• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.729-738
• /
• 2011

This study was conducted to investigate the effect of extruded pellets (EP) containing different levels of protein (51%-55%) and lipid (9%-15%) on flesh quality of flounder (Paralichthys olivaceus) comparing with raw fish-based moist pellet (MP). Two replicate groups of 40 fish per each tank (initial mean weight 106 g) were fed one of three experimental EP (EP1, EP2 and EP3) containing different protein and lipid levels, a commercial EP (EP4) and MP for 16 weeks. Moisture content of fish fed MP was significantly higher than that of fish fed all EP. Significantly higher contents of 16:1n-7, 20:4n-6, 20:5n-3 and lower 18:2n-6 were observed in fish fed EP4 and MP compared with fish fed EP1, EP2, EP3. The 22:6n-3 content was not significantly different among all groups. Taurine content of fish fed MP was significantly higher than that of fish fed all EP. Asparagine content of fish fed EP1 was significantly higher than that of fish fed EP2, EP, EP4 and MP. Significant difference were observed in lysine and serine contents of fish fed experimental diets. In nucleotides and their related compounds, ATP and AMP content was not affected by diets. Significant difference were observed in IMP contents of fish fed experimental diets. Textural properties, no significant difference was observed among the fish groups fed different diets.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.128-137
• /
• 2005

In this study we measured the amount of light energy that was projected through the tooth material and analyzed the degree of polymerization by measuring the surface hardness of composites. For polymerization, Optilux 501 (Demetron, USA) with two types of light guide was used: a 12 mm diameter light guide with 840 nW/$cm^2$ light intensity and a 7 mm diameter turbo light guide with 1100 nW/$cm^2$. Specimens were divided into three groups according to thickness of penetrating tooth (1 mm, 2 mm, 0 mm). Each group was further divided into four subgroups according to type of light guide and curing time (20 seconds, 40 seconds). Vickers' hardness was measured by using a microhardness tester. In 0 mm and 1 mm penetrating tooth group, which were polymerized by a turbo light guide for 40 seconds, showed the highest hardness values. The specimens from 2 mm penetrating tooth group, which were polymerized for 20 seconds, demonstrated the lowest hardness regardless of the types of light guides (p < 0.05). The results of this study suggest that, when projecting tooth material over a specified thickness, the increase of polymerization will be limited even if light intensity or curing time is increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.335-342
• /
• 2011

The purpose of this study was to investigate the effects of mugwort powder on the quality characteristics and antioxidant activity of Maejakgwa. Maejakgwa were prepared with mugwort powder at levels 0%, 1%, 3% and 5% ($60{\pm}1^{\circ}C$, 14 days). The lightness, redness, and yellowness values of Maejakgwa significantly reduced depending on mugwort powder. The hardness of Maejakgwa was decreased with the increase of storage period and increased with the increase of mugwort powder. In the sensory evaluations, the Maejakgwa prepared with 3% added mugwort powder received higher acceptance scores for the properties of color, taste, hardness, crispiness, adhesiveness and overall acceptability. As the mugwort powder content increased, acid value and peroxide value were decreased. With the increase of storage period, acid value and peroxide value of all sample increased but growth rate of these values decreased with the addition of the mugwort powder. DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity was improved significantly via the addition of mugwort powder and decreased as storage period increased. During storage period, Maejakgwa with mugwort powder showed a stronger antimicrobial effect in yeasts and molds than in total aerobic bacteria. Coliform bacteria were not detected in all samples. Also the antimicrobial activity was increased with the addition of the mugwort powder and decreased as storage period increased. The results show that addition of the mugwort powder to foods with fat such as Maejakgwa would be a useful way to enhance the antioxidant quality, sensory characteristics and shelf life.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.43-52
• /
• 2006

