• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1393-1397
• /
• 2005

홍수유출을 저감시키기 위해서 유역의 저류기능을 강화시킬 수 있는 댐 건설은 이수적인 측면에서 안정적인 용수공급을 보장해주는 수단으로 겸용되어 왔으며, 특히 다목적댐이 건설되면서 하도의 첨두홍수유출량을 줄이는데 크게 기여해 왔다. 하지만 그로 인해 물의 흐름이 막히는 정체수역이 증가하고 있으며, 생활오수, 산업폐수의 발생은 정체수역에서의 영양염류 부하량을 증가시켜 부영양화를 초래하고 있다. 수생식물은 태양빛을 받아 광합성 작용을 하여 수중에서 성장하면서 수중의 유$\cdot$무기물질을 영양소로 섭취함으로써 수질을 정화시키는 작용을 하게 된다. 영양염류 부하량이 큰 정체수역의 오염된 물은 식물의 성장활동에 의해서 어느 정도 정화시킬 수 있으며, 이와 같이 수중에 식물을 식재하기 위해서는 식물이 하상에 쉽게 그리고 지속적으로 성장하고 번식활동을 할 수 있는 여건이 필요하다. 따라서 본 연구에서는 Mattress/Filter를 정체수역에 설치함으로써 이러한 식물의 성장과 번식을 도와줄 수 있는 환경조건을 제안하였다. 연구결과, Mattress에 식재한 갈대, 줄 및 애기부들의 피도는 $60-80\%$ 정도로 나타났다. 각 Mattress의 식물군집에는 초기 식재한 식물의 우점도가 가장 높았으나 갈대와 줄 군락의 경우 다른 종이 많이 출현하는 것으로 나타났다. 갈대 군락에서는 갈대가 크게 우점하였으나 그 외에 돌피, 하늘지기, 여뀌바늘 등이 우점하는 것으로 나타났다. 또한 줄 군락에서는 역시 줄이 크게 우점하였으나 방동사니, 돌피, 조개풀 등이 출현하였다. 애기부들 군락에서는 애기부들외에 세모고랭이와 미국가막사리 두가지 종만 출현한 것으로 나타났다. 갈대와 줄 군락의 출현 종수는 각각 7과 11이었으며, 다양도지수가 1.67, 2.18로 식물다양성이 크게 증가한 것으로 나타났다. 수질은 BOD 10mg/L, TN 15mg/L, TP 2.0mg/L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.1047-1055
• /
• 2019

Various types of numerical modeling techniques are used to predict the behavior of pollutants under various water environmental conditions in the event of a water pollutant accident. Among them, a hydraulic model that can consider water flow characteristics is the most basic and very important. The process of evaluating whether the hydraulic model accurately predicts the applied river characteristics is very important. In the verification of the modeling result, the measuring data are often used in the river. Currently, ADCP and FlowTrackers are widely used to measure the flow velocity of rivers. However, ADCP is not accurate when the depth is less than 0.6 m and also when the ratio of irreversibility near the surface is more than 40%. Futhermore, FlowTracker has a limitation in measuring at high depth and high velocity due to the direct measurement method in rivers. Simuation results, which are validated by these methods, are not reliable for low depth conditions of low flowrate and high velocity conditions of high flowrate. In this study, Lagrangian GPS floaters which measures physical quantity of water according to particle movement is used without the conventional method measured by Eulerian technique. The verification method of the model results was studied by comparing the simulation results of the hydraulic model with the velocities measured using the GPS floaters. When comparing the traveling distance of the GPS floaters with the traveling distance of the LPT simulations, the average error rate was 13.6% on distances, and the average error rate was 3.2% on velocities except for the stagnant section. Therefore, GPS floaters can be used for a correction and verification method of hydraulic model simulations.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.93-99
• /
• 2006

Primary productivity was determined by using $^{13}C$ tracer according to different cell size of phytoplank-ton through in situ incubation experiments in upper stream of the Lake Shihwa. The average concentration of chlorophyll a was 14 ${\mu}g\;L^{-1}$ demonstrating an eutrophic water. The ratio of POC/Chl-a was lower than 30, reflecting that the origin of organic matter might be mainly phytoplankton. The primary productivity was 93.9 mgC m^{-2}\;d^{-1}$ at St. 1, which was about 40-fold lower than the average value of the lake (3,972 mgC m^{-2}\;d^{-1}$) determined by Choi et al. (1997) before opening of gate but it was higher than the average primary productivity (3.98 mgC m^{-2}\;d^{-1}$) reported by KOWACO in 1993 before constructing dam. The fractionated size (20 ${\sim}$ 53 ${\mu}m$) of phytoplankton community account for 51% of total primary productivity, indicating the highest assimilation rate. This study suggest that $^{13}C$ tracer methodology should be applied as a useful approach for the water ecological research in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.541-547
• /
• 2017

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan Newport including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. Contaminants are accumulated from the sediment release. In this study, before and after dredging the sediment release test was performed. As a result, after the sediment dredging is performed, the reduction rate was higher at the same point. The results show that the water quality can be improved by dredging. Each group (A~C) reduction rate of the evaluation of the reduction rate of 4.64% T-N, 18.00%, 18.59%, respectively. T-P rate of 24.75% reduction, 24.17%, 44.08%, respectively. COD reduction rate was 18.57%, 19.76%, 38.08%, respectively. These results can be used as basic data for controlling the contamination by dredging in Yongwon channel.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.282-287
• /
• 2017

