• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.186-194
• /
• 2019

Deterministic optimization, commonly used to find the geophysical inverse solutions, have its limitation that it cannot find the proper solution since it might converge into the local minimum. One of the solutions to this problem is to use global optimization based on a stochastic approach, among which a large number of particle swarm optimization (PSO) applications have been introduced. In this paper, I developed a geophysical inversion algorithm applying PSO method for the layered-earth resistivity inversion of the small-loop electromagnetic (EM) survey data and carried out numerical inversion experiments on synthetic datasets. From the results, it is confirmed that the PSO inversion algorithm could increase the inversion success rate even when attempting the inversion of small-loop EM survey data from which it might be difficult to find a best solution by applying the Gauss-Newton inversion algorithm.

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.129-143
• /
• 2024

In magnetotelluric (MT) surveys, small inhomogeneities near the surface cause a static shift in which apparent resistivities shift regardless of frequency. As the static shift in MT data leads to errors in subsurface structure interpretation, many studies have been conducted over the past few decades to mitigate or remove the distortions it caused. The most representative method involves removing static shifts from the data before inversion. Conversely, static shifts can be corrected during inversion or included in the inversion process. In addition, other geophysical data can be used to remove static shifts. However, the correction methods are limited to one-dimensional (1D) static responses, and limitations remain in two- or three-dimensional (2D or 3D) interpretation of distorted MT data owing to static shifts. This study provides a foundation for future studies on static shift by analyzing several previously published methods.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.177-189
• /
• 2012

Evaluation of three-dimensional ore body modeling has been performed by applying the geostatistical integration technique to multiple geophysical (electrical resistivity, MT) and geological (borehole data, physical properties of core) information. It was available to analyze the resistivity range in borehole and other area through multiple geophysical data. A correlation between resistivity and density from physical properties test of core was also analyzed. In the case study results, the resistivity value of ore body is decreased contrast to increase of the density, which seems to be related to a reason that the ore body (magnetite) includes heavy conductive component (Fe) in itself. Based on the lab test of physical properties in iron mine region, various geophysical, geological and borehole data were used to provide ore body modeling, that is electrical resistivity, MT, physical properties data, borehole data and grade data obtained from borehole data. Of the various geostatistical techniques for the integrated data analysis, in this study, the SGS (sequential Gaussian simulation) method was applied to describe the varying non-homogeneity depending on region through the realization that maintains the mean and variance. With the geostatistical simulation results of geophysical, geological and grade data, the location of residual ore body and ore body which is previously reported was confirmed. In addition, another highly probable region of iron ore bodies was estimated deeper depth in study area through integrated modeling.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.145-149
• /
• 2002

The static correction, which is classified into refraction based static correction and reflection based residual static correction, removes distortions caused by irregularities of thickness or velocity in near-surface. Generally, refraction statics is a time consuming process because of high dependence on the interpreter's analysis. Therefore, for huge 3D seismic data, automatic static correction which minimizes the interpreter's analysis is required. In this research, we introduce an efficient method of refraction static correction for land 3D seismic survey.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.377-382
• /
• 2007

Several prospecting methods have been used to detect deep seated small tunnel in Korea. Tunnel interpretation of seismic method has been performed mainly by wave traveltime inversion method. But it often gives inacurate solution for the exact tunnel position because of the short distance between two measuring boreholes and picking errors of first arrivals. In this study, "error tomogram" was proposed to detect tunnel position and applied to theoretical and field dat using multi-source amplitude data.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.442-446
• /
• 2003

연약지반으로 분류되는 조간대 퇴적층의 연구는 제한적인 시추자료에 의존하고 있다. 비파괴 지반조사 방법은 시추자료에서 획득할 수 없는 지층의 측방변화와 지질 이상대를 확인할 수 있는 대안이 될 수 있다. 지구물리탐사 방법은 현장 토질조사와 같이 직접적인 지반조사 방법과 병행할 경우 지반을 이해하는데 있어 한층 나은 결과를 얻을 수 있다. 부산신항 배후부지 조성지역에서 매질의 상이한 특성에 기초한 비파괴 지반조사 방법으로 이용되는 지구물리탐사를 실시하였다. 각 탐사의 결과는 서로 유사한 지층경계를 나타내며, 시추와 매립공사의 결과와도 일치한다. 또한 계측을 위해 매설된 침하판이나 매설관로의 탐지, 압밀차이에 의한 부등 침하의 측방변화 등과 같이 시추조사에서 인지하기 어려운 부분에 대한 정보를 제공하고 있다.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.251-261
• /
• 2005

The quality of MT (magnetotellurics) data highly depends on the level of artificial noise form industrial sources. We have conducted the feasibility study of MT noise modelling using digital spatial data and spatial modelling through the comparison between the predicted and the measured MT noises. A simple noise model predicting the intensity of electromagnetic field radiated from the latent noise sources, that is, the electric facilities in the building, road and high-voltage powerline, is developed in consideration of the propagation property of electromagnetic waves. From the analysis of correlation between the predicted and the measured noise power, the correlation coefficients of electric field are higher than those of magnetic field in whole frequency band. The magnetic field component has the high correlation in the narrow band near 60 Hz only. The spatial noise modelling proposed in this study would provide some useful informations for the MT surveys in the noisy environment like urban area.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.417-426
• /
• 2006

Data acquisition is as important as data processing and interpretation in the field of marine geophysical exploration. Marine geophysicist, however, may not have enough information in this field because data acquisition method has been mainly developed by the commercial companies manufacturing the equipment. Therefore, the purpose of this paper is to introduce the general data acquisition method and information to help to construct the systematic and effective survey plan. When a survey plan is set up, the most important thing is to select the seismic equipment based on required penetration depth and resolution, and then construct the survey line intervals. Although a line interval varies from the research purposes, it should be narrower than the expected subsurface structures. Also, if 100% coverage of multibeam data is required, line intervals need to be adjusted based on the equipment characteristics. In case of merging with the preexisting dataset like bathymetry, gravity and magnetic, cross-over errors occurred at the each cross point should be removed to avoid any kinds of misinterpretation.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.121-129
• /
• 2004

The geostatistical approach was applied to integrate MT (Magneto-telluric) resistivity data and borehole information for the spatial RMR (Rock Mass Rating) evaluation. Generally, resistivity of the subsurface is believed to be positively related to the RMR, thus the resistivity and borehole RMR information was combined in a geostatistical approach. To relate the two different sets of data, we take the MT resistivity data as secondary information and estimate the RMR mean values at unsampled points by identification of the resistivity to the borehole data. Two types of approach are performed for the estimation of RMR mean values. Then the residuals of the RMR values around the borehole sites are geostatistically modeled to infer the spatial structure of difference between real RMR values and estimated mean values. Finally, this geostatistical estimation is added to the previous means. The result applied to a real situation shows prominent improvements to reflect the subsurface structure and spatial resolution of RMR information.

• Geophysics and Geophysical Exploration
• /
• v.18 no.1
• /
• pp.9-13
• /
• 2015

All the resistivity data contain various kinds of noise. The major sources of noise in DC resistivity measurement are high contact resistance, measurement errors, and sporadic background noise. Thus, it is required to measure data noise to accurately interpret resistivity data. Reciprocal measurements can provide a measure of data precision and noise. In this study, we proposed a data-weighting method from reciprocity measurement. Furthermore, a data-weighting method using both the reciprocity error and data-misfit in the inversion process was studied. Applying the data-weighting method to the inversion of 3D resistivity data, it was confirmed that local anomalies are slightly suppressed in the final inversion results.