• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.50-54
• /
• 2008

There are several basic classes of recycling methods for FRP boats. The main one is 'Mechanical recycling' which involves shredding and grinding of the scrap FRP in a new product. That is one of the simpler and more technically proven methods. It recently has been reported that FRP can be recycled by separating into layers instead of crushing into powder. Many researchers should be more interested in these mechanical recycling for the eligibility. Nevertheless, because resins is very useful renewable energy, most of waste FRP regenerating methods depend on incineration (reclamation) or thermal recycling (pyrolysis). FRP is made up of laminated glass- fiber (roving cloth layer) which is also very unlikely to break into each layer. If there is an extracting method which is efficient and environment friendly removing glass fiber from waste FRP, it should also solve the another urgent problem. Laminated glass-fiber which is very limited renewable, is a serious barrier to wast FRP boat regenerating. This study is to propose a new extracting method which is efficient and environment friendly waste FRP regenerating system. And it should be applied to renewable energy applications with the waste resins of FRP. Also recycling glass fiber obtained by the separation of the roving layer from waste FRP will be consider to be useful for concrete products or structures.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.19-30
• /
• 2000

LaF, KzFS1, LBO glass were manufactured successfully by using platinum crucible in LaF and using clay crucible in the KzFS1 and LBO. There was optically transparent and the refractive indexes were measured by minum deviation method of prism. LaF, KzFS1, LBO show that the refrective indexes are $n_d$ = 1.770 in LaF, $n_d$ = 1.603 in KzFS1, $n_d$ = 1.560 in LBO. The transmittance were obtained that LaF has 85%, and KzFS1 has 83% and LBO has 89% in visible range. These glasses have no any absorption spectrum under visible range. Therefore it has no any color.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.37-43
• /
• 2008

Inorganic injection material, which is one of the ground improvement materials, consists of cement accelerator and inorganic micro particle. The inorganic injection material is known to overcome the major limitations of water glass type improvement materials, which are leaching and accompanying strength loss. The inorganic injection material is superior in durability and strength, and environmentally friendly since leaching is prevented. In this study, the effectiveness and environment-friendliness of the MIS(Micro Injection-process System) using the inorganic injection material is compared to SGR, which uses the water glass. The performed tests were unconfined compression test, chemical resistance test, and fish poison test. The unconfined compression tests showed that the MIS results in 1.7 times higher 28 day strength compared to the SGR. In addition, the strength continually increased with time for the MIS, while it decreased for the SGR. The chemical resistance tests indicated that the rate of change in length using the MIS is 10~25 times smaller than when using the SGR. The fish poison test proved that MIS was more environmentally friendly. The analysis of chemical ingredients of leached showed that the amount of $Cr^{6+}$, Pb and Si leached from the MIS is less compared to the SGR. Accordingly, the MIS grout is more high-strength than existing SGR grout. It is excellent in shortening of construction period, structural stability of foundation and environmentally friendly. So, it is considered that it has not little the problem about groundwater pollution.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.49-56
• /
• 2011

Recently, the ground injection method using water glass as one of the components of the main resources and the products of the construction has some basic problems for permanent reinforcement of foundation and stopping leakage of water because it has some serious problems such as durability reduction, compression strength reduction and eluviation. This study was to evaluate the environmental impact and durability of the developed friendliness of Natural and Durable Stabilizer(NDS) of inorganic injection and Space Grouting Roket(SGR) with typical water glass type material. Two materials, NDS and SGR, were compared with each other by unconfined compressive strength test, fish poison test, durability test and triaxial permeability test. The results of the durability test indicated that the 28-day strength of the NDS was 1.5 times higher than that of the SGR. The fish poison test proved that the survival rate in the SGR and NDS is 50~70%, and 100%, respectively. Therefore, the NDS has higher survival rate than that of the existing SGR. The NDS will be considered by an environmentally friendly product and moreover it has a few problems for soil and groundwater pollution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1177-1183
• /
• 2001

This study was done to investigate the effects of ethanol extract of Cassia semen (Cassia tora L.) on the activities of hepatic oxygen free radicals metabolizing enzymes and blood lipid profile in rats of hepatotoxicity induced by ethanol. Sprague-Dawley male rats weighing 100~160 g were divides into 5 groups; control grouts (CON), Cassia semen ethanol extracts (200 mg/kg) treated group (CEL), ethanol (10 mL/kg, 35%) treated group (ETH), Cassia semen ethanol extracts (200 mg/kg) and ethanol treated group (CE1 ) and Cassia semen ethanol extracts (400 mg/kg ) and ethanol treated group (CE2), respectively. Compared with ETH, the growth rate of CE1 and CE2 were to be increased tendency, and in blood levels of total cholesterol, LDL-cholesterol and the activities of alanine aminotranferase and asparate aminotranferase elevated by ethanol were significantly decreased (p<0.05). It was observed that the activities of superoxide dismutase, catalase, xanthine oxidase and glutathione peroxidase of rat liver increased by ethanol, were more decreased by the treatment of Cassia semen ethanol extract than the only ethanol-treated group. The content of glutathione depleted by ethanol treatment was increased in CE1 and CE2. TBA-reactants of liver increased by ethanol were decreased in CE1 and CE2, compared with ethanol-treated group. These results suggested that ethanol extract of Cassia semen may influence upon the ability of oxygen free radical detoxication and lowering of blood lipid level on ethanol-induced hepatotoxicity in rat.

