• KSBB Journal
• /
• v.18 no.3
• /
• pp.234-238
• /
• 2003

Biofilm process is preferred to activated sludge process in small domestic wastewater treatment plant because of its simplicity in operation and maintenance. Column reactor filled with waste ceramics and with waste plastics was used to remove pollutants in restaurant wastewater. COD removal at 18 hours of hydraulic retention time (HRT) gave 93.7%, COD removal during the experimental period, where maximum COD removal was observed. Under same condition, average removal of total nitrogen and total phosphorus were 82.3% and 25.9%, respectively Organic and nitrogen were efficiently removed with the HRT of 18 hours or more.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

This study is a basic experimental research to apply FRP (Fiber Reinforced Polymer) box members to slabs and girders among various architectural structures, which receive bending stress. We prepared prefabricated FRP member and connected it to an FRP box member as a large cross section before we conducted an experiment in diverse conditions to analyze characteristics of compressive fracture behavior. In this study, we carried out a compressive fracture behavior test according to fillers on the upper part of the FRP box member, loading methods, and connective types and thereby performed a finite element analysis. The comparison of analysis results with test results revealed that rigidity was found to be slightly low, while stress was concentrated on the fracture point of the sample.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.201-209
• /
• 1998

Alumina powders used as a filler in rubber compounding was extracted from kaolin in $H_2SO_4$ solution employing conventional thermal and microwave energy resources. Maximum degrees of alumina extraction from kaolin were 72.8% at $80^{\circ}C$, 1M $H_2SO_4$, and 180min in the conventional thermal extraction process and were 99.0% at $90^{\circ}C$, 1M $H_2SO_4$,, and 60min in the microwave extraction one, respectively. The samples synthesized in both processes were analyzed by means of TG/DTA, XRD, SEM, Atomic Emission Spectroscopy, and BET method. Studies are presently under way to unravel the basic interaction mechanisms between microwave and alumina power for high rates of alumina extraction from kaolin in the microwave ex-traction process.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.327-331
• /
• 2001

Catechin compounds from the Green tea cultivated in Bosung (Chollanamdo) were extracted using supercritical fluid and various additives, and analyzed by reversed-phase high performance liquid chromatography (RP-HPLC). The chromatographic column was packed with LiChrospher 100RP-18(15 $\mu$m), and water was used as the mobile phase with 0.05% phosphoric acid and acetonitrile. Gradient election was applied to separate EGCG by changing the mobile phase compositions. Comparing the extraction yield of three different types of supercritical fluids, pure CO$_2$, with additives of water and ethanol (5 wt,%), the extraction amount of EGCG was most abundant in the suprcritical CO$_2$with ethanol. However, more was extracted and pure higher purity was achieved by solvent extraction using ethanol.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.372-377
• /
• 2007

In order to assess its capability as biofilter bed material under variable conditions of two parameters (inlet gas concentration and inlet gas flow rate), reticulated polyurethan was applied to remove hydrogen sulfide via a biological process. We detected a maximal elimination capacity (critical loading rate) of $488.3(330.1)g-H_2S/m^3{\cdot}hr$, when reticulated polyurethane was employed as supporting material of biofilter. This study show that the application of reticulated polyurethane carrier might be a favorable choice as a packing material in biofilter for the biological removal of hydrogen sulfide.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2004

The purpose of this study is to evaluate a laboratory test on arsenic reduction efficiency for ARD (Acid Rock Drainage) using limestone and apatite, and to design an apatite drain system. As a result of the laboratory test, results of this study show that pH, arsenic removal ratio, and dissolution amount of limestone ＆ apatite are inversely proportional to flow rates, and apatite removes 100％ of arsenic at 0.6 ml/min/kg flow rate. It is supposed that dissolution rate of apatite is ten times higher than that of limestone. The arsenic compounds are assumed to be Johnbaumnite, and/or Ca-arsenic hydrate. According to the results of the laboratory test, apatite drain system is designed as follow; Sixty two tons of apatite will be needed per one year and six months, and the precipitates will be removed from the precipitation pond per 3 months.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.545-555
• /
• 2000

Surface defects in injection molded parts due to the unsteady flow are related to the dimension of gate, operational conditions and rheological properties of polymer. In this study we have examined surface defects in injection molding for PC, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to not on]v die swell but retardation of die swell. Large die swell eliminates jetting however the large retardation of die swell stimulates jetting. Reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and surface defects. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.53-58
• /
• 1999

This study was carried out evaluate to identify water quality and contamination characteristics of the shallow groundwater. and their seasonal variation in the rual area of the Yongin city. Groundwater sample were collected two times (in April and September) from a total of 19 well for domestic water supply. and surface-water samples from six locations. For cations, Ca and Mg predominated. In anion competition. the influence of Cl was obvious in the april samples. However. HCO$_3$ was a major component in the september samples. Electric conductivities and the concentrations of NO$_3$-N in groundwater samples significantly decreased from the april samples to the september samples This indicates a significant seasonal variation in the shallow groundwater composition. When the shallow aquifer is connected to the surface water. then metals sorbed on the stream sediments could occur at nearby wells through the induced recharge. Contaminants at ground surface appeared to be transported to the groundwater system infiltration during the spring melt.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.41-44
• /
• 2008

The PCT that supports the walls of long span temporary shoring facility is previously manufactured in the way of prestressing, and it which is composed of concrete is improved precast structure to satisfy enough stiffness. The components of PCT are manufactured as a fixed form, and they are close to the inner side of the wall of temporary shoring facility by fixed means in PCT. PCT system as support structure is that the ends of concrete filled segment members are united by the means of connection and also they have connection hole. In this study, PCT has enough bearing power for the long span temporary shoring facility, and also make the term of work reduce due to that the time of curing reduce through the method of precast.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.475-482
• /
• 2007

The property and applicability of the organic-inorganic synthesized penetrating and reinforcing agent, which is developed in order to improve durability of concrete structures and prevent deterioration that may occur as service years increased, are researched with experimental works. TEOS (tetra-ethoxyorthosilicate) and acrylate monomer are synthesized by the solution polycondensation method in order to formulate silicate with sol-gel process and improve durability of concrete. Additional substances such as isobutyl-orthosilicate is supplemented in order to improve the performance of the agent. After the developed organic-inorganic penetrating reinforcing agent penetrates, a flexible impact alleviating layer is formed with organic monomers as well as the agent strengthens concrete by filling up the internal pore of concrete with stable compounds after penetration. Penetrating and reinforcing agent can be applied as an effective life management method because it makes concrete more durable against the aging factors, such as chloride ion, carbonation, freezing-thawing, and compound aging.