• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.77-81
• /
• 2010

The effects of $CO_2$ concentration on fruit-body formation and yield of Pleurotus ferulae (KME65003) mushroom were examined in the growing facilities for bottle cultivation. The $CO_2$ concentration levels in the growing facilities were 500 ppm, 1000 ppm, 1500 ppm and 2000 ppm of $CO_2$, controlled by different ventilation amount. Yield of fruit body was highest of 102.4 g/bottle at 1000 ppm treatment and lowest of 75.1 g/bottle at 2000 ppm. As the $CO_2$ concentration increased up to 2000 ppm, the first pinhead formation and fruit-body growing period took longer, so total growing period took 16 days at 500 ppm, but 23 days at 2000 ppm. The number of pinhead formation was highest of 12.2/bottle at 1500 ppm and valid stipes was highest of 2.8/bottle at 1000 ppm. Fruit body characteristics such as pileus and stipe diameter, and stipe length were not significant at different $CO_2$ concentration. The fruit body ratio of 20~50 g range among the whole fruit body which was classified by weight was highest of 60.3% at 1000 ppm. As a result, the suitable $CO_2$ concentration of growth and yield of Pleurotus ferulae was showed as 1000 ppm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1448-1453
• /
• 2012

Fried fish pastes containing different size and amounts of red ginseng powder (RGP) were manufactured, and their physico-chemical and biological properties, including color changes, preservation, weight loss after heating, lipid oxidation, and total colony count were analyzed to improve fish paste quality. Sensory evaluation of fish pastes containing RGP was carried out, and the results showed that 1% and 850 ${\mu}m$ sized RGP additives were most preferred. In the color change test, decreased $L^*$ (lightness), increased $a^*$ (redness), and increased $b^*$ (yellowness) values were observed, which was similar to other additive-containing commercial fish pastes. In the physical properties test, hardness and chewiness significantly increased in the 90 ${\mu}m$ sized RGP group. Weight loss of fish pastes containing RGP after heating was attenuated compared to commercial fish pastes. Fish paste containing RGP showed an inhibitory effect on lipid oxidation. Especially, the 10 ${\mu}m$ sized RGP group showed the most significant inhibitory effect on lipid oxidation and reduced total microbes during storage. Therefore, 1% addition of RGP can give rise to high quality fish pastes through improvement of sensory evaluation and physico-chemical properties. Moreover, functionally and physiologically improved fish pastes can be produced by adding different amounts of RGP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.681-686
• /
• 2012

This study conducted autoclave and microwave treatments on dough to determine if there were any changes in quality after the dough was cooked into bread. Wheat dough after secondary fermentation was treated with a microwave (1 min), an autoclave (30 min), and both an autoclave and microwave (30 min/1 min). We then measured the pH, moisture content, color, texture, and sensory evaluation. The results showed that pH was slightly decreased when it was treated in an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). When microwaved and baked, the moisture content most decreased compared to the control. In crust color, there were no considerable differences in lightness, redness, or yellowness compared to the control, except when microwaved (no baking). The lightness of the crumb color decreased, while redness and yellowness increased, when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). Hardness, gumminess, chewiness and shear force were significantly increased when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking) compared to the control. In the sensory evaluation, there were no considerable differences in color, aroma, taste, or overall preference when microwaved and baked. Color, aroma, shape, and overall preference were the worst when the dough was treated with autoclave/microwave (baking and no baking). These results suggest that autoclaving and microwaving may reduce the quality of bread, and countermeasures to this problem are necessary.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.434-441
• /
• 2015