The purpose of this study was predicted the effects of mixing and diffusion due to the operation of the apparatus before the development of the mixed diffusion device for the decontamination absorbent to minimize the influence of contaminant inflow due to radiation accident. The tracer used for the flow characteristics was $^{68}Ga$, $^{99m}Tc$, which is a radioactive isotope, and 2 inch NaI radiation detector was used to detect it. The impeller of the decontamination mixed diffusion system applied to this study was made into three types and the mixing diffusion effect was compared. As a result of analyzing the flow characteristics of the radio-isotope with decontamination mixed diffusion device, mixing, diffusion and flow pattern were obtained. The radial mixing type impeller was able to diffuse to the water surface by the upflow flow, and the fin structure was adjusted for finding optimal conditions. The model 3 type consists of a fin guiding part and an auxiliary fin so that the diffusion speed is higher than that of other types of impellers. It also showed a short time to reach complete mixing.

• Journal of the Korean association of regional geographers
• /
• v.1 no.1
• /
• pp.23-43
• /
• 1995

This paper is the first part of a research which looks into the regional development process and the quality of life of Youngnam area, and which suggests a prospect and tasks for the future development of the region. Youngnam region has grown rapidly on the basis of labor-intensive light industries and standardized Fordist lage-scale heavy industries through the industrialization and urbanization of South Korea from the 1960s; but recently it has shown a relatively downward trend. The recent economic stagnation of Youngnam region can be seen as a result of uneven regional development in the national scale, which has brought out the increasing subcontracting relation within the region, the geographically excessive concentration of firms, the lack of growth potentiality of high-tech industries, the weakness of producer service, and the shortage of financial activities for capital flows. In addition, construction of physical and social infrastructures and management of urban central functions could not meet properly the rapid economic and urban growth of the region. Because of these problematics inherent in the economy of Yougnam region, the occupational status of regional dwellers is more or less unstable, and the wage level of employee as a whole in Youngnam region is lower than those of Seoul, although the wage level of labourers in manufacturing is relatively high. Moreover, the quality of life of dwellers in the region has some difficulties in the use of resources and ecological environment as well as the unequal provision of means of living and welfare facilities, even though it has been improved materially.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.715-725
• /
• 2013

FAMEs produced from vegetable oil via transesterification reaction were known as alternative fuels. Lubrication and Wear properties of FAMEs were investigated to confirm the alternative possibility as lubricating base oil. In this study, lubrication properties and physical characteristics of mixture oils were examined using blended FAMEs(soybean, palm, waste oils) in two kinds of lubricating base oils. The oxidation stability of mixed samples were analyzed using ASTM D 2272 method and investigated for oxidation states of mixture oils after the shell four ball test. The results showed that the increase of FAMEs contents improved lubrication due to the intrinsic characteristics, however, increased the contents of oxidation which deteriorate the lubrication, and we found optimum mixture ratio as results of each base biodiesel (FAME).

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1088-1095
• /
• 2019

The CKD extract is wastewater from which KCl in CKD has been removed to reuse CKD as a cement raw material, and tried to reuse no extracts due to problems such as wastewater treatment facility expansion. As a result of removing KCl by the ion exchange method, the pH of the extract after ion exchange decreased from 12.7 to less than pH 2, and it was confirmed that H⁺ of the cation exchange resin was dissolved in the extract through ion exchange. In addition, the selectivity of the ion exchange was removed in the order of Ca²⁺, K⁺, it was determined that the increase in the contact time to remove the K⁺ ions. The batch system had a contact time of 6 times or more, compared to the continuous system, and showed 4 times of K⁺ removal efficiency and 7 times of Cl^- removal efficiency. It was showed by analyzing the pH of the extract that more H⁺ of the cation exchange resin was extracted than OH^- of anion exchange resin as the pH of the extract was changed.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.97-105
• /
• 2008

Nitrogen budgets in Korea in 2005 were estimated using a mass balance approach. Major nitrogen fluxes were divided into three sections: cities, agricultural area, and forest. Nitrogen inputs were chemical and biological fixation, dry and wet deposition, imported food and feed, while crop uptake, volatilization, denitrification, leaching, runoff, and forest consumption were nitrogen outputs. Non-point source(NPS) pollution budgets were also estimated by mass balance approach. Annual total nitrogen inputs budgets were 1,442,254 ton$\cdot$yr$^{-1}$, and outputs were 814,415 ton$\cdot$yr$^{-1}$. Approximately 19.4% of nitrogen input leaked to river and seawater as NPS pollution. It contains nitrogen input 21 percent more than the previous research in 2002. Especially the change of government plans affect nitrogen budget. As a result, in the output field, the whole nitrogen amount due to landfill reduce from 20 percent to less than 1 percent.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.320-331
• /
• 2016

Linze-Donawitz gas (LDG) adjunctively produced in the steel mill contains over 60% of CO. Two processes that recover high purity CO from LDG were considered: COSORB and CO-Pressure swing adsorption (PSA). This study aimed to decide which one is more economically feasible than the other by techno-economic analysis (TEA). From the technical point of view of TEA, the process flow diagram (PFD) was constructed, the mass and energy balances were calculated, and the equipment type and size were determined in order to estimate the total capital investment (TCI) and the total production cost (TPC). From the economic point of view of TEA, economic performance such as return on investment (ROI) and payback period (PBP) was evaluated, and the sensitivity analysis was carried out to identify key factors influencing ROI and PBP. It was found that CO-PSA is more economically feasible due to higher ROI and lower PBP. The CO price highly influenced ROI and PBP.