• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.209-214
• /
• 2007

Sr hexaaluminate($Sr_{1-x}La_xMnAl_{11}O_{19-\alpha}$) were prepared by sol-gel method of metal alkoxide with 1-butanol or ethylene glycol as a solvent. The physical properties of prepared hexaaluminates were examined by TG/DTA, XRD and $N_2$ adsorption. When ethylene glycol was used as a solvent, the decomposition reaction and dehydroxylation reaction was observed above $400^{\circ}C$ and the temperature of the formation of a crystal structure of hexaaluminate was also increased resulting in small specific surface area and low catalytic activity of methane compared to Sr-hexaaluminate with 1-butanol.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.06a
• /
• pp.159-174
• /
• 1997

삼투현상이란 반투막을 사이에 두소 저농도의 용매가 고농도의 용액으로 이동하는 현상으로 막양측 용매의 화학포텐셜이 같아지게 되면 용매의 이동은 정지되고 수두차 만큼의 삼투압차가 발생한다. 이 때 고농도 용액측에 삼투압차 이상의 압력을 가하게 되면 삼투현상과는 반대로 고농도 용액측의 용매가 저농도의 용액측으로 역류하는데 이를 역삼투현상이라 한다. 역삼투현상을 이용하여 물질을 분리하는 역삼투 공정은 막의 물리화학적 특성, 분리대상물질의 물리화학적 특성, 그리고 압력차를 추진력으로 하는 세가지 요소의 조합에 의해 행하여 진다. 역삼투는 분자크기에 따른 분리조작이 아니므로 정밀여과나 한외여과에서와 같은 유기물질의 침착현상이 적으며 결과적으로 막의 수명도 길어진다. 역삼투막은 용존염을 분리제거할 뿐만 아니라 분자량이 적은 유기물 및 Aromatic hydrocarbon 등의 분리조작에도 그 이용가능성이 고조되고 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.39-40
• /
• 2008

유기용매를 사용한 나노분산체의 경우, 유기용매를 완전하게 제거 것은 극히 어렵다. 이는 유기용매와 유기고분자와의 일부 반응되는 경우가 발생되어 전기적 물성에 영향을 줄 수 있다. 본 연구는 친환경적인 분산기법으로 물리적 분산기법을 제안하는 바이다. 양호한 분산체를 얻기위해 균질한 상태인 마이크로적 분산기법과 층상실리케이트인 층간사이에 고분자인 에폭시분자가 삽입되어 박리가 양호하게 일어나게 하는 나노적인 분산기법을 통시에 적용하여 분산이 훌륭하게 일어나는 경우를 개발하였다. 마이크로적인 분산을 위해 사용된 Homogenizer의 적용속도와 적용시간에서 원형인 Organoclay_10A Powder의 d-spacing이 262%, 263%로 증가되는 결과를 얻었다. 또한 DSC의 유리천이온도 분석에서도 적용시간의 증가에 따라 유리천이온도가 되어 원형에폭시수지에 비하여 $9^{\circ}C$상승된 결과를 얻을 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3298-3303
• /
• 2014

In order to recycle the waste bumper, techniques removing coated paint on a bumper is crucial. Chemical methods are known to be much more effective in removing the paint compared to physical methods. However, the chemical methods generally use toxic solvents and consequently cause environmental pollution. In this study, we tested a new method which combines the chemical and physical method to reduce the amount of solvent and increase the paint removal efficiency. We found that mechanical stirring increases the paint removal efficiency in soaking stage of solvent. When solid particles as a stress transfer media are incorporated into the solvent and high mechanical stirring is applied, the paint removal efficiency is very high. It was proved that the combined method can accomplish high level of the paint removal efficiency maintaining low amount of solvent consumed.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.851-856
• /
• 1989

The physical properties of essential oil of nutmeg extracted in different methods (SDE, Solvent, $CO_2$) were investigated and also the components of essential oil were analyzed using G.C. and G.C./ Mass. Solvent extraction yield was 23% and was higher than those of SDE extraction and $CO_2$ extraction. From the analysis result and physical properties of nutmeg oil, it was conformed that the nutmeg used In this experiment was similar to East Indies type. The content of sabinene was 3.6-14.1%, 28.4-48.7% for myristicin, 1.2-2.1% for elemicin, and 3.6-5.6% for safrole. The camphene was identified in SDE extracts but not in $CO_2$ extracts. The volatile components of SDE extracts and solvent extracts contained large amount of monoterpene and terpene alcohol but $CO_2$ extracts aminly contained aromatic compounds.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06a
• /
• pp.44-45
• /
• 1987

