 주어진 속도에서 유선을 따라 압축기 입구에서 압축기 유로로 여러 위치에서 부유 시켜서 그 입자들의 궤적 및 충돌, 점착 위지를 고찰하고, 정량적인 충돌량을 해석하기 위하여 입자 충돌 계수를 정의하여 압축기 날개 표면의 충돌특성을 알아보았다. 이러한 예측을 통하여 압축기 날개 표면의 충돌 부위를 예측하고, 날개의 표면을 코팅하는 등 보호 개선책을 제시할 수 있고, 연소의 반응물 입자가 터빈 날개에 충돌하여 발생되는 날개 표면의 파손, 냉각 홀의 막임, 연소 입자의 점착 부위 등을 예측하여 보완책을 준비할 수 있도록 하였다.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.652-663
• /
• 2019

To identify daily and annual changes in outdoor airborne fungi, it is necessary to shorten the collection cycle and increase the number of measurements. In this study, measurements were performed by employing an air sampler and potato dextrose agar media on the rooftop of National Research Institute of Cultural Heritage during a period of one year (August 2018 to July 2019). The collection cycle spanned the twenty-four seasonal divisions and the collection time was 2 p.m. and 11 p.m.. Meteorological elements were collected at intervals of one hour. Furthermore, the concentration of airborne fungi was monitored and correlation analysis with meteorological elements was subsequently conducted. Obtained results indicate that the concentration of airborne fungi is found to be highest in November, autumn, night, followed by autumn, summer, winter, and spring. The concentration, type, and dominant species of airborne fungi can vary depending on factors such as rainfall, typhoons, and yellow dust (fine dust). The concentration of airborne fungi indicates a strong positive linear relationship between precipitation, number of precipitation days, and relative humidity. The concentration of airborne fungi was related to the period of increase of dead plants in terms of nutrition source, and to the high relative humidity conditions including rainfall in terms of meteorological elements.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.133-134
• /
• 2003

대기 중에 부유하고 있는 입자상 물질은 보통 입경에 따라 2.5$\mu\textrm{m}$ 이하의 미세입자와 2.5$\mu\textrm{m}$ 이상의 조대입자로 나눌 수 있다. 조대입자는 토양 및 해염, 꽃가루, 화산재 및 토양 먼지와 같이 자연발생원에서 주로 생성되며, 인체에 큰 영향을 미치지 않는다. 그러나 미세입자는 화석연료의 연소, 자동차의 배출가스 및 화학물질의 제조공정 등의 인위적 발생원에서 주로 방출되며, 또한 이들 1차 생성분진과는 달리 대기중에서 황산가스나 휘발성 유기화합물 둥이 응축과정을 거쳐 가스상에서 입자상으로 변환되어 생성된 2차 입자도 환경학적으로 매우 중요한 의미를 갖는다. (중략)

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.03a
• /
• pp.71-88
• /
• 2005

With biological organism brown pollutants layers are thickly formed on inner stone materials in Gyeongjuseokbinggo(Ice storage in Gyeongju). Some simples were taken from this layer and its chemical composition, mineral composition, salt and microstructures were analyzed. This study shows that the pollutants layer can be removed easily, because it attached softly in stone surface. But because of its serious weathering state the stone surface also can be removed during the removing process. The origins of brown layer are assumed to be the soil in the mound over the Seokbinggo and the coarse sandy soil in the entrance. For the preservation of the Seokbinggo Waterproof and replacement of the coarse sandy soil should take precedence over the remove works. Subsequently moistureproof works should be enforced.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.14-23
• /
• 1998

The present study investigates numerically particle laden flow through compressor cascade. In general, a lot of turbine engines are affected by various particles which are suspending in the atmosphere. Especially in the case of aircraft aviating in volcanic, industrial and desert region including many particles, each components of engine system are damaged severely. That damage modes are erosion of compressor binding and rotor path components, partial or total blockage of cooling passage and engine control system degradation.. Initial damages can not be serious but cumulation of damages influences on safety of aircraft control and economical maintenance cost of engine system can be increased. When dust, materials and volcanic particles in the atmosphere flow in the compressor, it is necessary to predict damaged and deposited region of compressor blades. To the various flow inlet angle, predictions of particles trajectory in compressor cascade by Lagrangian method are presented and impulses by impaction of particles at blade surface are calculated. By the definition of particle deposition efficiency, characteristics of particles impact are considered quantitatively. With these prediction and experimental data, erosion rates are predicted for two materials - ceramic, soft metal - on compressor blade surface. Improvements like coating of blade surface could be found, by above prediction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.117-123
• /
• 2022

Recently, due to COV ID-19, many people are spending most of their time indoors. So, there is a rising interest on the indoor air quality in the field of building construction. The main sources for the indoor air pollution are human indoors activity, building materials, living supplies and the polluted air from outdoor. The Korean government has designated 17 indoor air pollutants including fine dust, total airborne bacteria, fungi and carbon dioxide, etc.. Most people are always exposed to assorted bacteria and molds in our daily life, because indoor environment for human, moderate temperature are humidity, it is favourable to the growth of most of bacteria and fungi. Pine needles have an antibacterial effect against bacteria and fungi. In this study, the antibacterial activity against bacteria and fungi was tested by cement matrix using pine needle extract. As a result, the cement matrix using pine needle extract showed antibacterial activities against bacteria, but in the case of fungi, it did not show antifungal activity.