To develop dough methods for improving bread making properties of Korean wheat flour, straight dough methods (SDM) and dough and sponge methods (DSM) were applied. The bread making properties such as weight of bread, specific volume, baking loss, crumb color, and texture were analyzed. In comparison of flour properties between Korean wheat flour and imported wheat flour by Farinograph, Korean wheat flour showed less gluten network form ability than imported wheat flour. The dough making method affected bread quality such as weight of bread, specific volume, and baking loss. SDM had a more desirable effect on bread quality. Crumb color was lighter in bread made with Korean wheat flour compared to imported wheat flour, whereas dough making method did not affect crumb color. In consumer acceptance analysis, bread made by DSM showed higher consumer acceptance than that made by SDM. Regarding physicochemical changes during storage, bread made by SDM using Korean wheat flour showed higher chewiness, brittleness, and hardness than that made by imported wheat flour. However, bread made by DSM showed similar chewiness as bread made by SDM using imported wheat flour. The bread making properties of bread made by DSM is improved versus that of bread made with Korean wheat flour.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.464-470
• /
• 2001

The purpose of this study was to evaluate the tensile strength of light-cured restorative posterior resin-based composites. Five commercially available light-cured composites(Denfil : DF, P60 : PS, Unifil S : US, Z100 : ZH, Z250 : ZT) were used. Rectangular tension test specimens were fabricated in a teflon mold giving 5mm in gauge length and 2mm in thickness. Specimens were subjected to the 5,000 thermal cycles between $5^{\circ}C$ and $55^{\circ}C$ and the immersion time in each bath was 15 second per cycle. Tensile testing was carried out with Instron at a crosshead speed of 0.5mm/min and fractured surface were observed with scanning electron microscope. The obtained results were summarized as follows; 1. The tensile strength of PS was highest. PS was significantly higher than DF, US and ZH(p<0.05) but in the case of ZT was similar to PS(p>0.05). 2. The tensile strength DF was lowest. DF was significantly lower than PS, US, ZH and ZT(p<0.05). 3. The tensile strength of US and ZH were significantly lower than PS and ZT(p<0.05). but were significantly higher than DF(p<0.05). The tensile strength of US and ZH were similar(p>0.05).

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.75-82
• /
• 2011

Five different composition UV-cured poly(urethane acrylate-co-acrylic acid) (PU-co-AA) films have been prepared by reacting isophorone diisocyanate(IPDI), polycaprolactone triol(PCLT), 2-hydroxyethyl acrylate(HEA), and different weight ratio trimethylolpropane triacrylate(TMPTA) and acrylic acid(AA) as diluents, and characterized using a Fourier transform infrared spectroscopy(FT-IR). The adhesion properties onto the stainless steel, morphology, mechanical hardness, and electrical property of UV-cured PU-co-AA films were investigated as a function of acrylic acid(AA) content. All the PU-co-AA films are structure-less and the molecular ordering and packing density decreased with increasing content of AA due to the flexible structure and -COOH side chains in AA. The crosscut test showed that PU-co-AA films without AA and with low content of AA showed 0% adhesion(0B) and the adhesion of PU-co-AA films in the range of 40-50% AA increased dramatically as the content of AA increases. The pull-off measurements showed that the adhesion force of PU-co-AA films to stainless steel substrate varied from 6 to 31 kgf /$cm^2$ and increased linearly with increasing AA content. The mechanical hardness also decreased as the content of AA increases. This may come from relatively linear and flexible structure in AA and low crystallinity in PU-co-AA films with higher content of AA. The higher AA-containing PU-co-AA films showed higher dielectric constant due to the increase of polarization by introducing AA monomer. In conclusion, the physical properties of UV-cured PU-co-AA films are strongly dependent upon the content of AA and the incorporation of AA in polyurethane acrylate is very useful way to increase the adhesion strength of UV-curable polymers on the stainless steel substrate.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.766-773
• /
• 2013

