• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.160-164
• /
• 1998

본 연구에서 Doi-Edwards 점탄성 조성방정식의 Hadamard 안정성 분석을 행하였 다. Hadamard 안정성은 방정식의 탄성 성질과 연관되는 특성으로 파장이 짧고 진동수가 큰 파동에 의한 외란 하에서 식의 안정성을 의미한다. 먼저 안정성을 위한 일반 3차원 조건을 수립하고 단순한 1차원과 2차원 외란하에서 필요조건을 구하였다. Doi-Edwards 이론을 따 르는 물질의 단순전단유동을 고려함에 의하여 순간 전단변형률이 1.8786을 넘어설 때 파장 이 짧고 진동수가 큰 외란에 의하여 불안정성이 나타남이 증명되었다. 이 안정성의 임계치 는 실제 고분자공정 뿐 아니라 실험실에서도 쉽게 도달할수 있는 값으로 이와 같은 불안정 유동은 mi-crophase separation과 같은 물리적 현상과는 관련이 있다는 증거가 없으므로 조 성방정식 자체가 지니는 수학적 모순점에 기인한 것이라 할수 있다.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.41-41
• /
• 2010

에어컨용 냉매 압축기, 냉장고용 냉매압축기 및 자동차 샷시 부품들은 주로 겹치기 필릿용접을 GMAW 으로 실시하고 있다. 그러나 용접 시 스패터 발생으로 인한 추가공수가 요구되며 작업환경 또한 열악한 실정이다. 따라서 저가의 고생산이면서 용접비드의 외관이 미려하고 스패터, 소음 그리고 Fume 이 발생되지 않는 청정한 TIG 용접이 있지만, 용접속도가 수십 cpm 이하로 제한되어 생산성이 낮다는 기술적 모순을 가지고 있다. TIG 용접에서 생산성을 증가시키기 위해 모재와 와이어를 고속 용융 시키려면 전류를 높여 입열량을 증가시켜야 하지만, 증가된 전류로 인하여 상승된 아크력이 험핑비드와 언더컷이 발생되는 물리적 모순을 가진다. 또한 필러와이어를 사용한 기존의 TIG 용접에서 필러 와이어는 주로 원형 단면 와이어를 사용하게 되는데 와이어의 직경이 증가함에 따라 비표면적은 감소하여 용융효율이 낮아지므로 $\Phi$1.2 이하의 필러와이어를 송급하여 용접하였다. 그러나 요구되는 용착량이 큰 경우 필러 와이어를 고속으로 송급하게 되는데 이 경우 필러 와이어 용융이 곤란하거나 송급상의 문제가 자주 생겨 용접속도를 고속으로 하기 곤란하였다. 따라서 필러와이어를 사용한 TIG 용접에서 용착금속의 용융효율을 높게 함으로서 전류를 크게 증가시키지 않으면서도 용접속도를 높일 수 있는 용접 공정개발이 필요한 실정이다. 본 연구에서는 비표면적을 증가시켜 용착금속의 높은 용융효율을 얻을 수 있도록 개발된 와이어와 기존의 $\Phi$3.2 일반와이어 및 를 이용하여 BOP TIG 용접에 비교 실험하였으며, 개발된 와이어와 기존의 $\Phi$1.2 필러와이어를 이용하여 필릿용접부에 적용 실험하여 비교하였다. 그 결과 개발된 와이어의 경우 적절한 비드를 형성하였으나 3.2 일반와이어의 경우 과도한 볼록비드와 불용착부의 문제가 발생하였고, 필릿용접 비교실험에서는 각각 200cpm과 50cpm에서 적절한 비드가 형성되어 더 높은 용착금속 용융효율을 얻을 수 있었다.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.215-228
• /
• 2015

