• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.221-232
• /
• 2010

Purpose: It is necessary for dental technicians exposed to hazardous chemicals in the dental laboratories to be informed of the various harmful effects of chemicals for their health and safety. The purposes of this study was to investigate the actual condition of the use of MSDS in dental laboratories and the recognition rate of MSDS for dental technicians. Methods: 231 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 12.0. The answers to the questionnaire underwent frequency analysis, chi-square test and correlation analysis were performed to investigate association between health effects and recognition rate of chemical information. Results: The results from the effects of damage caused by chemicals 60.7%, and when it was less than 2 years working experience 47.6%. Currently any dental laboratories(rooms) was not furnished MSDS(0%) and even similar data furnishing rate was only 17.3%. Answer rate of 'Do not know about MSDS' was 73.6%. In addition to, education in the types and characteristics of chemicals(74.5%) does not receive all the higher education. For the question of 'To prevent human risks and accidents, is to provide chemical information needed', the answer rate of 'needed' was 87.2%. Moreover, the answer rate of 'To provide chemical information that could prevent accidents' was 76.6%. Therefore it was found that dental technicians need to be provided for chemical information. In addition, they wanted to get education related to chemicals used in the workplace(80.5%), and 90.9% was answered that they was willing to keep MSDS in they workplace. Conclusion: This study investigated the current dental laboratories(rooms) and the MSDS for the awareness and recognition of workers was very low, education was not being conducted properly. The dental laboratories(rooms) of the compact characteristics of the MSDS was not reasonably accessible and the furnishing location, dental laboratories(rooms) for the real item was needed for improvement. MSDS for dental technicians through education and promotion of information about chemicals and chemicals was to prevent health problems caused by the MSDS that will raise awareness of the necessity.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.545-551
• /
• 2012

Due to the use of polymeric materials in construction materials, the fire combustion gases that occur in the fire are various. The one of combustion gases, HBr is measured to evaluate the toxicity of the combustion gases in the FTP Code Part 2, Standard NES 713 and Standard BS 6853. According to the MSDS, Inhalation of HBr gas especially cause burn, respiratory dysfunction, headache, etc. The people who are exposed to 50ppm of HBr gas, very irritant gas may also frequently result in both immediate death and post-exposure deaths due to pulmonary complications. In this paper, we conduct a research on the combustion toxicity of HBr gas hazardous test which is motility measurement of the mice exposed to the HBr standard gas comparing the biological analysis result.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.209-216
• /
• 2016

Purpose: The purpose of this study is to discover the recognition of dental technicians on MSDS and to research the furnishing rate of Material Safety Data Sheet (MSDS) in dental laboratories. Method: 104 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 12.0. The answers to the questionnaire underwent frequency analysis, chi-square test were performed. Results: The result of cross analysis on the occurrence of occupational diseases according to whether MSDS is furnished showed that the group with MSDS furnished had 37.8% of damages due to their occupation, but the group with MSDS unfurnished had 65.7% of damages due to their occupation, which displayed a significant difference(p<0.05). The result of cross analysis on whether the education about chemicals according to whether MSDS is furnished showed there were relatively more responses of no education on the types and characteristics of chemicals, the effect on human body and its risk, emergency measure when exposed to risk, the treating and storing methods and the disposal methods. In addition, there were significant differences on whether all the above education was done between the group with MSDS furnished and the group without MSDS(p<0.000). Conclusion: In order to secure safe working environment of dental technicians and to reduce occurrence of damage caused by chemicals, the related education is necessary. The recognition of dental technicians on MSDS and furnishing rate is increasing but still insufficient, so the related organizations need to establish education and PR measures for prevention of damage.

• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.103-112
• /
• 2011

Aquatic contamination by organic pollutants has been a suspected reason for rapid decrease of amphibian populations whose embryonic and larval stages are in an aquatic environment. Amphibian embryos can be a useful model to study the ecoctoxicologial impacts of aquatic pollutants. The obtained toxicological data are useful references for the management of aquatic pollutants in public health because amphibia share many developmental events with terrestrial vertebrates including humans. Safety guidelines for the toxicological effects of aquatic contaminants of chemicals identified as hazardous should be addressed at multiple endpoints. Alkylphenols have been widely-used in agricultural, industrial, and household activities; they contaminate and can persist in aquatic environments. Exposure to alkylphenols results in endocrine disruption in aquatic animals. In this review, we summarize the developmental toxicities of alkylphenols in amphibian embryos and larva according to the exposure route, chemical concentration, duration of exposure, and affected developmental stage together with mechanisms of toxicity and typical patterns of developmental abnormality. The merits of amphibian embryos as a toxicity test model for mid- to long-term exposure to aquatic pollutants are discussed proposed.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.190-194
• /
• 2017

The combustion properties for the prevention of the fire and explosion in the work place are flash point, explosion limit, autoignition temperature (AIT) etc.. The using of the corrective combustion properties of the MSDS (Material Safety Data Sheet) of the handling substance for the chemical process safety is very important. For the safe handling of benzyl alcohol which is widely used in the chemical industry, the flash point and the AIT were measured. And, the lower explosion limit (LEL) of benzyl alcohol was calculated by using the lower flash point which obtained in the experiment. The flash points of benzyl alcohol by using the Setaflash and Pensky-Martens closed-cup testers measured $90^{\circ}C$ and $93^{\circ}C$, respectively. The flash points of benzyl alcohol by using the Tag and Cleveland open cup testers are measured $97^{\circ}C$ and $100^{\circ}C$. The experimental AIT of benzyl alcohol by ASTM 659E tester was measured as $408^{\circ}C$. The LEL of benzyl alcohol measured by Setaflash closed-cup apparatus was calculated as 1.17 vol% at $90^{\circ}C$. In this study, it was to possible predict the LEL by using the lower flash point of benzyl alcohol which measured by Setaflash closed-cup tester.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.373-379
• /
• 2022

The radiation source used for non-destructive testing have permeability and cause a scattered radiation through collisions of surrounding materials, which causes changes in the surrounding spatial dose. Therefore, this study attempted to evaluate and analyze the distribution of spatial dose by source in the working environment during the non-destructive test using monte carlo simulation. In this study, Using FLUKA, a simulation code, simulates ⁶⁰Co, ¹⁹²Ir, and ⁷⁵Se source used in non-destructive testing, The reliability of the source term was secured by comparing the calculated dose rate with the data of the Health and Physics Association. After that, a non-destructive test in the radiation safety facility(RT-room) was designed to evaluate the spatial dose according to the distance from the source. As a result of the spatial dose evaluation, ⁷⁵Se source showed the lowest dose distribution in the frontal position and ⁶⁰Co source showed a dose rate of about 15 times higher than that of ⁷⁵Se and about 2 times higher than that of ¹⁹²Ir. In addition, the spatial dose according to the distance tends to decrease according to the distance inverse square law as the distance from the source increases. Exceptionally, ⁶⁰Co, ¹⁹²Ir, and ⁷⁵Se sources confirmed a slight increase within 2 m of position. Based on the results of this study, it is believed that it will be used as supplementary data for safety management of workers in radiation safety facilities during non-destructive testing using radioactive isotopes.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.182-182
• /
• 2003

