• Journal of Environmental Impact Assessment
• /
• v.31 no.1
• /
• pp.63-74
• /
• 2022

In orderto understand the urban thermal conditions, many studies have been conducted to estimate the thermal fluxes. Currently sensible heat fluxes are estimated through various methods, but studies about comparing the differences between each method are very insufficient. Therefore, this study try to estimate the sensible heat flux of the same area by two representative estimation methods and compare their results to confirm the significance and limitation between methods. As a result of the study, the heat balance methods has a great advantage in terms of resolution but it can not consider the anthropogenic heat flux, so sensible heat flux can be underestimated in urban areas. When estimating based on physical equation, anthropogenic heat flux can be considered and the error is relatively small, it has a limitations in time and space resolutons. The two methods showed the largest difference in industiral areas where anthropogenic heat fluxes are high, with an average of 135 W/m² and a maximum of 400 W/m². On the other hand, the green and water have a very small difference with and average of 20 W/m². The results between two methods show significant differences in urban areas, it is necessary to select a suitable method for each research purpose.

• Journal of Wetlands Research
• /
• v.25 no.1
• /
• pp.64-73
• /
• 2023

Before 2022, there was a lot of confusion in the process of planning and implementing the projects for ecological restoration of the stream due to dualization the principal agent of stream management. Because the Ministry of Environment took charge of the project in 2022, securing the health of aquatic ecosystem of stream became an essential factor in the project. Therefore, in this study, the streams that require the project for ecological restoration was selected in Han River estuary, where it is essential to secure the health of the stream aquatic ecosystem as blackish water zone and Ramsar wetland are located. Physical, chemical, spatial/humanistic, health of aquatic ecosystems evaluation indexes were calculated based on the detailed facts and figures of the project for ecological restoration of the stream in the beginning. Ranking, re-scaling, z-score, and t-score normalization methods were applied to the calculated evaluation index, and the values were compared and analyzed. After that, the entropy weight method was applied to each evaluation index. Through this process, the streams(Mokgamcheon, Anyangcheon etc.) that require the project for ecological restoration were selected for the purpose of securing the health of the aquatic ecosystem in Han River estuary. The result of this study can be used as basic research data in the process of selecting the priority determination of the projects for ecological restoration of the stream.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.411-426
• /
• 2022

Energy plays a significant role in modern lifestyle because of our extensive reliance over energy-operating devices. Therefore, there is a need for alternative and green energy resources that can fulfill the energy demand. For this, fuel cell (FCs) especially anion exchange membrane fuel cells (AEMFCs) have gained tremendous attention over the other (FCs) due to their fast reaction kinetics without using noble catalyst and allow to use of cheaper polymers with high performance. But lack of highly conductive, chemically, and mechanically stable anion exchange membrane (AEM) still main obstacle to the development of high performance AEMFCs. Therefore, graphene-based polymer composite membranes came into the existence as AEMs for the FCs. The exceptional properties of the graphene help to improve the performance of AEMs. Still, there are lot of challenges in the graphene derivatives based AEMs because of their high tendency of agglomeration in polymer matrix which reduced their potential. To overcome this issue surface modification of graphene derivatives is necessary to restrict their agglomeration and conserved their potential features that can help to improve the performance of AEM. Therefore, this review focus on the surface modification of graphene derivatives and their role in the fabrication of AEMs for the FCs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.305-305
• /
• 2023

