• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.141-145
• /
• 2004

This study was pursued to measure skin feeling of cosmetics by mechanical methods. For this attempt, skin feeling of cosmetics such as spreading properties, tackiness, and residual greasy feeling after skin application was explored with the amount and kinds of cosmetic compositions-emulsifiers, waxes, thickeners, polyols, and oils. Furthermore, the relationship between these cosmetic compositions and viscometry of cosmetic products was studied. In case of emulsifiers, waxes, and thickeners, they showed strong correlation with both skin feeling and the value of phase angle, the property of viscometry, respectively, while polyols and oils were observed a special tendency neither skin feeling nor the property of viscometry. It leads to the conclusion that skin feeling may be corresponded to not values of a mechanical measure completely but a function of several properties. We expect that a better correlation can be discovered with additionally measured properties such as friction, volatility, etc.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.249-258
• /
• 2000

본 논문에서는 지반-구조물 상호작용계의 강성에 관련된 물성값들을 지진계측결과를 바탕으로 효과적으로 추정할 수 있는 방법에 대해 연구하였으며 제안된 방법의 검증은 국제공동 연구의 일환으로 최근 대만의 화련에 건설된 대형지진시험구조물에서 계측된 지진 응답을 사용하여 수행하였다. 지반-구조물 상호작용계의 지진응답해석을 위해서 구조물과 근역지반은 축대칭유한요소로 모형화하고 원역지반은 축대칭 무한요소를 사용하였으며 이때 입력 지진하중은 부구조법에 근거한 파입력기법이 고려되었다 지진계측결과를 사용하여 각 영역의 물성값을 제약적 최속강하법을 사용하여 추정하였는데 추정된 계수들을 사용하여 계산된 지진응답이 계측치와 매우 잘 일치하여 추정결과의 타당성을 검증할 수 있었다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.128-135
• /
• 2001

본 논문에서는 지반-구조물 상호작용계의 입력하중과 강성에 관련된 물성값들을 구조물에서 계측된 지진응답만을 사용하여 효과적으로 추정할 수 있는 새로운 방법을 제안하였는데, 제안된 방법은 비지계수 추정을 위한 목적함수가 입력하중에 독립적이기 때문에 구조물에서 계측된 지진응답만으로 미지계수의 추정이 가능하도록 되어있다. 본 연구에서 제안된 방법의 검증은 국제공동 연구의 일환으로 최근 대만의 화련에 건설된 대형지진시험 구조물에서 계측된 지진 응답을 사용하여 수행하였다. 추정된 입력하중과 지반과 구조물의 강성에 관련된 물성값들을 사용하여 계산된 지진응답의 계측치와 매우 잘 일치하여, 추정결과의 타당성을 검증할 수 있었다.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.129-136
• /
• 2005

This paper describes the implementation of rock mass rating evaluation based on genetic algorithm(GA) and conditional simulation technique to estimate RMR in the area without sufficient borehole data RMR were estimated by GA and conditional simulation technique with reflecting distribution feature and spatial correlation. And RMR determined by GA were compared with the results from kriging. Through the analysis of the results from 30 simulations, the uncertainty of estimation could be quantified.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.171-177
• /
• 2008

In this paper, we have measured the fundamental properties of chime stone for Pyeongyeong. The properties are measured by wave propagation in the stone without destroying the stones, the measured properties are the chime stone density, natural frequencies of extensional wave and bending wave, and Young's modulus which is calculated by the measured properties. To find a value for Young's modulus, the fundamental frequencies which are obtained through spectrum analysis of extensional wave and bending wave are used. We calculated Young's modulus of chime stone by theoretical study and measurement on extensional wave and bending wave of the beam. As a result, we obtained Young's modulus by the fundamental frequencies of extensional wave and bending wave which deviation is within 2%.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.87-93
• /
• 2001

Velocity anisotropy of unconsolidated sediments in the Ulleung Basin, East Sea were studied by using 22 piston cores. Velocity anisotropy shows about 0.4 and 1.2％ in the Plain and Slope sediments, respectively. Horizontal velocity is greater than vertical velocity. It is resulted in positive anisotropy. Thus, bedding must be regarded as the principal cause of acoustic anisotropy in the Ulleung Basin sediments. The differences of the value are different from 5 m/s to 18 m/s in the Plain and Slope area, respectively. The relationships between physical properties and velocity anisotropy are clearly grouped. This result suggests that the slope sediments are probably affected by sedimentological (esp. physical properties) changes resulting from diagenesis.

• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.184-191
• /
• 2000

본 연구에서는 국내 10MW급 기력발전소의 소형 터빈 로터에 대한 응력 해석을 실시하였다. 터빈 로터의 기하학적 형상, 증기의 온도 및 압력 등의 기동조건 변화, 로터 재료의 온도에 따른 물성값 등을 고려하여 대류 열 전달계수를 계산하는 사용자 부프로그램을 구성하였으며, 이를 바탕으로 열해석을 실시하여 로터의 온도 분포를 결정하였다. 이 온도분포 조건에서 시간 경과에 따른 열응력 해석을 실시하여 로터의 응력 분포를 결정하였으며 그 결과 취약부위에서의 응력변동 범위 및 가동중 정상상태 응력수준을 결정하였다. 이 취약부위의 응력값과 운전이력을 이용하여 크리프 수명과 피로수명을 계산하고 로터의 잔여수명을 결정하는 방법을 논의하였다.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.230-234
• /
• 2020

A system that uses deep-learning techniques to predict properties from molecular structures has been developed to apply to chemical, biological and material studies. Based on the database where molecular structure and property information are accumulated, a deep-learning model looking for the relationship between the structure and the property can eventually provide a property prediction for the new molecular structure. In addition, experiments on the actual properties of the selected molecular structure will be carried out in parallel to carry out continuous verification and model updates. This allows for the screening of high-quality molecular structures from large quantities of molecular structures within a short period of time, and increases the efficiency and success rate of research. In this paper, we would like to introduce the overall composition of the materiality prediction system using deep-learning and the cases applied in the actual excavation of new structures in LG Chem.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.62-67
• /
• 2012

In this research, mulberry fruit was processed into mulberry fruit syrup (MFS) using sugar and then used as stabilizer for anthocyanine pigment in yanggeng. MFS was added to the yanggeng in order to make mixture ratio of 0%, 5%, 10%, 15% and 20%. The resulting sensory and physicochemical aspects, as compared between the various MFS ratio were investigated. The yanggeng L and b values decreased with increasing ratio of MFS. With addition of MFS the sensory evaluation results for, taste, color, flavor, texture and overall acceptability improved. The yanggeng prepared using MFS found to possess more effective antioxidants behavior as observed by in vitro evaluating 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging and superoxide radical activities. The $IC_{50}$ of the antioxidant was found to be proportional to the mulberry fruit syrup concentration in the yanggeng.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.148-151
• /
• 2002

본 연구에서는 Ca, In, V, Al을 첨가 원소로 사용한 YIG 페라이트 분말을 분무건조기로 준구형 과립으로 만들어 일반적인 세라믹 제조 공정 방법으로 다결정 테를 제조하였고, 소결온도와 첨가원소의 조성비에 따른 YIG 페라이트의 기본물성과 전자기적 특성 변화를 조사하였다. 제조된 YIG 페라이트에 대한 기본 물성과 자기 특성을 밀도측정기, XRD, SEM, VSM, Network Analyzer 등을 이용하여 측정 분석하였다. $Y_{2.1}$C $a_{0.9}$F $e_{4.4}$ $V_{0.5}$I $n_{0.05}$A $l_{0.05}$ $O_{12}$ 조성의 YIG 페라이트에 대한 전자기적 특성 측정 결과 13$50^{\circ}C$에서 소결한 YIG 페라이트에서 우수한 삽입손실 값과 Isolation 값을 나타내였으며 이론밀도의 92%의 높은 밀도값을 가지며 높은 포화자화(4$\pi$Ms) 값을 지닌 우수한 전자기적 특성을 나타내었다.내었다.내었다.