• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.57-60
• /
• 2003

광업활동이 중지된 후 적절한 조치없이 방치된 폐광석들은 보다 빠르게 풍화될 수 있는 환경에 접하게 된다. 황화광물이 풍화되면 중금속이 용해되어 주변의 지표수나 지하수 및 토양의 오염을 초래한다. 용해된 중금속 이온들은 물리화학적 환경변화가 야기되면 보다 안정한 상태로 침전, 공침 또는 흡착되어지게 될 것이다. 만약 침전된 2차광물들이 불용성 광물이거나, 산성환경에서 비교적 안정한 광물에 흡착되어 제거된 중금속이라면 자연적으로 발생하고 있는 화학반응을 통하여 자연정화가 일어난다고 할 수 있다. (중략)

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.235-251
• /
• 2007

Baeknokdam rock mass at the crest of Halla mountain is composed of Baeknokdam trachybasalt in the eastern region and Hallasan trachyte in the western region. On-going weathering, rockfall and collapse of Baeknokdam wall rock are closely linked to the weathering of trachyte distributed in the western region of Baeknokdam, though within the restricted area of eastern region trachybasalt blocks has been naturally formed and may be rolled down neering properties have been conducted. Based on the results of these experiments variations of mineralogical-petrographical characteristics of trachyte together with chemical and physical properties with respect to the degree of weathering have been analyzed. Weathering mechanism of Baeknokdam trachyte has been delineated by investigating the environmental cause of weathering and the peculiar features of weathered rock mass.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.1-16
• /
• 2016

This study estimates relationships between physical and chemical weathering indices of various rock types and topographical relief. Physical weathering properties such as rock strength and joint and chemical weathering indices such as the $SiO_2/Al2O_3$, CIA and WPI were analyzed from 18 rock outcrops in mountain and valley areas consisting of 9 rock types. The results indicate that the elevation and relief of topography increase physical strength of rock increases. It can be suggested that the total r(rock-mass strength rating) and R(rock rebound strength by Schmidt Hammer) are most useful indices as a quantitative weathering property factor to explain formative causes of topographical relief. The results also suggest that rock types such as sandstone, granite, gneiss and schist are most suitable to explain meaningful difference in topographical relief with the physical and chemical weathering indices.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.27-39
• /
• 2016

This study statistically investigates relationships between physical properties of rocks and topography by measuring and analyzing section, topographical and measured parameters of 58 bedrock outcrops at areas covered by gneiss, schist, granite, andesite, sandstone and limestone in the Korean Peninsula. Multiple linear regression analysis suggests that the joint spacing, joint continuity, weathering grade and maximum joint width of rocks among the measured parameters are related to the topographical parameters with statistical significances. Therefore, this study suggests that rock properties such as joint spacing, joint continuity, weathering grade and maximum joint width seem to greatly influence topography, although various factors can affect topographical parameters.

• Tunnel and Underground Space
• /
• v.19 no.4
• /
• pp.287-303
• /
• 2009

Rock mass in Baekrokdam at the summit of Hallasan in Jeju island is composed of two volcanic rock types: Baekrokdam trachybasalt at the eastern region and Hallasan trachyte at the western region. On-going rockfall and subsequent collapse of Baekrokdam wall rock are closely linked to the weathering of trachyte distributed in the western region of Baekrokdam. Samples of Hallasan trachyte showing different weathering grades had been collected and the polarizing microscopic observation, X-ray diffraction analysis and analysis for chemical weathering had been conducted. Formation of secondary minerals, especially clay minerals, by chemical weathering has not been identified, but the change of chemical weathering indices indicated that chemical weathering process had been proceeded to the degree for increasing and decreasing the contents of some chemical components. Changes in physical and mechanical rock properties due to weathering has also been examined. Artificial weathering test of freezing-thawing reveals that the process of crack initiation and propagation deteriorated the mechanical characteristics of Hallasan trachyte and $D_B$ = 1.5 or porosity = $20{\sim}21%$ would be the ultimate limiting value induced by the mechanical weathering processes.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.201-206
• /
• 2008

Determining the coefficient of weathering(CW) for stone heritage plays very important role in investigation and conservation plan. In most case, CW is obtained from the empirical relation, which use the difference between sonic velocities of fresh and weathered rocks. In this paper, we measured sonic velocities for the samples from Iksan, Geochang, Wonju, Goesan and Chungju of which our stone heritages are made. We first investigate the uncertainty of velocity by portable measurement by comparing it to lab measurement. There were small difference, but we conclude that the difference is not major. However, the velocity of fresh rock differs significantly among samples: ranging from 3200 to 4400m/s. This cause a lot of error in CW estimation if we use typical fresh rock velocity as of 5000m/s. Thus accurate measurement of the velocity of fresh rock is crucial to CW estimation.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.23-32
• /
• 2017