Topical fluoride application for children is a widely peformed procedure in the field of pediatric dentistry to prevent dental caries. However, it is recently recognized as having some unwanted effects on several esthetic restorative materials as it roughens the surface of the restorative materials. The aim of this study was to evaluate the surface changes in composite resins to topical fluoride. Composite resins(Z $250^{(R)}$, Ultraseal $XT^{(R)}$ Filtek $flow^{(R)}$ $Revolution^{(R)}$, $Denfil^{(R)}$) in topical fluoride agents were immersed and their surface roughness, weight loss and SEM were evaluated. The results were as follows : 1. The 4 minutes-immersion groups showed more roughened surface than 1 minute-immersion groups and the control groups showed the smoothest surface among all the materials, and there was statistically significant difference except the revolution between the groups. 2. There was no significant difference between the 1 minute-immersion groups and 4 minutes-immersion groups in weight loss. 3. The experimental group treated with topical fluoride gel showed the generally mere roughened surface than control group in the SEM findings.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.208-215
• /
• 2005

The 10mm diameter aggregates made of clay, carbon and $Fe_2O_3$ were prepared to investigate the mechanism of black core formation. The specific gravity, absorption rate, percent of black core area, fracture strength, total Fe analysis, and XRF were measured at various compositions, sintering temperatures, sintering times, sintering atmospheres, and sintering methods. Small addition of $Fe_2O_3$ did not affect physical properties of the aggregates; however, the percent of black core area increased with increasing carbon contents and increasing sintering temperature. Specific gravity of the aggregates decreased and the water absorption ratio increased with increasing percent of black core area. The aggregates sintered at oxidation atmosphere showed clear border between shell and black core area. Hence, the aggregates sintered at reduction atmosphere showed only black core area in the cross-section of the aggregates. The specific gravity of the aggregates sintered at reduction atmosphere increased with increasing carbon contents and that was the lowest of all comparing other aggregates sintered at different atmospheres. Adsorption rate increased with increasing carbon contents at all atmospheres. The fast sintered aggregates showed lower specific gravity, higher absorption rate, and more black core area than the normally sintered aggregates. It was turned out that the aggregates having more black core area showed higher fracture strength than that of aggregates with no black core area. From the total Fe analysis, the concentration of Fe and FeO was higher at black core area than at shell. Because the concentration of $Fe_2O_3$ in the shell was higher than other area, the color of the shell appeared red. It was also turned out from the XRF analysis that carbon was exist only at black core area.

• Clean Technology
• /
• v.13 no.2
• /
• pp.143-150
• /
• 2007

The objective of this study is to develop hydrocarbon-based cleaning agents by blending paraffins, glycol ethers and siloxanes in oder to effectively clean contaminants such as flux, solder and grease. And the effect of cleaning ability by wetting index, aniline points and solubility parameter of the formulated hydrocarbon-based cleaning agents were studied in this work. The formulated hydrocarbon-based cleaning agents were prepared on the base of physical properties of their individual components. Wetting indexes and aniline points of their were measured through experiments and solubility parameters of their were calculated based on the Hansen's equation. In this study, evaluation of cleaning ability by cleaning agents were carried out using contaminants such as flux, solder, and grease. The experimental results showed that the cleaning ability of the formulated cleaning agents was excellent in cleaning contaminants such as flux, solder and grease and that the influencing parameters on their cleaning efficiency were found to be different according to contaminant types. MC($20.3MPa^{1/2}$), DF-1 ($24.2MPa^{1/2}$) and DF-2($21.5MPa^{1/2}$) with similar solubility parameter as flux ($21.3MPa^{1/2}$) showed 100% cleaning efficiency within 3 minutes in flux cleaning. And CFC-113, MC and 1,1,1-TCE with low aniline point less than $-20^{\circ}C$ showed excellent cleaning efficiency in solder cleaning. DG-1($16.2\;MPa^{1/2}$) and DG-2($15.5\;MPa^{1/2}$) with similar solubility parameter as grease($15.0{\sim}17.0\;MPa^{1/2}$) showed relatively low cleaning efficiency of grease, but CFC-113 and MC with high wetting index and low aniline point showed good cleaning efficiency in grease cleaning. As a result of this study, the hydrocarbon-based cleaning agents alternative to regulated cleaning agents such as CFC-113, 1,1,1-TCE and MC were able to be developed through properly blending paraffins, glycol ethers and siloxanes for cleaning flux, solder and grease. And it can be shown that various influencing parameters of cleaning efficiency such as wetting index, aniline point, solubility parameter and etc. of the non-aqueous cleaning agent should be reviewed for prediction of their cleaning ability and can be applied to formulation of cleaning agents.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.137-155
• /
• 1999