A creative innovation and an innovative problem-solving of industrial companies can be achieved by overcoming the challenges of technical and physical contradictions. The approaches to address conflicting and paradoxical problems, such as technical and physical contradictions have a crucial role in advancing the quality assessment for manufacturer and service provider. The term, technical contradiction, depicts the state that improvement of one ends of IFR (Ideal Final Result) leads to unfavorable condition of the other ends, and results in conflicting problem. Another type of contradictions that's discussed in this study is a physical contradiction which is due to two mutually opposing states of the means of ends, and gives paradoxical situation. By integrating the means-ends chain perspectives, the physical contradiction that is a specifically root-causes, "means", can be initially addressed to resolve the downstream problem of technical contradiction which represents a general and abstract goals, "ends". This research suggests IFR resolution processes to handle both physical contradiction of means and technical contradiction of ends by employing causal relationship with IFR, effects and causes. In summary, the study represents three major processes that resolve such contradictions are demonstrated as follows: 1) Derivation of causal and hierarchical relationship among IFR, ends and means by considering CAED (Cause-And-Effect Diagram) and LT (Logic Tree). 2) Identification of causal relationship between physical contradiction and technical contradiction by using TPCT (TRIZ Physical Contradiction Tree) and TCD (Technical Contradiction Diagram). 3) Application of integrated TRIZ principles by classifying 40 inventive principles into 4 general conditions of the separation principle of mutually opposite states in space, in time, based on conditions, and between the parts and the whole. In order to validate the proof of proposed IFR resolution processes, the analysis of the TRIZ case studies from National Quality Circle Contest in the years, 2011 to 2014 have been proposed. The suggested guidelines that are built based on TRIZ principles can uniquely enhance the process of quality innovation and assessment for quality practitioners.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.209-221
• /
• 2023

In the external inspection and packaging stages of products used in the semiconductor manufacturing process, there is a problem in which particles are adsorbed to the product itself or a carrying tool due to electrostatic discharge. This study presents a methodology that can improve the problem of adsorption of particles to a product by using a practical TRIZ technique. By applying the proposed practical TRIZ-based methodology, the problem was defined, and contradictions caused by product waiting time were derived. Among the derived contradictions, physical contradictions were set and the concept of 'space separation' was applied to derive solutions such as 'installation of Ionizer' and 'improvement of the layout of the workroom'. As a result of the experiment by applying 'Ionizer Installation' and 'Workroom Layout Improvement' derived through the application of practical TRIZ, it was confirmed that the particle adsorption problem that occurs during the waiting time of the product can be solved.Through this study, it is expected that workers, facility engineers, and technical engineers working at manufacturing processes will be able to effectively solve the problems they face through creative thinking and change of ideas by using practical TRIZ techniques, and contribute to innovative technology development and productivity improvement.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.132-138
• /
• 2004

We used the self-consistent one-dimensional model applied to FCT algorithm and FEM method in a wire-cylinder type reactor to study the characteristics of corona discharge plasma in air at the atmospheric pressure. At the pulsed do voltage and do voltage, we studied the changes of the characteristic of plasma by computing electron density profile according to the changes of voltage and the size of reactor. The changes of active radius from this result are compared with the data of Peek's. The numerical simulation results for a corona discharge plasma explain the physical mechanism of the discharge process and could be used to obtain the optimized parameters for designing the plasma reactor for pollution abatement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.180-180
• /
• 2018

가능최대강수량(PMP)은 대규모 수공구조물의 설계 시 기준이 되는 강수량으로, 최근 대규모 거대재난에 대비한 대피계획수립에 PMP를 활용하려는 움직임이 있으며 PMP에 대한 국내 연구가 활발히 수행되고 있다. PMP를 추정하기 위해 Hershfield의 통계적 방법에 대한 간단한 대안이 제안되었다. PMP는 물리적인 강우량 상한계로, 확률론적 개념과는 모순적이다. 또한, Hershfield의 PMP는 연 최대 시계열 평균의 선형함수로 주어지는 모양 매개변수를 가지는 GEV 분포의 약 60,000년 빈도임이 밝혀졌다. 따라서 본 연구에서는 Hershfield의 방법을 확률론적으로 해석하는 것이 바람직할 것으로 판단하였고, 기상청 ASOS 및 AWS 자료를 이용하여 우리나라 각 지점자료 중 10년 이상의 자료를 사용하여 Hershfield 방법을 적용하여 PMP를 산정하였다. 각 지점의 빈도계수를 구하여 우리나라 자료에 적합한 확률분포의 형태를 적용하였고, 분포형의 매개변수 값을 추정하였다. 또한, Hershfield의 빈도계수와, 우리나라 자료에 해당하는 빈도계수가 몇 년 빈도로 계산되는지 각각 확인해 보았다. ASOS 및 AWS 자료를 이용하여 연 최대 강수량 시계열 평균과 모양 매개변수의 관계 공식 또한 구성하였다. 본 연구의 방법을 검증하기 위하여 우리나라에서 제일 오래된 자료(57년)인 서울지점 자료를 이용하여 경험적인 분포함수와 본 연구에서 제안하고 있는 방법을 비롯한 다양한 방법을 통하여 구한 분포함수를 비교하여 도시하였다.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.53-65
• /
• 2004

