• Journal of Legislation Research
• /
• no.54
• /
• pp.261-301
• /
• 2018

In South Korea, the number of households that rear companion animal has been gradually increasing. With the rise of household dogs, the frequency of humans that are being bitten by another's dog has also increased. This type of accident, which is known as a dog bite accident throughout the United States. It can cause significant physical and emotional damage to the victims and may result in grave injuries or death. Dog bite accidents are serious public health problems and can cause immeasurable hidden costs to the community. South Korea has enacted several laws to address dog bite accidents, which include the Animal Protection Act, the Civil Act, and the Criminal Act. On March 20, 2018, the Animal Protection Act was amended to reinforce the current legislation. These amendments addressed the duty of care owed by a companion dog owner to society members and the punishment that an owner of a fierce dog would face in the event of a dog bite accident. Conversely, several states in the United States have enacted a single law that regulates the details regarding dog bite accidents, such as the type of dog or animal, the type of damage, the scope of compensation for damages, and the scope of recognition of liabilities. This paper is intended to review the present situation of dog bite legislation in several states in the United States, which have a variety of laws that address dog bite accidents, and compare them with current South Korean dog bite legislation. Through this research, this paper will discuss what issues may exist in South Korean's current dog bite laws, analyze the responsibility of companion dog owners, and provide solutions to any issues that are discovered.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.247-252
• /
• 2005

The wedge type rail clamp has the operating mechanism: First, the jaw pad clamps a rail with small clamping force Next as the wind speed increases, the clamping force of the jaw pad is increased by the wedge. In order to design the wedge type rail clamp, we need to determine the proper wedge angle to minimize the sliding distance of a roller and the proper clamping angle of a locker to generate the initial clamping force of a jaw pad. The researches for the proper wedge angle have conducted, and in this study we conducted the investigation to determine the proper clamping angle of a locker in the rail clamp with wedge angle of $10^{\circ}$. Because the initial damping force of the jaw pad was determined by the clamping angle of the locker, in order to carry out the clamping force of a jaw pad, we measured the locking force applied to a locker with respect to the clamping angle of a locker, such as $3^{\circ},\;4^{\circ},\;5^{\circ},\;6^{\circ},\;$ using a pressure gauge, and compared the results with the FEA results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.59-65
• /
• 2010

This paper presents the study on the contact stress analysis of a pair of mating spur gears during rotation. Contact stress analysis is performed between two spur gear teeth at different contact positions during rotation. An example is presented to investigate the variation of contact stress on a pair of mating gears with contact positions. The variation of contact stress during rotation is compared with the contact stress at lowest point of single tooth contact(LPSTC) and AGMA Equation for contact stress. The results show that contact stress varies along the contact position and gets maximum values in the beginning and end of the contact. In this study, the gear design considering the contact stress on a pair of mating gears is more severe than that of AGMA standard.

• The Safety technology
• /
• no.102
• /
• pp.38-38
• /
• 2006

• 발명특허
• /
• v.36 no.12
• /
• pp.50-53
• /
• 2011

맨홀에 대해 남들보다 조금 더 깊이 생각한 사람이 있다. (주)한국주조의 이상각 대표는 물림형 장금장치 맨홀 뚜껑을 개발, 이제는 차가 지나가도 맨홀 뚜껑은 덜커덩 소리를 내지 않는다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.99-108
• /
• 1999

A four-degree-of-freedom non-linear model with time varying mesh stiffness has been developed for the dynamic analysis of spur gear trains. The model includes a spur gear pair, two shafts, two inertias representing load and prime mover. In the model, developed several factors such as time varying mesh stiffness and damping, separation of teeth, teeth collision, various gear errors and profile modifications have been considered. Two computer programs are developed to calculate stiffness of a gear pair and transmission error and the dynamic analysis of modeled system using time integration method. Dynamic tooth and mesh forces, dynamic factors are calculated. Numerical examples have been given, which shows the time varying mesh stiffness ha a significant effect upon the dynamic tooth force and torsional vibrations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.23-27
• /
• 1992