For exposed slopes, the weathering degree over time has a major effect on the engineering properties of rocks and the slope stability. Rocks are gradually changed by weathering into soil over time, and the resulting physical, chemical and mechanical changes of rocks affect the engineering stability of the slope. However, there are not many ways to objectively evaluate the weathering degree of a slope. In this study, therefore, to investigate the weathering characteristics of rocks, granite, gneiss and shale distributed in the Chungbuk region were sampled by weathering stage and changes in their component minerals and tissues were investigated. Furthermore, artificial weathering was induced using the freezing and thawing test and quantitatively investigated through porosity and absorption rate. In addition, the changes of microcracks due to artificial weathering were evaluated through box fractal dimension ($D_B$). Through mineralogical study the phase change of constituting minerals, the growth of secondary minerals, the development of micro-cracks and the fabric changes due to weathering were observed. The mineralogical, chemical and engineering evaluations of the weathering degree through the experimental results in this study are expected to be useful for analyzing the weathering characteristics and causes by rock type and for proposing a methodology to evaluate the degradation of physical properties comparatively and quantitatively.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.13-23
• /
• 2007

Weathered soils appear from the rock and its weathering result. In accordance with the degree of weathering the roch may become soft rock, weathered rock and residual soil. In general, classification method for determining the degree of weathering are performed by chemical method and N-value. But these method have some problems. So, this research is to suggest an appropriate physical method to determine the degree of weathering of weathered soils. A new classification method for determining the degree of weathering is suggested, based upon the results from fall cone test. According to the proposed physical method using fall cone apparatus, the measured values of the samples from the same area show distinctive difference of weathering. For the checking, we selected two areas. As a result, the relationship between CWI and water content according to penetration is expressed as an equation in Ilsan and Incheon area. And it proved to be a good method to determine the degree of weathering.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.170-173
• /
• 2011

국내 풍화지반의 토량환산계수를 정확하고 합리적으로 추정하는 것은 공사의 성패에 있어 매우 중요한 사항이다. 하지만 현업에서는 풍화지반의 풍화도를 정량화하는 것이 어렵고, 토량환산계수를 적용 시 외국의 기준을 사용하는 경우가 빈번하다. 뿐만 아니라, 국내 풍화지반의 토량환산계수에 관한 연구는 아직 미비하여, 끊임없이 토량환산계수의 정확성 및 사용성에 대해 문제 제기가 있어 왔다. 이에 본 연구에서는 TEPS (Tunnel Electrical resistivity Prospecting System)를 이용하여 화강암의 풍화 정도와 전기비저항의 상관관계를 도출하고 풍화지반 내 흙이 차지하는 비율(S/W 비)을 전기비저항과 개괄적으로 상관관계를 맺어 전기비저항을 이용하여 토량환산계수를 산정하는 방법을 제안하였다. 현장 관리자가 풍화지반에서 쉽게 토량환산계수 및 토공량에 관한 정보를 획득할 수 있도록 풍화지반 토공관리프로그램(WEMP)을 개발하고 토량환산계수 측정시스템을 설계하였다.

• Proceedings of the KSEG Conference
• /
• 2001.03a
• /
• pp.15-22
• /
• 2001

퇴적암의 풍화특성을 파악하기 위해서는 풍화과정을 지배하는 암석의 광물 조성과 화학성분에 대한 연구가 필요하다. 본 논문에서는 풍화정도에 따른 퇴적암의 특성을 고찰하기 위해서 대구지역에 분포하고 있는 퇴적암을 채취하여 화학 및 광물성분 분석과 시간경과에 따른 물리 및 역학특성 시험을 실시하였다. 퇴적암에 대한 풍화판정법은 시험결과 Parker의 풍화지수식이 잘 일치하였고 모암에 함유된 $Al_2$O$_3$, CaO, $Na_2$O, $K_2$O, MgO등의 화학성분과 조장석(Albite, Ab), 백운모(Muscovite, Ms), 마그네타이트(Magenetite, Mt)등의 광물성분이 풍화와 밀접한 관계가 있었으며, 또한 암석의 풍화정도와 공학적 성질에 대한 상관관계식을 제안하였다.