• Membrane Journal
• /
• v.25 no.4
• /
• pp.367-372
• /
• 2015

In pressure-retarded osmosis (PRO) and forward osmosis (FO) processes, solvent (permeate) flux depends on which surface the draw solution faces. There are two operation modes. PRO mode indicates that the active layer faces the draw solution, and FO mode means that the porous substrate fronts the draw stream. It is often observed that the PRO mode produces higher flux than that of FO under the same operating conditions. The current work uses the method of proof by contradiction, and mathematically proves the intrinsic flux inequality between the two modes.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.165-174
• /
• 2009

Background: With the advances of cardiac surgery, the demand for an artificial prosthesis has increased, and this has led to the development and utilization of diverse alternative materials. We conducted this research to improve an artificial prosthesis by examining the changes of the physical qualities, the pressure related tensile strength, the change in elasticity and the thermostability of a xenograft valve (porcine) and pericardium (bovine, porcine) based on the type of fixation liquid we used. Material and Method: The xenograft valves and pericardium were assigned into three groups: the untreated group, the fixed with glutaraldehyde (GA) group and the glutaraldehyde with GA+solvent such as ethanol etc. group. The surgeons carried out each group's physical activities. Each group's uniaxial tension and elasticity was measured and compared. Thermostability testing was conducted and compared between the bovine and porcine pericardium fixed with GA group and the GA+solvent group. Result: On the physical activity test in the surgeon's hand, no significant difference between the groups was sensed on palpation. For suture and tension, the GA+solvent group was slightly firmer than the low GA concentration group. In general, the circumferential uniaxial tension and elasticity of the porcine aortic and pulmonary valves were better in the fixed groups than that in the untreated group. There was no significant difference between the GA and GA+solvent groups (p>0.05). Bovine and porcine pericardium also showed no significant difference between the GA group and the GA+solvent group (p>0.05). When comparing between the groups for each experiment, the elasticity tended to be stronger in most of the higher GA concentration group (porcine pulmonary valve, porcine pericardium). On the thermostability testing of the bovine and porcine pericardium, the GA group and the G+solvent group both had a sudden shrinking point at $80^{\circ}C$ that showed no difference (bovine pericardium: p=0.057, porcine pericardium: p=0.227). Conclusion: When fixing xenograft prosthetic devices with GA, adding a solvent did not cause a loss in pressure-tension, tension-elasticity and thermostability. In addition, more functional solvents or cleansers should be developed for developing better xenografts.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.163-170
• /
• 2014

Lipid membranes composed of phosphatidylcholine (PC) are used in biophysical study to mimic cellular membranes and interactions between the membrane and chemicals, where organics solvents are used in dissolving lipids or chemicals. Later, solvents are removed from the solution under nitrogen gas at room temperature, followed by the further removal of the solvent at vacuum condition for several hours. In this process, some solvents are easily removed under described conditions above and others are required more severe conditions. In this study, $^{31}P$ solid-state nuclear magnetic resonance (SSNMR) techniques and differential scanning calorimetry (DSC) were used to see any changes in the line shapes of $^{31}P$ NMR spectra of multilamellar vesicles (MLVs) samples of POPC and in the phase change temperature of multilamellar vesicles (MLVs) of DPPC in DSC thermogram with or without any residual solvents. The thermodynamic parameters associated with the solvents did exhibit noticeable changes depending on solvent types. Thus, it is concluded that solvents should be carefully chosen and removed completely and experimental results should also be interpreted with caution particularly for the experiments investigating lipid phase changes and related topics.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.792-797
• /
• 2015

Graphene has a wide spectrum on its application field due to various and excellent physical properties. However, it is very difficult to apply that graphene exists as lump or fold condition in general organic solvents. Besides, graphene was difficult to maintain as uniform condition due to chemical inert and distributions with various size and shapes. Therefore, this study was focused to study dispersion and modifying methods of aggregated graphene. The dispersion methods contain as follow: i) physical milling using glass bead, ii) co-treatment of glass bead and ultrasonic waves, iii) dispersion in organic solvents, iv) modifying with dry-ice. Milling using glass bead with size 2.5 mm was effective to be size decrease of 36.4% in comparison with control group. Mixed treatment of glass bead (size 2.5 mm) and ultrasonic waves (225W, 10 min) showed relative size decrease of 76%, suggesting that the size decrease depends on the size of glass bead, intensity of ultrasonic waves and treatment time. Solvents of Ethyl acetate (EA) and Isoprophyl alcohol (IPA) were used in order to improve dispersion by modifying surface of graphene. IPA of them showed a favorable dispersion with more -CO functional groups in the FT-IR analysis. On the other hand, the oxygen content of graphene surface modified by dry-ice was highly increased from 0.8 to 4.9%. From the results, it was decided that the favorable dispersion state for a long time was obtained under the condition of -CO functional group increase in IPA solvent.