• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.129-139
• /
• 1999

Hydrothermal gold deposits of the Trabong district in Vietnam occur as single-stage quartz $\pm$ calcite veins (0.3-1.2 m thick) which fill fault fractures in graphite-bearing gneiss and schist of the Chulai Complex and Kham Duc Formation of the Proterozoic age. Ore grades are 1.3 to 92.4 g/ton Au. Ore mineralogy is very simple, consisting mainly of pyrite with minor amounts of base-metal sulfides and electrum. Gold grains occur in two assemblages as follows: (1) early, Fe-rich (7.2-10.4 mole % FeS) sphalerite + electrum (50.4-64.3 atom % Au) assemblage occurring as inclusions in pyrite; (2) late, Fe-poor «4.7 mole % FeS) sphalerite + galena + electrum (47.6-81.7 atom % Au) assemblage occurring along fractures of pyrites. Based on fluid inclusion data and thermochemical considerations of ore mineral assemblages, ore minerals were formed at high temperatures (about $230^{\circ}C$ to $420^{\circ}C$) from $H_{2}O-CO_{2}(-CH_{4})$-NaCI fluids with the sulfur fugacity of about $10^{-6}$ to $10^{-10}$ atm. Fluid inclusion data also indicate that ore mineralization occurred mainly as a result of fluid unmixing accompanying $CO_2$ effervescence. Calculated oxygen and measured hydrogen isotope compositions of mineralizing waters (${\delta}^{18}O_{V-SMOW}$ values = 5.3 to 8.6$\textperthousand$, ${\delta}D_{V-SMOW}$ values = - 60 to - 52$\textperthousand$), along with the sulfur isotope compositions of vein sulfides (${\delta}^{34}S_{CDR}$ values = - 1.2 to 2.8$\textperthousand$) and carbon isotope compositions of inclusion $CO_2$ (${\delta}^{13}C_{PDB}$ values = - 4.7 to - 2.0$\textperthousand$) indicate that the high temperature (mesohypothermal) gold mineralization formed from a magmatic fluid.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.55-63
• /
• 2020

This study investigates the mechanical properties and reaction products of activated slag pastes depending on gypsum presence and calcium carbonate addition in terms of compressive strength tests and synchrotron X-ray diffraction. The chemicals of CaO and NaOH are used as activators with different two dosages. The reaction of CaO-activated slag without gypsum just accelerated by addition of calcium carbonate at early ages, but no improvement was observed at later ages. On the other hand, the mechanical properties of CaO-activated slag pastes with gypsum were improved with calcium carbonate, enhancing the stability of ettringite. The variation of mechanical properties of NaOH-activated slag pastes was negligible depending on calcium carbonate addition in case of no gypsum. The addition of calcium carbonate into NaOH-activated slag pastes with gypsum deteriorated its mechanical properties due to the ion competition between CO₃^2- ions and SO₃^2- ions, decreasing crystallinity of reaction products.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.1-8
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the exhaust emission characteristics of homogeneous charge, stratified pattern and inhomogeneous charge under various conditions using gas chromatography. In the case of homogeneous charge condition, the $CO_2$ concentration is proportional to excess air ratio and overall charge pressure, the $CO_2$ concentration is proportional to excess air ratio and the UHC concentration is inversely proportional to ignition time and overall charge pressure. In the case of stratified pattern, the RI(rich injection) condition shows better exhaust emission characteristics, especially $CO_2$, than that of HI (homogeneous injection) or LI (lean injection) conditions. In inhomogeneous charge conditions, when initial charge pressure is increased, $CO_2$ and UHC concentration is reduced but $O_2$ concentration is increased. And when the excess air ratio of initial charge mixture is 3.0, UHC and $CO_2$concentration show lowest values.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.6
• /
• pp.379-383
• /
• 2015

Some insulating materials are organized and analyzed with variables to obtain the optimized profile of encapsulated three phase of epoxy barrier which is applied to gas compartment and supporting conductors for high voltage GIS (gas insulated switchgear). The high voltage GIS is used in electrical power system and operating reliability. In this paper, optimization possibility of barrier shape including both electrical insulation performance and mechanical strength, premised on that condition minimizing volume and light weight should be kept for high voltage GIS, could be achieved by analysis simulation. As a result, filling material which is lower permittivity such as $SiO_2$ instead of $Al_2O_3$ properly to the epoxy material, can be improved to increase the electrical insulation performance and mechanical strength for an optimized profile barrier of a high voltage GIS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.224-224
• /
• 2009

본 연구는 여러종류의 에폭시 나노콤포지트의 절연파괴 강도에 대한 와이블 특성을 연구하였다. 여러 종류 나노콤포지트는 나노입자 형상의 변화 즉, 층상실리케이트(Layered Silicate)와 구상 입자(SiO2)의 충진함량변화를 통한 절연파괴특성을 연구하였다. 나노+마이크로입자에대한 두 개의 체적비를 통한 멀티-나노복합물을 구현하였고, 그 절연파괴 특성의 결과와 기계적특성으로 굴곡강도특성을 Weibull Plot을 통하여 분석하였다. 순수한 나노콤포지트보다 멀티나노콤포지트가 기계적특성에서 월등하게 나타내었고, 절연파괴강도역시 형상파리미터가 대단히 큰 결과를 얻었다.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.42-52
• /
• 2001