A transparent film was fabricated based on bacterial cellulose (BC), BC has excellent physical strength and stability at high temperature and it is an environmental friendly flexible material. In order to improve the conductivity, silver nanowire (AgNW) and/or graphene were introduced to the BC membrane. The aspect ratio of the AgNW synthesized in this study was 214, with a length of $15{\mu}m$ and width of 70 nm. The higher aspect ratio improved the conductivity by reducing the contact resistance. The thermal and electrical properties of 7 types of films prepared were investigated. Each film was fabricated with rectangular shape ($2mm{\times}2mm{\times}50{\mu}m$). The films were scored with a net shape by a knife, and filled with AgNW and graphene to bestow conductivity. The film filled with AgNW showed favorable electrical characteristics with a thickness of $350{\mu}m$, electron concentration of $1.53{\times}10^{19}$, electron mobility of $6.63{\times}10^5$, and resistivity of 0.28. The film filled with graphene had a thickness of $360{\mu}m$, electron concentration of $7.74{\times}10^{17}$, electron mobility of 0.17, and resistivity of 4.78. The transmittances at 550 nm were 98.1% and 80.9%, respectively. All the films were able to light LEDs bulbs although their brightness differed. A thermal stability test of the BC and PET films at $150{\pm}5^{\circ}C$ showed that the BC film was more stable, whereas the PET film was quickly banded. From these results, it was confirmed that there it is possible to fabricate new transparent conductivity films based on BC.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.1
• /
• pp.16-26
• /
• 2000

Physical characteristics and nutrient distributions in seawater were investigated to understand the mechanism of red tide outbreak in coastal waters off Kohung area. To identify any physical and chemical differences before, during and after the red tide outbreaks, 6 times of field observations have been carried out from May to October, 1997. We found that major environmental properties of the seawater in the study area were determined not by the local meteoric conditions or nearby-land influences, but by the intrusion of seawater from offshore. In particular, extreme environmental variations in seawater were found during the period of red tide outbreak from August to September. Before the red tide outbreak, high concentrations of DIN(Dissolved Inorganic Nitrogen)were found in seawater, but they decreased during the outbreak. Whereas no significant variations of DIP(Dissolved Inorganic Phosphate) were found. For the water mass in the semienclosed northern part of the study area, local nutrient sources originated from nearby-lands were estimated to cover 70% of total DIN input, but the rest part of the water mass in the study area, sporadic intrusion of offshore water mass could account for the major source of DIN supply. An offshore water mass influenced by Yangtze river effluent was suggested as one of the candidates with its high nitrate contents, high seawater temperature and low salinity. A red tide related phytoplankton, Gyrodinium impudicum, was found in seawater on the 21th day of August and, on the same day, a unique water mass with high temperature and extremely low salinity suddenly appeared in the study area. On the 22th day of September, after one and half month duration of red tide we found that red tide had disappeared simultaneously with the intrusion of new water mass with different characteristics.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.431-440
• /
• 2015

This study was performed to evaluate the quality characteristics of sausages after addition of lentil and Opuntia ficus-indica ethanol extract. Seven sausages were prepared as follows : F0 (control), F1 (5% lentils), F2 (5% lentils + 1% Opuntia ficus-indica), F3 (5% lentils + 3% Opuntia ficus-indica), F4(10% lentils), F5 (10% lentils + 1% Opuntia ficus-indica), and F6 (10% lentils + 3% Opuntia ficus-indica). Addition of lentils increase dietary fiber and starch in sausage while lowering fat content. Starch is used in manufacturing sausage to stabilize and increase viscosity. Opuntia ficus-indica contains dietary fibers and therefore addition of it to sausage increases dietary fiber, much like lentil addition. Lightness decreased and yellowness increased in all treatments. Redness was lowered by lentil addition but enhanced by addition of Opuntia ficus-indica. Redness in F3 and F5 were similar with control. But, F5 was more similar with control in all colors. Addition of lentil and Opuntia ficus-indica improved texture in hardness, springiness, gumminess, and chewiness. In sensory evaluation, color was lowered but taste was heightened by adding lentil and Opuntia ficus-indica extract. From results of this study, we could conclude that addition of mixture of lentil and Opuntia ficus-indica made sausage low in fat, with high in dietary fibers and starch. In addition, texture was increased and taste was better. F5 had the most similar color to control. We found out the optimal amounts of the two ingredients, lentil and Opuntia ficus- indica extract, were 10% and 1%, respectively.