1.연구목적 : Cr $O_3$은 금속 도금용, 페인트 둥에 많이 사용되며 독성이 강하여 그동안 근로자 건강장해 및 직업병 사례가 많이 발생하였다. 그러나 산화크롬의 흡입에 의한 연구자료는 매우 부족하다. 이에 흡입챔버를 이용 Rats에 흡입노출을 통하여 유해성을 평가하고 각 장기에 흡수되는 크롬의 농도평가와 회복기간에 따라 각 장기별로 흡수된 크롬의 소실속도 둥을 연구하였으며 더불어 회복기간과 제거율의 상관관계 및 체내 반감기 등을 연구하였다. 2. 연구방법 : Cr $O_3$를 폐내 침착율 및 흡수율이 높은 0.5～5$\mu\textrm{m}$ 크기의 aerosol형태로 SD Rats 수컷에 전신폭로 하였다. 노출농도는 0.00, 0.20, 0.50, 1.25mg/㎥(Cr)으로 하여 1일 6시간, 주 5일, 13주간 반복 노출하였고 회복군은 시험물질 종료일을 기준으로 2주, 8주 경과 후 조직장기와 전혈, 혈장 및 적혈구내, 뇨 중 각각의 크롬농도를 분석하였으며 혈액 및 혈액 생화학적 검사도 병행하였다 3. 연구결과 : 혈액검사에서 0.20, 0.50 mg/㎥ 농도군 실험동물의 RBC와 HGB, HCT 둥은 감소의 경향을 보였으나 농도 의존적이지는 않았다. 신장의 절대중량은 대조군에 비해 유의하게 (p<0.05) 감소하고 폐장의 경우는 대조군에 비해 유의한(p<0.05) 절대중량 증가를 보였다 시험물질 노출 후 혈액 중 전혈, 혈장, 적혈구의 회복기간(x)별 크롬농도(y)의 소실속도 상관계수 (노출농도 0.50mg/㎥군의 경우)는 y = 66.51 $e^{0.057}$x/, y = 67.2 $e^{0.101}$x/, y = 70.01 $e^{0.030}$x/, 반감기는 12.0, 6.86, 23.0 일이고 폐장, 간장, 신장의 회복기간(x)별 크롬농도(y)의 소실속도 상관계수 (노출농도 0.50 mg/㎥군의 경우)는 y = 1808 $e^{0.004}$93x/, y = 12.02 $e^{0.029}$7x/, y = 67.61 $e^{0.029}$2x/ 반감기는 140.6, 23.3, 23.7 일로 평가되었다. 4. 고찰 : 실험동물의 전혈, 혈청, 뇨에서의 크롬농도와 시험물질 노출농도는 밀접한 상관을 가졌으나 농도에 정비례하지는 않았다. 뇨 중 흡수된 크롬의 경우 회복기간 초기 (12시간 내)에 대부분 배설이 일어나는 것으로 나타났다. 폐장이 간장, 신장 등 다른 장기에 비해 높은 축적량을 보였으며 축적된 크롬농도가 높을수록 크롬의 소실속도는 현저히 저하하는 경향을 보였다. 노출농도가 높을수록 각 장기조직 내 크롬의 소실속도 (clearance)는 크게 감소경향이 있었으며 이는 체내 과부하시 자정작용이 감소하는 것으로 판단되었다. 본 연구 결과 SD rat를 이용 반복흡입노출의 경우 생체의 무유해영향농도 (NOAEL)는 0.2mg/㎥이하이며 발암물질을 감안하여 안전계수를 100으로 할 경우 사람에 대한 NOAEL은 0.002mg/㎥이하로 판단되었다. 특히 호흡기와 폐장에 강한 유해성을 나타내는 것으로 확인되었다. 것으로 확인되었다.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.51-59
• /
• 2023

The Nakdong river is both a natural resource crucial to underwater ecosystems and a water source for its basin's residents. Industrial wastewater and domestic sewage must meet the relevant standards for discharged water before they can flow into the river. The correlation between old and new measures of organic matter was examined using water quality data from 50 monitoring locations in the main stream of the Nakdong river. The coefficient of determination (R²) for total organic carbon (TOC), the new measure of organic matter, and chemical oxygen demand (COD), the old measure of organic matter, in the main stream of the Nakdong river was 0.6134, indicating high correlation. Water quality at each location assessed using TOC and COD showed disparities that cannot be ignored: quality appeared higher when evaluating the main stream of the Nakdong river using TOC instead of COD. Therefore, there remains a need to review water quality ratings based on TOC; continuous monitoring of COD is also required. In addition, the cause of the difference should be clearly identified to help assess artificial sources of pollution and natural factors affecting organic matter. Water management of the Nakdong river will then be possible using the water quality rating.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.307-315
• /
• 2010