종래부터 공작기계의 성능은 그 공작기계가 발휘하는 가공정도와 가공능률이라고 하는 막연한 개념으로 취급되어 왔으나, 최근 가공정도나 가공능률을 저해하는 제현상, 예를 들면 채터나 열변형 등에 관한 정력적인 연구가 진행되면서 이들이 발생기구가 명확히 됨과 동시에 이들 제현상의 발생한계로부터 가공성능을 정량적으로 평가 해왔다. 그러나 연구보고라는 말의 성격상 연구의 대부분이 특정 현상이나 요소에 대하여 기술한 것이기 때문에 제 현상을 총괄하여 공작기계의 성능을 체계화한 것이라고볼 수는 없다. 여기서 공작물의 물림조건에서 발생 되고 있는 여러가지 문제점 중에서 척킹(chucking)된 공작물의 물림강성이 채터 진동의안정한계, 즉 가공한계에 미치는 영향에 대해서는 선삭가공에서 척 가공방식이 일반적으로 널리사용되고 있다는 점을 감안할 때 매우 중요한 과제이다. 그 중에서도 척에 물린 공작물의 경우에는 절삭저항의 작용위치와 죠의상대적인 위치에 의한 공작물 강성의 변화가 가공정도에 커다란 영향을 미친다는 것이 오래 전부터 지적되고있느 사항 중의 하나이다. 따라서 척-공작물계의 동적인 특성이 절삭현상에 미치는 영향에 대하여 동적인 관점에서 검토할 필요가 있다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.859-866
• /
• 2010

Generally, a fixed type guide-bush system is installed during machining miniature work-pieces with high precision in the multi-task CNC lathe. But a conventional guide-bush system does not provide a constant clamping force under the condition of varying work-piece diameters. It is important to maintain a constant clamping force for guaranteeing machining precision. This paper proposes a new guide-bush system with a pneumatic clamping device for the CNC Swiss-turn lathe to keep constant clamping force with changes in work-piece diameters. Through performance tests, new clamping system developed in the study showed better machining precision at the cost of a small increase in the temperature of the system than conventional systems due to an increase in the frictional heat and a change in the heat transfer route.

• The monthly packaging world
• /
• s.282
• /
• pp.93-101
• /
• 2016

딸기 포장재용으로 새로이 개발된 공중부양형 구조의 용기를 가지고 딸기가 유통 중 발생할 수 있는 짓물림 방지효과가 있는지를 분석하기 위해 일본 후쿠오카 현 쯔꾸시 시에서 도쿄까지 트럭과 항공기에 의한 수송시험을 했다. 일반적으로 사용되는 EPS용기는 수송 중 딸기 간 포장면적이 많아 흠집 발생면적이 컸으며, PET 트레이 위에 딸기를 배열시키는 '보통들이형 용기'는 과일끼리의 접촉부분에서 짓물림 현상이 많이 발생했다. 개발된 '공중부양형 용기'는 과일끼리의 접촉 없이, 유연한 PE필름으로 포장돼 수송 중 발생하는 딸기의 흠집 발생이 가장 적었다. 또한 'EPS 용기' 및 'PET용기'에 25Hz의 정상 진동을 가한 결과, 용기 내부에 발생하는 진동의 주파수 종류에 차이가 있음을 확인할 수 있었다. 'EPS용기'에서는 가진동의 25Hz보다도 큰 주파수의 진동을 많이 확인할 수 있었다

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.224-231
• /
• 2006

A six-degree-of-freedom dynamic model with time-varying mesh stiffness/damping and friction has been developed for the dynamic analysis of a gear driving system. This model includes a spur gear pair, bearing, friction and prime mover. Using Newton???s method, equations of motion for the gear driving system were derived. Two computer programs are developed to calculate mesh stiffness, transmission error and friction force and analyze the dynamics of the modeled system using a time integration method. The influences of mesh stiffness/damping, bearing, and friction affecting the system were investigated by performing eigenvalue analysis and time response analysis. It is found that the reduction of the maximum peak magnitude by friction is decided according to designing the positions of pitch point and maximum peak in the responses.