The barks of Fraxinus rhynchophylla, Fraxinus sieboldiana and Fraxinus mandshurica, ash trees grown in domestic, were collected, extracted with acetone-H$_2$O(7:3, v/v) and freeze dried to give some dark brown powder. A portion of the freeze dried powder was chromatographed on a Sephadex LH-20 and a TSK 40F column using a series of aqueous methanol, ethanol and ethanol-hexane mixture as eluents Some spectrometric analyses such as NMR and FAB-MS including TLC were performed to identify the structures of the isolated compounds. The bark extractives contained a large amount of coumarin derivatives in addition to a small amount of ester compounds.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.220-223
• /
• 2001

본 연구에서는 endosulfan으로 오염된 토양을 in-situ flushing으로 정화시 발생되는 세척 유출수의 고정화 미생물에 의한 처리 효율 및 적용성을 검토하였다. 초기 endosulfan 농도 및 pH가 각각 5mg/L, 5.6인 세척유출수의 체류시간을 1, 3, 5시간으로 하여 고정화미생 물 충진 컬럼에 적용한 결과, 제거효율은 각각 62, 82, 89%로 체류시간이 증가될수록 향상되었으며 3가지 조건 모두 약 80시간 이후에 정상상태에 도달하였다. 체류시간 3시간에서 유입수내 endosulfan 농도를 50mg/L 및 100mg/L로 증가시킨 결과, 제거효율이 각각 70% 및 50% 부근까지 저하되었다. 유입수의 pH를 4.0과 9.0으로 변화시켜 실험한 결과 각각 73%와 66%의 제거효율을 나타내었다. pH 9.0보다 4.0에서 제거효율이 약간 높은 이유는 사용 배지의 pH가 약산성을 띠기 때문에 알칼리 상태보다 약산성에서 미생물의 활성이 높기 때문으로 판단된다. 유출수를 재순환 시킨 결과 제거효율이 90%까지 향상되는 것을 볼 수 있었으며, 이는 재 순환되는 유출수의 농도 저감 및 고정화 미생물과의 재 접촉에 기인하는 것으로 판단된다. 유입수에 공기를 주입한 결과, 유출수의 재순환 없이도 약 40시간 후에 93%의 제거효율을 보였으며 이는 미생물 활성의 증가에 기인하는 것으로 판단된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.157-158
• /
• 2006

A novel nanofabrication process has been developed using two-photon crosslinking (TPC) for the fabrication of three-dimensional (3D) SiCN ceramic microstructures applicable to high functional 3D devices, which can be used in harsh working environments requiring a high temperature, a resistance to chemical corrosion, as well as tribological properties. After sequential processes: TPC and pyrolysis, 3D ceramic microstructures are obtained. However, large shrinkage due to low-ceramic yield during the pyrolysis is a serious problem to be solved in the precise fabrication of 3D ceramic microstructures. In this work, silica nanoparticles were employed as a filler to reduce the amount of shrinkage. In particular, the ceramic microstructures containing 40 wt% silica nanoparticles exhibited relatively isotropic shrinkage owing to its sliding free from the substrate during pyrolysis.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.87-89
• /
• 1999

본 연구에서는 Sorfactant/Cosolvent 혼합용액을 적용한 Soil flushing 기법에 의해 농약(Endosulfan(6,7,8,9,10,10-Hexachlor-1,5,5a,6,9,9a-hexahydro-6,9-methane-2,3,4benzo (e)dioxathiepin-3-oxide))으로 오염된 토양의 정화효율을 알아보았으며, 회분식 및 연속식 실험을 통하여 최적의 운전조건을 도출하고자 하였다. 세척용액의 적정 사용조건을 알아보기 위한 회분식 실험은 Jar tester를 사용하여 진탕비 (토양 중량 : 세척용액 부피), Surfactant(SDS ＋ POE$_{5}$, POE$_{9}$ ＋ POE$_{14}$, POE$_{5}$ ＋ POE$_{14}$, POE$_{14}$)와 보조용매(water, ethanol, methanol, ethanol＋methanol)의 혼합비 및 농도 조건을 변화시켜가며 토양세척을 수행하였다. 세척용액은 보조용매에 Surfactant의 농도를 0.5%, 1%로 용해하여 적용하였다. 연속식 실험은 회분식 실험에서 얻어진 최적 세척용액 사용조건 즉, 계면활성제 SDS + POE$_{5}$(1:1, 용액농도 1%), 보조용매 ethanol을 일정 비율로 혼합한 세척용액을 오염된 토양이 충진된 유리칼럼에 여러 유량조건에서 1 - 20 pore volume까지 통과시켜 각 통과된 pore volume에서의 토양세척 효율을 알아보았다. 본 실험조건에서 얻어진 세척용액의 최적 통과 속도는 0.31 ㎤$cm^{-2}$$min^{-1}$ 이었으며, 세척온도의 증가에 따른 세척효율의 향상은 2$0^{\circ}C$이상에서 크게 둔화되었다. 또한 보조용매의 사용량을 줄이기 위해 에탄올을 물로 1:3까지 희석한 결과 세척효율에 큰 영향이 없음을 알 수 있었다.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.357-368
• /
• 1985

The Weolseong diatreme crops out about 28km south of Kyeongju City, Korea. The diatreme is a circular shaped volcanic vent, 1.2km in diameter, that formed subaerially, probably by phreatomagmatic (phreatoplinian) eruptions of Tertiary age. The rocks occupying the display well developed layering produced by base surge and proximal ba11istic fall. Accretionary lapilli are a common component. The rocks comprise tuff breccia and fine-grained rock derived from the vent walls. This sequence has undergone subsidence of at least over 650m. Most explanations for the presence of bedded tuffs at considerable depths within a volcanic pipe involve subsidence. Comparable amount of subsidence are recorded in many diatremes in other parts of the world. The ore body is distinctly circular and funnel shaped in center of diatreme. The vent area of diatreme served as channel ways for the mineralized hydrothermal fluids.