The safety and security of food supply should be one of the primary responsibilities of any government. Estimation of nation's food commodity intakes is important to control the potential risks in food systems since food hazards are often associated with quality and safety of food commodities. The food intake databases provided by Korea National Health and Nutrition Examination Survey (KNHANES) are good resources to estimate the demographic data of intakes of various food commodities. A limitation of the KNHANES databases, however, is that the food intakes surveyed are not based on commodities but ingredients and their mixtures. In this study, reasonable calculation strategies were applied to convert the food intakes of the ingredients mixtures from the KNHANES into food commodity intakes. For example, Perilla leaf consumed with meat, raw fish, and etc. in Korean diets was used to estimate its Korean intakes and develop algorithms for demographic analysis. Koreans have consumed raw, blanched, steamed, and canned perilla leaf products. The average daily intakes of the perilla leaf were analyzed demographically, for examples, the intakes by gender, age, and etc. The average daily intakes of total perilla leaf were 2.03${\pm}$0.27 g in 1998, 2.11${\pm}$0.26 g in 2001, 2.29${\pm}$0.27 g in 2005, 2.75${\pm}$0.35 g in 2007, and 2.27${\pm}$0.20 g in 2008. Generally, people equal to or over 20 years of age have shown higher perilla leaf intakes than people below 20. This study would be contributed to the estimation of intakes of possible chemical contaminants such as residual pesticides and subsequent analysis for their potential risk.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.314-323
• /
• 2006

This study was conducted to identify ingredients of thinners and to confirm reliability of material safety data sheets (MSDS) of thinners for public and workers' health. The 41 thinner products were collected from paint shops located in Busan and Gyeongnam province. The 12 thinner products among them were identified using product MSDS. GC-MSD was used to analyze 41 kinds of thinners qualitatively and quantitatively. The 12 products MSDS were compared with thinner's component through qualitative analysis to confirm MSDS. Chemical ingredients, such as Benzene, Toluene, and Xylene etc., of thinners were analysed in quantity. The 41 thinner products contained 17 disclosed specific, trade name, or generically described chemical solvent ingredients. These 17 ingredients came under 6 classes: alcohols, aromatic hydrocarbons, esters, glycol ethers, ketones, and mixtures. These 17 ingredients were important in the view of industrial hygiene and had occupational exposure limit in the ambient, such as toluene, xylene, acetone, nonane, EGEE, heptane, cumene, MIBK, indene, tri-methyl benzene, etc, were found in 41 kinds of thinners. Aromatic hydrocarbons were the most identified ingredient in thinners. Especially, the benzene, which induces leukemia, was found in 4 kinds of thinners. The content rates of benzene in thinners were 0.25~1.18%. The benzene in enamel thinner, which were 0.39~0.72%, was highest from chemical classification. The contents of toluene, which was found from 27 kinds of thinners, were 5.35~64.16%, which were highest in sobu thinner as 58.80%. Xylene was found from 22 kinds of thinners and contents of xylene were 4.61~72.42%. Acrylic thinner's contents of xylene were 12.06~51.05%, which was most high. It was found that contents of benzene were increased and frequency of detection was decreased through comparison with other study. The MSDS possession rate of paint shops was low as 29.27%. So it did not provide information with public or workers. Mean of agreement rate between MSDS and components of thinners through qualitative analysis was 42.01% and it has wide range from 8.3% to 75%. There are many deficiencies in MSDS about component of thinners. In some case of sample, expecially, despite containing benzene, information was not written it on MSDS.