수문조사기기 검정은 강수량, 수위, 유량 등과 같은 수문자료를 관측하는 수문조사기기가 대상지역의 수문상황을 정확하게 관측하는지를 검사하는 일련의 과정으로 「수자원의 조사 계획 및 관리에 관한 법률」 제12조에 법적 기반을 두고 있다. 검정 대상은 강수량, 수위, 유속, 유사량, 토양수분량, 증발산량, 증발량 측정기기 총 7종이며, 환경부장관으로부터 한강홍수통제소가 검정업무를 위임받고, 한국건설기술연구원과 한국수자원조사기술원이 위탁받아 운영중에 있다. 최근에는 증발산량, 토양수분량 및 유량 측정기기기 등이 첨단화되어 기존 검정 방식에 대한보완 및 신설에 대한 요구가 증가하고 있다. 특히, 유량 측정시 기존에 사용하였던 회전식 유속계는 ADCP(Acoustic Doppler Current Profiler) 유량측정기기로 대체되어 활용률이 2013년 24%에서2021년 67%로 약 2.8배 급격히 증가하였다. 하지만 수문조사기기 검정 관련 고시 내 ADCP에 대한검사방법 및 허용오차 등의 규정이 부재하여 수문조사기기의 검정 공백이 발생하는 등의 문제가 존재하고 있다. 이에 본 연구에서는 ADCP 운영 및 기술 현황, 현행 법령, 국외 사례 등을 검토하여 ADCP 유량측정기기의 검사방법 및 허용오차에 대한 방안을 제시하고자 한다. ADCP 검사방법은 총 5단계로 외관검사, 자가진단 검사, 온도센서 검사, 수심측정 검사, 유량비교측정 검사에 따라 검정을 실시한다. 첫 번째 외관검사시에는 기기 외관과 센서 등 물리적 손상을 점검하고, 두 번째 자가진단 검사에서는 센서 변환 매트릭스 값, 수신부 센서 테스트, RAM/ROM 테스트, 통신 테스트 등에 관한 정상값 산출 여부를 확인한다. 세 번째 온도센서 검사에서는 검증용 온도센서를 이용한 값과 ADCP에 부착된 온도센서 값과 차이를 확인하고 ±2℃초과시 재검사 또는 적절한 조치를 취한 후 다음 단계의 검사를 진행한다. 네 번째 수심측정 검사에서는 수조 내 수심 측정을 확인하여 실제 수심과의 오차를 확인하고 ±1% 초과시 재검사 또는 적절한 조치 후 다음 검사를 실시한다. 유량비교 측정검사에서는 각 기기 간의 평균유량의 상대오차를 평가하는 것으로 ±5%미만에는 합격, ±5이상 ±10%미만에서는 재검사, ±10%이상에서는 공장수리를 권고하도록 하고, 1~5 단계의 검사를 통과한 기기를 대상으로 인증서를 발급하도록 한다. 유량비교 측정검사시에는 매년 ADCP를 사용하는 일반기업 및 공공기관 등이 모여 ADCP의 성능을 상호간 비교하는 'ADCP 기술협력 워크숍'을 확장하여 실시할 수 있다. 각 검사 단계의 허용오차는 USGS 또는 제조사 기준과 2022년 ADCP 기술협력 워크숍 성능검사 분석 결과를 토대로 하였다. 본 ADCP 검정 방안은 향후 ADCP 모델별로 단계별 시범 검토를 통해 세부사항에 대한 제시가 필요하며, 온도센서 검사, 수심측정 검사, 유량 비교측정검사에 대한 허용오차에 대한 타당성에대한 검증 및 검토가 이루어져야 할 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.514-514
• /
• 2023

댐 건설은 하천의 유황, 유사량을 변화시켜 이·치수 및 생태계에 영향을 미치고 있다. 그러나 현재 댐 운영에 사용하고 있는 하천 기본계획은 10년마다 수립하고 있어 하천 지형 측량자료, 식생 및 수생태를 고려한 하천 관리 계획은 대부분 과거자료이다. 또한 홍수소통에 영향을 미치는 하도식생에 대한 연구가 거의 없어 최근 기후변화로 인해 빈번하게 발생하는 홍수 등 물재해에 적극적 대응이 어려운 실정이다. 따라서 최신의 하천 기초조사 자료 기반, '20년 댐 하류하천에 홍수가 발생한 4개 댐(대청, 합천, 용담, 섬진강댐)을 대상으로 하상변동, 식생 영향 등을 고려한 댐 직하류 하천관리방안을 마련하는 연구를 진행하였다. 최신 하천 기초조사 자료 확보를 위해 하천기본계획 등 문헌정보를 수집하고 댐 직하류의 수중부·육상부 측량, 유사량·하상재료 조사, 식생조사, 홍수흔적조사 등을 실시하였다. 확보한 기초자료를 바탕으로 하상변동 분석 모델 및 물리적 서식처 모의 모델을 통해 이수, 치수, 생태 측면으로 분석을 진행하였다. 이수 분석으로 HEC-RAS의 유사이송 분석을 통해 현재부터 20년 뒤의 하상변동을 분석하였다. 치수 분석으로 HEC-RAS 2D 등의 유사이송 분석을 사용하여 한 개의 홍수기 사상 발생 시 하상변동을 분석하였으며, 식생의 유무가 하상변동에 미치는 영향을 함께 분석하였다. 생태 분석으로는 PHABSIM을 사용하여 대상어종에 대한 하상변동 및 식생 유무에 따른 환경생태영향의 영향을 분석하였다. 분석을 바탕으로 각 대상 댐 직하류에 이수, 치수, 생태 측면의 하천관리방안을 수립하였다. 이수 분석을 통해 20년 뒤의 취양수장의 제약수위를 예측, 검토하고 취약구간 모니터링 구간을 산정하였다. 또한 침식과 퇴적이 크게 일어나는 구간을 산정하여 장·단기 하상변동 모니터링 구간을 제시하였다. 치수 분석을 통해 식생이 댐 하류에 미치는 영향을 분석하여 식생 저감 구간을 선정하는 등 적정 식생 밀도 조절 방안을 제시하였다. 또한 하상변동량이 큰 구간은 하상 안정 유지를 위한 수제 설치를 모델 결과를 통해 검토하였으며 제방 정비가 필요한 구간은 드론을 활용한 모니터링을 제안하였다. 생태 분석을 통해 대상 어종이 서식하기 가장 적합한 환경생태유량을 산정하고 댐 하류 하천의 자연성 회복을 위한 증가방류, 유사환원 등의 방안을 검토하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.41-46
• /
• 2023

