• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1159-1169
• /
• 2003

This paper investigates the effects of T-stress and plastic hardening mismatch on the interfacial crack-tip stress field via finite element analyses. Plane strain elastic-plastic crack-tip fields are modeled with both MBL formulation and a full SEC specimen under pure bending. Modified Prandtl slip line fields illustrate the effects of T-stress on crack-tip constraint in homogeneous material. Compressive T-stress substantially reduces the interfacial crack-tip constraint, but increases the J-contribution by lower hardening material, J$\_$L/. For bimaterials with two elastic-plastic materials, increasing plastic hardening mismatch increases both crack-tip stress constraint in the lower hardening material and J$\_$L/. The fracture toughness for bimaterial joints would consequently be much lower than that of lower hardening homogeneous material. The implication of unbalanced J-integral in bimaterials is also discussed.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.109-117
• /
• 1993

Force balance method is employed to predict forging information such as forging load, tool pressure and normal stress at the surface of tangential velocity discontinuity. The incipient stages of deformation for the plane strain forging of rectangular billets in V-shaped dies of different semi-angles are analysed. To construct an approximate model for the analysis of deformation by the force balance method in the incipient deformation stages, slip-line field is used. When the deformation mode by slip-line method is the same as that by force balance method, the slip-line method and the force balance method give identical solutions. The effects of die angle, coefficient of friction, billet geometries and deforma- tion characteristics are also investigated. In order to verify the validity of force balance analysis, the rigid-plastic finite element simulation for the various forgig parameters are performed and performed and find to be in good agreement.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3094-3104
• /
• 1993

The five punch and die sets are selected as the examples of arbitrary cross sections which have two opposite inclined sides. Two kinds of blank shapes are designed for all cross sections. One(h-b1.) is determined by slip-line theory and the other (G-b1.) is determined conventionally as the similar shapes with the cross sections which were used by Gopinathan. As a result of the experimental procedures, the superiority of the blank shapes designed by slip-line theory is verified in the limiting drawing ratio, the uniformity of cup height and the thickness distributions.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1471-1478
• /
• 2010

미세성형 공정은 마이크로 크기의 부품 생산에 있어 다양한 재료의 활용, 높은 생산성, 적은 재료의 손실, 고품질 생산을 실현할 수 있는 방법으로 최근 산업계와 학계의 많은 주목을 받고 있다. 하지만 매크로 성형에서 마찰거동을 묘사하기 위한 기존의 모델들은 미세성형에서 많은 오차를 유발하는 것으로 알려져 있다. 따라서 미세성형 공정의 성공적인 개발과 실용화를 위해서는 마찰거동의 크기효과에 대한 심도 있는 연구가 필요하다. 본 연구에서는 다양한 크기의 알루미늄 및 황동 재료를 대상으로 링 압축시험을 실시하여 소재의 크기에 대한 마찰거동의 크기효과를 고찰하였다. 유한요소해석을 이용하여 링 압축 시 접촉면의 마찰력이 링 시편의 변형특성에 미치는 영향을 정량적으로 분석하였다. 또한 미끄럼선장 모델링과 상계해석을 응용한 마찰모델을 활용하여 미세성형에서의 마찰거동 특성을 이론적으로 설명하였다.

• 한국자동차공학회논문집
• /
• 제2권1호
• /
• pp.84-95
• /
• 1994

The effects of punch and blank shapes in the rectangular cup drawing process are examined experimentally to improve the formabilities. For this purpose, three blank shapes which are h-bl., G-bl., and T-bl., and five punch shape factors which are the ratios of two adjacent side lengths in rectangular cross section are adopted. The constructing methods of the three blank shapes are as follows. The h-bl. is designed by slip-line theory, and the G-bl. is selected for the similar shape to the punch. The T-bl. is obtained by the drawing method which is introduced in the technical references. The five punch shape factors are selected for length/width=1, 1.25, 1.5, 1.75 and 2. The experimental procedures are performed for all the above forming conditions to investigate and compare the formabilities. As a result, it is verified experimentally that the rectangular cups drawn by the h-bl. are more ideal than those drawn by G-bl. and T-bl.. They have not only higher limiting drawing ratio, more uniformity in drawn cup heights and more ideal thickness distributions, but also need relatively less maximum drawing forces.