This study aimed to analyze the historical evolution of general ideas concerning the particles that represent matter properties and matter changes divided into physical change and chemical change. In the science historical viewpoint, the general ideas of the base that represent matter properties has been variously revised the 5types. The definition of the matter change have also changed the 3 types. From the analysis of the definitions in secondary school science textbooks and general chemistry textbooks, we found that a lot of confusion of eras in the contents that define the concepts. Sometimes, the definition presented in one textbook was contradictory to the definitions in other textbooks. This tendency has been sustained in the textbooks from the 4th to 7th science curriculum.

• Korean Journal of Cognitive Science
• /
• v.24 no.3
• /
• pp.237-270
• /
• 2013

Determinism and compatibilism have thought that libertarianism contradicts the scientific view. This paper demonstrates that the hypothesis that free will exists does not cause any problems and contradictions, while maintaining pro-scientific view. Rather, determinism lacks scientific and demonstrative bases. At first, I reject dualistic self by assuming identity theory of the self and physical body & brain. Free will is a functional concept or property that can have multiple realization. Therefore we can recognize whether aliens or robots have free will through observation on their acts. 'Free will' is a functional kinds term like 'digestion'. As we know we have digestive function, we can know that we have free will even before knowing the necessity of its existence by understanding micro structure of human free will. The judgement that an individual has free will function depends on whether it has particular actions. Those actions are controlling and restraining actions in context, predicting future, making elaborate conditional sentences, etc. Real being of free will is the physical occupant of the function that makes those actions. Determinism is based on various kinds of misconceptions and misunderstandings. Determinists often confuse necessity of physical law and determinism. Another decisive misunderstanding is that free will postulates same conditions and different results from the same point of time. However, free will postulates that the two points of time are different. Because determinism is unnecessary redundant hypothesis influenced by religions, according to Ockham's Razor, determinism should be eliminated.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.90-97
• /
• 2011

The availability of computers and the wide network of the internet of the 'Information Society' has created a new space: Cyberspace. In this situations, the matters of individual identities and morality are more important problems. Korean classical novel, Gu Wun Mong, embodied the exploration process of identities in virtual spaces, has gravity of a situation. Seong Jin, the hero experienced the life of Yang so you went throughing virtual life, be born again. And he met eight taoist fairy in that virtual world. In this process, Seong Jin overcame a dualistic world of view and established identity of genuine truth-seeker. The 'Dream-fantasy' experience differentiation real world and virture world and give to Seong Jin a new identity, So You. Seong Jin used avatar, So You was free from limits of self and became obtain multiple personalities. Finally, Seong Jin realized the fact that real world and virtual one is the same, for development self-perception. Seong Jin's enlightment provided solutions for modern netizens, who is ambivalent about contradiction the real and virtual, infinity and clash of desire.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.67-80
• /
• 2006

This paper presented an application of the geotechnical hybrid-online simulation to the consolidation settlement problem of soft clay. Conventional numerical analyses have used idealized soil constitutive models obtained from the laboratory soil tests. On the other hand, in the hybrid-online simulation, soil response was directly introduced to numerical analyses from the soil element test, and, therefore, the complicated parameter estimation was not required in this method. Fundamentals of the hybrid-online simulation method and the development of the algorithm and corresponding hardware and software for the system were presented in this study. Furthermore, an incremental loading consolidation and the hydraulic conductivity test and a comparative study using the Terzagh's conventional consolidation theory were carried out for the system verification including the performance of the experimental device and source coding of software components, and the data reliability obtained from the system. In conclusion, we found that the hybrid-online consolidation simulation system could reproduce the consolidation behavior of the remolded Kaolinite specimen withoutany discrepancies.