• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.491-501
• /
• 2011

We performed numerical simulation using a DPM (discrete phase model) to identify the optimal operation ranges in two representative PM burners widely used in domestic 500-MW pulverized coal-fired power plants. Recently there has been an increased utilization of low-cost coals such as sub-bituminous coal. We investigate the effects of coal blends on the distribution ratio of coal to air by varying the mass flow rates of pulverized coal and primary air and the particle size. We present and discuss optimal conditions for the distribution ratio of coal to air in PM burners.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1111-1118
• /
• 2010

Combustion measurements based on optical techniques have recently become of major interest as tools not only for clarifying the combustion mechanism but also for validating the computational results for the combustion fields. In this study, the particle behavior in turbulent pulverized coal flame are investigated using advanced optical diagnostics. A laboratory-scale pulverized coal combustion burner is specially fabricated as open type in order to apply various optical measurement techniques. The detailed particle behavior is performed by LDV (laser Doppler velocimetry) and SDPA (shadow Doppler particle analyzer). It is observed that the particle mean diameter increase as the distance from burner increases, and this is found to be caused by the decrease of small particles' diameter and increase of large particles' diameter. This is because of result in the char reaction and the particle swelling due to devolatilization, respectively. The size-classified streamwise velocities of pulverized coal particles in the central region of the jet show the same magnitude, whereas those in the outer region are different depending on the particle size. The results show that the velocity and size-classified diameter of the pulverized coal particles in the flame can be measured well by SDPA.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.293-298
• /
• 2000

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.548-555
• /
• 2017

This study investigated the influence of air staging on combustion and NOx emission in a tangential-firing boiler at a 560 MWe capacity. For air staging, the stoichiometric ratio (SR) for the burner zone was varied from 0.995 to 0.94 while the overall value was fixed at 1.2. The temperature and heat flux in the burner zone and upper furnace corresponded to the distribution of SR, while the total boiler efficiency remained similar. The NOx emission at the furnace exit was reduced by up to 20% when the SR in the burner zone decreased to 0.94. However, the amount of unburned carbon and slagging propensity was not noticeably influenced by the changes in the SR of the burner zone. Therefore, it was favorable to lower the SR of the burner zone for reduction of NOx emission.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.71.1-71.1
• /
• 2011

석석탄가스화 기술은 고온, 고압 조건에서 미분탄과 산소의 가스화 반응에 의해 CO와 $H_2$가 주성분인 합성가스를 제조하는 기술로서 차세대 화력발전 뿐만아니라 다양한 화학원료 제조를 위한 분야에서 각광을 받고 있다. 또한, 가스화 기술은 향후 CCS기술, CTL(Coal To Liquid, 석탄액화)기술, SNG(Synthetic Natural Gas, 합성천연가스)생산, 수소생산, 각종 화학원료 생산 등과 연계가 가능한 미래 석탄이용 분야의 핵심 기술이라 할 수 있다. 따라서, 고등기술연구원에서는 이러한 석탄가스화를 통해 양질의 합성가스를 제조하기 위한 기술 개발의 일환으로 pilot급 고온, 고압 건식 분류층 가스화기, 기류수송 방식의 미분탄공급장치, 수냉자켓 구조의 합성가스 냉각장치, 합성가스 중 분진제거를 위한 금속필터 장착 집진장치 등을 연계하여 20기압의 고압 조건에서 장시간 연속운전을 진행하였다. 본 연구에서는 미분탄 공급을 위하여 상부공급 버너를 적용하였고 석탄가스화기는 $1,300{\sim}1,350^{\circ}C$ 정도의 온도에서 운전을 진행하였으며 미분탄을 75 kg/h의 조건에서 연속적으로 공급하였다. 그리고, 이러한 조건에서 5.5일 정도의 연속운전을 진행하는 동안 CO 44~48%, $H_2$ 20~21%, $CO_2$ 4~5% 조성의 석탄 합성가스를 $200Nm^3/h$ 안정적으로 제조할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.78.1-78.1
• /
• 2011

