• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.133-139
• /
• 2005

베이즈 법칙에서는 사전확률과 우도가 주어지고 어떤 실험결과가 일어났을 때 사후확률을 계산한다. 이러한 사후확률의 계산 문제를 미니탭 매크로를 이용하여 쉽게 계산할 수 있다. 또한 일련의 독립적이고 연속적인 실험결과에 따르는 사후확률도 편리하게 계산할 수 있다. 최근에는 미니탭 한글 Release 14가 출시되어 한글로 결과를 나타낼 수 있도록 매크로를 작성할 수 있다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2004년도 학술발표논문집
• /
• pp.227-228
• /
• 2004

최근에 베이지안 통계학은 경제 경영 그리고 의학 뿐 만 아니라 공학 등의 많은 분야에서 그 응용의 정도가 급속히 증가하는 추세이다. 그러나 베이지안 추론 또는 법칙들이 이론적으로 간단하지만 많은 경우 계산상에 어려움 때문에 실제 적용에 어려움이 있다 이러한 상황을 극복하기 위해 간단한 통계 패키지 프로그램인 미니텝을 이용한 여러 가지 적용 방법을 알아본다. 또한 미니탭 매크로의 사용을 원활히 적용함으로써 보다 발전적으로 베이지안 통계 계산을 용이하게 할 수 있다

• 한국산업정보학회논문지
• /
• 제16권5호
• /
• pp.107-114
• /
• 2011

신제품 개발 또는 개선 과정에 있어서 내구 수명의 평가는 장기간이 소요되는 작업으로서, 제품의 개발 또는 개선 기간에 큰 영향을 미치게 된다. 따라서 고장 메커니즘을 분석하여 제품의 신뢰성을 정확히 평가하는 것은 제품의 초기 시장 진입 기간을 단축하여 시장 경쟁력을 강화하는데 중요한 요소로 작용하게 된다. 본 논문에서는 트랙터의 무상보증기간에 이루어진 고장 데이터에 근거하여 주요 고장 부품에 대한 고장 메커니즘 분석을 통하여 고장형태를 규명하고, 신뢰성 분석을 통하여 파워트레인에 대한 B10 수명을 향상시키기 위한 대상 부품을 규명하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.316-316
• /
• 2012

본 연구에서는 Si wafer에 마스크 공정 및 Slit-etching 공정을 적용하여 25 um 피치의 probe unit을 개발하기 위해 Deep Si Etching 장비를 이용하여 식각공정 조건에 따른 특성을 평가하였다. 25 um pitch는 etch 폭의 크기에 따라 3종류로 설계하였으며, 식각공정은 2수준, 4인자 실험계획법에 의해 8회 실험을 수행하였다. 실험계획법에 의해 미니탭을 활용하여 최적조건을 구한 결과 12.5 um etch 폭에서는 가스유량은 200 sccm, 에칭시간 7 sec, 코일 파워 1500W, 에칭 압력은 43.7 mtorr의 조건이 etch 형태 및 profile angle이 목표치에 근접한 결과를 얻었다. 또한 probe pitch를 30~60 um까지 증가시켰을 경우 Etch depth는 증가하였으며, 식각율 또한 증가한 현상을 보였다. 재현성 실험을 위해 위의 최적조건을 이용하여 2회 반복하여 실험한 경우 모든 시편이 목표치에 도달하였다. 이는 미세피치화 되는 프로브 유닛의 기초데이터로 활용될 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.751-755
• /
• 2007

The purpose of this study is to find the optimization processing on expanded tube using Taguchi method which was generally used to analyze the effects of various control factors. Mini-Tab is a good for program that is making a selection using Taguchi method. The results of experimental test and analysis are as follows. Optimization processing on a expanded tube is dependent on lubrication condition. The slight eccentricity of expanded tube was obtained a good results on the expanded tube. When expending processing on the expanded tube was performed, the test specimens were almost unaffected by changing pressure loading. The tendencies of test results were related to lubrication condition and eccentricity in expending processing. As a result, a proper lubrication condition and eccentricity in the step of design will improve the optimization processing of expanded tube.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.144-149
• /
• 2008

This study presents the selection of cutting conditions in high speed pipe cutting machine for the better quality. A high speed pipe cutting machine which uses a rotary knife can make good quality products in short time. But, the machine is much sensitive by cutting conditions because of the complicated mechanism. In this reason, many experiments for cutting condition selection are necessary to improve quality of production. This study carried out cutting experiments with the three factors that are cutting RPM, cutting force and pooling force. 2-dimensional profile measuring instrument is used to measure which is represented by ${\Delta}h$, a sum of burr and collapse height. The effects of factors are analyzed by using MINITAB, the commercial software.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.582-588
• /
• 2010

This paper presents the Application of Response Surface Method for Optimal Transfer Conditions of MLCC Alignment System. his paper is composed of two parts: (1) Testing performance verification of MLCC alignment system, compared with manual operation; (2) Applying response surface method to figuring out the optimal transfer conditions of MLCC transfer system. Based on the successfully developed MLCC alignment system, the optimal transfer conditions have been explored by using RSM. The simulations using $ADAMS^{(R)}$ has been performed according to the cube model of CCD. By using $MiniTAB^{(R)}$, we have established the model of response surface based on the simulation results. The optimal conditions resulted from the response optimization tool of $MiniTAB^{(R)}$ has been verified by being assigned to the prototype of MLCC alignment system.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.27-33
• /
• 2014

To well design the solar energy system using solar energy, the correlation to calculate solar irradiation is basically needed. So, this study was performed to reveal the relationships between the solar irradiation and four meteorological observation data(dry bulb temperature, relative humidity, sunshine duration, and cloud cover) which are different from previous other researches. And then, we finally proposed the first order non-linear correlation from the measured solar irradiation using four meteorological observation data with MINITAB. To show the deviation of the solar irradiation between measured and calculated, this study compared using the daily total solar irradiance and the maximum peak value. From those results, the calculation error was estimated about maximum 25.4% for the daily total solar irradiance. The error of the solar irradiation between measured and calculated was made from the curve fitting error. So, solar irradiation prediction correlation with higher accuracy can be obtained using 2nd or higher order terms with four meteorological observation data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.483-488
• /
• 2013

The psychoacoustic quality of ABS is now considered more important than before as the focus of recent ABS function is expanded to basic function from typical emergency function. Thus, the automotive parts manufacturing companies are actively working to improve NVH (Noise, Vibration, and Harshness) in ABS module. In terms of time, test place, and cost, however, it is very inefficient to have all the operating noise validation test in real vehicle configuration especially for partially improved ABS module. To contribute to reducing the development period and to grasping the improvements faster, this research presents the study of a correlation to predict ABS operating noise inside vehicle via HILS rig test. The regression equation in this paper was statistically drawn from using Minitab S/W, and based on that equation, the noise spectrum of vehicle interior was analogized.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.