Recently, Televiewer(Borehole Acoustic Scanner(Televiewer)) has come to be widely used specially for the general engineering construction design. The Televiewer tool using a focussed acoustic beam is to detect the amplitude and traveltime of each reflected acoustic signal at the wall, resulting in the amplitude- and traveltime image respectively. Fractures can be well detected, because they easily scatter the acoustic energy due to the highly narrow beam. In addition, the drilling work will rough the borehole wall so that the acoustic energy can be scattered simply due to the roughness of the wall. Thus, the amplitude level can be directed associated with the elastic properties(impedance) and the hardness of the rock as well. Meanwhile, the traveltime image provides an information about the borehole shape and can be converted to a high precision 3D caliper log(max. 288 arms). In this paper, based on the high resolution of Televiewer images, general evaluation methods are illustrated to derive very reliable rock parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.691-700
• /
• 2006

Based on the destination IP address of incoming packets, the Internet routers determine next hops and forward packets toward final destinations through If address lookup. The bandwidth of communication links increases exponentially fast as well as the routing table size grows significant as the number of single host networks attached to the Internet increases. Since packets should be processed at wire-speed, the increased link speed reduces the processing time of a packet in routers, and hence more efficient and fast IP address lookup algorithms and architectures are required in the next generation routers. Most of the previous IP lookup schemes compare routing prefixes of shorter length first with a given input IP address. Since IP address lookup needs to find the most specific route of the given input, search continues until the longest matched prefix is found while it keeps remembering the current test matching prefix. In this paper, based on binary search on prefix length, we proposed a new IP address lookup algorithm which compares longer prefixes first. The proposed scheme is consisted of multiple tries with prefixes on leaves only. The trie composed of the longest prefixes is primarily searched whether there is a match with the given input. This processing is repeated for the trio of the next longer prefixes until there finds a match. Hence the proposed algorithm provides the fast search speed. The proposed algorithm also provides the incremental update of prefixes while the previous binary search on length scheme does not provide the incremental update because of pre-processing requirement. In this paper, we performed extensive simulations and showed the performance comparisons with related works.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.18-29
• /
• 2010

Offshore subsurface storage of $CO_2$ is regarded as one of the most promising options to response severe climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the offshore subsurface geological structure such as the depleted gas reservoir and deep sea saline aquifer. Since 2005, we have developed relevant technologies for marine geological storage of $CO_2$. Those technologies include possible storage site surveys and basic designs for $CO_2$ transport and storage processes. To design a reliable $CO_2$ marine geological storage system, we devised a hypothetical scenario and used a numerical simulation tool to study its detailed processes. The process of transport $CO_2$ from the onshore capture sites to the offshore storage sites can be simulated with a thermodynamic equation of state. Before going to main calculation of process design, we compared and analyzed the relevant equation of states. To evaluate the predictive accuracies of the examined equation of states, we compare the results of numerical calculations with experimental reference data. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_{2}O$, $SO_{\chi}$, $H_{2}S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. This paper analyzes the major design parameters that are useful for constructing onshore and offshore $CO_2$ transport systems. On the basis of a parametric study of the hypothetical scenario, we suggest relevant variation ranges for the design parameters, particularly the flow rate, diameter, temperature, and pressure.