분포지역과 매장량이 한정되어 있는 석유에 비하여 석탄은 가채년수가 길고 세계 전역에 널리 분포되어 있으므로 향후 안정적인 에너지 공급으로 각광받고 있다. 석탄을 이용하여 CWM을 제조하는 기술은 석유에 비하여 저장, 수송, 분진 비산등의 문제점을 개선하여 위하여 1980년대부터 석탄 물 혼 합연료(Coal-Water Mixture)의 기술개발을 위한 연구가 진행되었다. 이는 미분탄(유연탄)에 30%정도의 물과 약간의 첨가제를 혼합하여 유체화하여 수송성은 액체연료와 같고 연소성은 석탄의 성상을 갖는 특징을 가지게 된다. 본 연구에서는 당센터에서 보유하고 있는 습식 분류층 가스화장치에 적용하기 위한 CWM(Coal Water Mixture)제조 특성을 연구하였다. 습식 석탄 가스화기에 사용되는 CWM은 미분되어진 석탄과 물, 첨가제를 일정비율로 혼합하여 사용하게 된다. 이때 공급되어지는 미분의 입도와 분쇄 형태에 따른 입자 형태, 입자의 분포에 따라서 CWM의 특성이 각각 다르게 나타나게 된다. 이때 만들어진 CWM의 농도와 점도 특성에 따라서 버너의 성능 및 가스화기 운전 조건등에 많은 영향을 미치게 된다. 습식 석탄 가스화에 적용된 예정인 대상탄을 대상으로 하여 석탄분쇄 형태에 따른 CWM의 제조 특성을 실험하였다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.102-105
• /
• 2001

Numerical simulations of coal combustion were carried out to identify what kind of burner design parameters are affecting the NOx emission. Where used burner design parameters are primary air velocity, secondary air velocity, $2^{nd}/3^{rd}$ air ratio, tertiary air velocity, and tertiary air injection location. Taguchi method was used to find the effective burner design parameters related to NOx formation. The results of numerical simulations showed that secondary air velocity and $2^{nd}/3^{rd}$ air ratio was the key parameters reducing the NOx emission. The total number of simulation cases was reduced by Taguchi method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.270-279
• /
• 2000

Recently, according to increase in the requirement of electric power, a thermoelectric power plant equipped with pulverized coal combustion system is highly valued, because coal has abundant deposits and a low price compared with others. For efficient use of coal fuel, most of plant makers are studying to improve combustion performance and flame stability, and reduce pollutants emission. One of these studies is how to control the profile of particle injection and velocity dependant on coal nozzle configuration. Basically, nozzle which has mixed flow of gas and particle is required to have the balanced coal concentration at exit, but it is very difficult to obtain that by itself without help of other device. In this study, coal distribution and pressure drop in gas-solid flow are calculated by numerical method in nozzle with various shapes of venturi diffuser as a means to get even coal particle distribution. The tentative correlations of pressure drop and exit coal distribution are deduced as function of the height, length and reducing angle of venturi from the calculated results. When coal hurner nozzle is designed, these equations are very useful to optimize the shape of venturi which minimize uneven particle distribution and pressure drop within coal nozzle.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1065-1073
• /
• 2006

The unturned carbon in fly ash, recently occurred in the coal-fired Yong Hung power station, caused some problems in ash utilization and boiler efficiency. This paper describes the analysis of unburned carbon and six coals, some tests performed at Yong Hung Boiler, and the results of combustion modification for the reduction of unburned carbon in fly ash. From the physical and chemical analysis of unburned carbon in fly ash, most particles were turned out to be hollow cenosphere and agglomerated soot particles. The sooting potential from six coals used in the plant were investigated with CPD(Chemical Percolation Devolatilization) model. The results showed that the higher potential was presented to Peabody, Arthur, Shenhua coals rather than other coals. It was necessary to measure the coal flow rates at each coal feeding pipe for four burner levels since they affect the extent of mixing of soot with oxidant, in turn, the oxidation rate of soot particles. The unbalance in coal flow rate was found in several coal pipes. We successfully reduced unturned carbon in ash by increasing the excess air and changing the SOFA's yaw angle.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1751-1755
• /
• 2004

Increasing environmental pressures to reduce NOx emission are being placed on coal-fired boilers. To meet the environmental requirements, Doosan Heavy Industries & Construction Co., Ltd.(Doosan) has developed low NOx pulverized coal burner. Low NOx pulverized coal burner has already delivered, and it's combustion performance was evaluated to the NOx and Unburned Carbon(UBC) during the commissioning tests. The test results are shown that the strong relationship is existed between NOx and OFA flow rate, and also fuel-N fraction of coal has effected on NOx emission.