• Applied Microscopy
• /
• v.35 no.4
• /
• pp.10-15
• /
• 2005

Cultured neurons from Drosophila brain on a glass coverslip to understand the structural basis of synapse were prepared for TEM observations. Neurons on a coverslip were fixed, dehydrated and embedded in Epon without separating from coverslip. After polymerization, the block was placed in 49% hydrofluoric acid to remove the coverslip. The block was examined under a light microscope to select exact neurons, then trimmed and sectioned for TEM observation.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.141-150
• /
• 2010

Basaltic ash of Udo tuff cone, Jeju Island, was almost fresh across strata, but significantly altered toward surface by supergene process. The supergene alteration of the Udo tuff was examined by using X-ray diffraction, scanning and transmission electron microscopy, and electron microprobe analysis for elucidating the alteration process of basaltic ash in terrestrial environments. Fresh ash particles were composed of glass matrix, plagioclase, olivine, and pyroxene. The glass matrix was selectively replaced inward by colloform alteration rinds of Fe-Ti-rich amorphous silicate nanogranules and smectite, often leaving glass core at the center of larger ash particles. Some of the dissolved species released from the altered ash particle precipitated as fine honycomb aggregates of smectite on the pore walls, contributing to the cementation and lithification of volcanic ash.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.9-14
• /
• 1993

The free, ester and insoluble bound phenolic acids in the extracts from defatted perilla seed flour were isolated and their antioxidative activities were evaluated in comparison with commercial synthetic antioxidants. Total phenolic content of the perilla seed was 0.75% as chlorogenic acid. Each percent ratio of the content of free, ester, and insoluble bound phenolic acid to total phenolic content was 87.5, 7.5 and 5.0% respectively. Chlorogenic acid was identified as a major phenolic acid and a small amount of caffeic acid was also identified in the free phenolic acid extract, but they were not found in soluble ester and insoluble bound phenolic extracts by two dimensional paper chromatography. Each type phenolic extract from 30g of deffated perilla flour showed antioxidant activity similar to that of BHT (0.02%, w/w) in 200g of soybean oil substrate inspite of the difference of each phenolic content.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.244-256
• /
• 2009

The psoralen-pyrimidine base complexes resulting from interstrand cross-linking through $C_4$-cycloaddition is studied by ab initio and DFT methods. The results indicate that in the case of the molecular complex formation between psoralens and pyrimidine base, the most probable photocycloadditions are 8-MOP< >Thy, Ps< >Cyt and Ps< >Thy. The geometries of photoadducts were optimized at the HF levels and ${\Delta}{G^{\circ}}$ were calculated. The photocycloadduct was inferred to be a C4-cycloaddition product with the stereochemistry of trans-syn 8-MOP< >Thy, trans-anti Ps(3, 4)< >Cyt, trans-anti Ps(12, 13)< >Cyt, trans-syn Ps(3, 4)< >Thy, trans-syn Ps(12, 13)< >Thy, trans-anti Ps(12, 13)< >Ps(12, 13), cis syn, cis anti Thy< >(3, 4)Ps(12, 13)< >Thy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.389-396
• /
• 2017

Peridynamics has been widely used in the dynamic fracture analysis of brittle materials. Recently, various crack patterns(compact region, floret, Hertz-type crack, etc.) of multilayered glass structures in experiments(Bless et al. 2010) were implemented with a bond-based peridynamic simulation(Bobaru et al.. 2012). The actual glass layers are bound with thin elastic interlayer material while the interlayer is missing from the peridynamic model used in the previous numerical study. In this study, the peridynamic interlayer modeling for the multilayered structures is proposed. It requires enormous computational time and memory to explicitly model very thin interlayer materials. Instead of explicit modeling, fictitious peridynamic particles are introduced for modeling interlayer materials. The computational efficiency and accuracy of the proposed peridynamic interlayer model are verified through numerical tests. Furthermore, preventing penetration scheme based on short-range interaction force is employed for the multilayered structure under compression and verified through parametric tests.