Human urine is a process of excreting waste products in the blood, and it is easy to collect and contains various substances. Urinalysis is used to check for diseases, health conditions, and urinary tract infections. There are three methods of urinalysis: physical property test, chemical test, and microscopic test, and chemical test results can be easily confirmed using urine test strips. A variety of items can be tested on the urine test strip, through which various diseases can be identified. Recently, with the spread of smart phones, research on reading urine test strips using smart phones is being conducted. There is a method of detecting and reading the color change of a urine test strip using a smartphone. This method uses the RGB values and the color difference formula to discriminate. However, there is a problem in that accuracy is lowered due to various environmental factors. This paper applies a deep learning model to solve this problem. In particular, color discrimination of a urine test strip is improved in a smartphone using a lightweight CNN (Convolutional Neural Networks) model. CNN is a useful model for image recognition and pattern finding, and a lightweight version is also available. Through this, it is possible to operate a deep learning model on a smartphone and extract accurate urine test results. Urine test strips were taken in various environments to prepare deep learning model training images, and a urine test service application was designed using MobileNet V3.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.266-269
• /
• 2022

As the emotional problems experienced by modern people after COVID-19 have increased, the burden on clients due to negative perceptions of psychological counseling and physical limitations is still high. Therefore, this study proposes a virtual counseling platform for effective counseling using the characteristics of people in their 20s who are open to relationships in non-face-to-face relationships. To this end, a survey was conducted for those in their 20s and in-depth interviews with counselors were conducted. After that, a 3D virtual counseling environment was created through Unity to PC-based service. As a result of the study, it was found that the most important factor in counseling in the 20s was the tendency of counselors and an atmosphere without burden, which was closely related to self-opening in counseling. Therefore, it was possible to participate in counseling while looking at the counselor character in a 3D space created in comfortable atmosphere, and various interaction elements with the counselor were provided during counseling. The significance of this study aims to promote self-openness of clients in their 20s and actively participate in counseling. This is expected to greatly help improve psychological problems through smooth counseling.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.98-110
• /
• 2023

The smart city public and private partnership project is a project to build and operate a sustainable city by investing land and capital in public-private partnership to build urban infrastructure and providing various urban services. It highly depends on the precise feasibility study and the projection of the various factors affecting the project during the planning stage to get the project successful. However, it is very difficult to predict the possibility of the project success in advance due to various physical and social factors. It is necessary to derive factors affecting the project at the planning stage and respond with appropriate analysis in order to solve these problems and to carry out a successful project. Therefore, this study derived preliminary components for feasibility study through previous studies and order status analysis and presented feasibility study components such as five-step processes, 10 process items, 19 analysis items, and 54 detailed analysis items through the Delphi method. It can be expected that this research is to contribute corresponding to diversified possible risks and facilitate the projects during the promotion.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.15-25
• /
• 2023

Since the COVID-19 crisis, the use of disposable packaging materials and delivery services, which raise environmental and social issues with waste disposal, has significantly increased. Antimicrobial active packaging has emerged as a viable solution for extending the shelf-life of foods by minimizing microbial growth and decomposition. In this review article, we provide a comprehensive overview of current research trends in antimicrobial active film and coating published over the last five years. First, we introduced various polymer materials such as film and coating that are used in active packaging. Next, various types of antimicrobial (antibacterial, antifungal, and antiviral) packaging including essential oil, extracts, biological material, metal, and nanoparticles were introduced and their activities and mechanisms were discussed. Finally, the current challenges and prospects were discussed. Overall, this review provides insights into the recent advancements in antimicrobial active packaging research and highlights the potential of the technology to enhance food safety and quality.