• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.587-591
• /
• 2013

Poly(3,4-ethylenedioxythiophene) (PEDOT) has good properties such as high conductivity, optical transmittance, and chemical stability, while offering relatively weak physicochemical properties. The main purpose of this paper is the improvement of physicochemical properties such as solvent resistance and pencil hardness of PEDOT. Carboxyl groups in the anionic type waterborne polyurethane (WPU) chains can effectively crosslink each other in the presence of aziridine, resulting in physicochemically robust PEDOT/WPU organic-organic hybrid conductive thin films. The electrical conductivity, optical properties, and physicochemical properties of the hybrid conductive film were compared by varying the solid content and WPU portion in the coating precursor solution. From the results, the transparency and surface resistance of the hybrid film show a decreasing tendency with increasing solid content in the coating precursor. Moreover, solvent resistance and hardness were dramatically enhanced by hybridization of PEDOT and crosslinked WPU due to curing reactions between carboxyl groups.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.16-26
• /
• 1989

Diffraction patterns of electromagnetic fields for the incidence of E-polarized plane wave on both interfaces of an arbitrary-angle dielect wedge are obtained by sum of geometric optics term and the edge diffracted fields. The diffraction coefficients of the edge diffracted fields are evaluated by employing the physical optics approximation and then correcting its error with the multipole line source at the dielectric edge. For the wedge angle $120^{circ}$, the incident angle $60^{circ}$, the relative dielectric constant of the dielectric wedge, 2, 5, and 10, and the observation distance from the tip of the wedge, 5 and 10 wavelength, the diffraction coefficients and the diffraction patterns corresponding to geometric optics, physical optics, and the solution corrected by the multipole line source are plotted, respectively. While the corrected solutions presented in this paper are valid only in the far-field region, these asymptotic solutions show to satisfy the boundary condition on the dielectric interfaces.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.29-34
• /
• 2005

본 연구는 청계천의 구성요소에 대해 경관연출효과를 분석하기 위해 주요구성요소 4곳을 상대로 경관현황을 조사하였다. 도시에서의 빛연출은 도시의 아이덴티티를 형성하고 또한 청계천 같이 6km에 다다른 하천은 관광자원으로써도 활용된다. 따라서 청계천 빛환경을 분석하기 위해 경관에 있어서 조명학적으로 중요한 물리량 평가요소로 휘도, 색도, 색온도를 선정하였다. 디지털 광학 계측기인 Radiant Imaging Prometric 1400에 의해 측정된 휘도, 색도, 색온도 등의 물리량 측정결과 주야간 모두 주변과 조화를 이루고 있는 것으로 나타났으며, 휘도대비가 16:1을 넘지 않아 시각적으로도 적절한 것으로 판단됐다. 따라서 청계천 주요수성요소의 경관연출은 주 야간 모두 이용자들에게 안락한 경관을 제공할 것으로 사려된다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1457-1458
• /
• 2006

좁은 공간에 고출력 고에너지 레이저를 집속할 때 발생하는 고밀도, 고에너지 플라즈마 연구는 상태방정식, 실험실 천체물리, 전자가속 둥 기초 분야 뿐 아니라 X-선 및 극자외선 광원 개발, 원전 유지보수 등 다양한 산업 활용 분야를 갖고 있어 최근 미국, 프랑스, 일본, 중국 등 선진강대국에서 크게 주목 받고 있는 연구 분야이다. 한국원자력연구소는 물리나 광학의 원천기술 뿐 아니라 미래 산업에 파급효과 큰 플라즈마 기반 연구를 위하여 1 kJ급 고에너지 Nd:Glass 레이저 시설을 구축하고 있다.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2007

Tunnel management is a time-consuming and expensive task. In particular, visual analysis of tunnel inspection often requires extended time and cost and shows problems on data gathering, storage and analysis. This study proposes a new approach to extract information for tunnel management by using a laser scanning technology. A prototype tunnel laser scanner developed was used to obtain point clouds of a railway tunnel surface. Initial processing of laser scanning data was to separate those laser pulses returned from the installations attached to tunnel liner using radiometric and geometric characteristics of laser returns. Once the laser returns from the installations were separated and removed, physically damaged parts on tunnel lining are detected. Based on the plane formed by laser scanner data, damaged parts are detected by analysis of proximity. The algorithms presented in this study successfully detect the physically damaged parts which can be verified by the digital photography of the corresponding location on the tunnel surface.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.35-38
• /
• 2005

The computational fluid dynamic analysis has been conducted for the thermo-chemical flow field in an arcjet thruster with mono-propellant hydrazine ($N_{2}H_4$) as a working fluid. Coupled Reynolds Averaged Navier-Stokes (RANS) equations and Maxwell equations were used to account for the Ohm heating and Lorentz forces. Hydrazine chemistry and thermal radiation were also incorporated to the fluid dynamic equations by assuming infinitely-fast reactions and optically thick media. In addition to the thermo-physical understandings of the flow field inside the arcjet thruster, results shows that performance indices are improved by amount of $20\%$ in thrust and $200\%$ in specific impulse with the 0.6kW are heating.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.583-590
• /
• 2004

The autofocus is one of the important processes in the automated vision inspection or measurements using optical microscopes, because it influences the measuring accuracy. In this paper, we used the confocal microscope configuration based on not a pinhole but a single-mode optical fiber. A single mode fiber has the functions of source and detector by applying the reciprocal scheme. As a result, we acquired a simple system configuration and easy alignment of the optical axis. Also, we embodied a fast autofocus system by acquiring the focus error signal through a source modulation technique. The source modulation technique can effectively reduce physical disturbances compared with objective lens modulation, and it is easily applicable to general optical microscopes. The focus error signal was measured with respect to the modulation amplitude, reflectance of the specimen and inclination angle of the measuring surface. The performance of the proposed autofocus system was verified through autofocusing flat mirror surface. In addition, we confirmed that source modulation rarely degrades the depth resolution by the comparison between the FWHMs of axial response curves.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.584-587
• /
• 2017

In this paper, the radar cross section of the integrated mast module for battleship is analyzed. The computation program based on physical optics and physical theory of diffraction is developed and the computed results are compared with those of commercial simulator to check the accuracy of computations. The radar cross section is calculated in terms of the mast shape, incident angle, and polarization. The radar cross section can be reduced through the change of the mast slope and the chamfered mast, which can be applied to a mast with a low radar cross section.

• The Optical Journal
• /
• s.158
• /
• pp.58-60
• /
• 2015

드론이 인기다. 드론이 뜨고 있다. 드론은 왜 인기인가? 왜 드론이 인기인지를 인식해보아야 한다. 결론부터 이야기하면 드론이 인기인 이유는 드론이 MMM이기 때문이다. MMM은 필자가 2년 전 쯤에 만든 신조어로 Multipurpose Mobile Machine의 약자다. 다목적 이동 기계라는 말이다. 우리말로 줄이면 다이기(多移機)쯤 된다. 드론은 다목적 이동 기계, 즉 다이기이다. 인터넷이 군용으로 사용되다가 민간이 사용하게 된 것처럼 드론 역시 정찰, 감시, 폭격 등의 군사용으로 출발했지만, 민간이 사용하는 드론의 용도는 무척 다양하다. 사진 촬영, 영화 제작, 드라마 촬영, 음식 배달, 씨앗의 파종과 농약의 살포, 현장 탐사, 경계 근무 등 정말 다용도에 사용되고 있다. 중요한 것은 드론 각각이 다목적으로 사용될 수 있다는 것이다. 이는 드론이 단지 물리적 기계인 것이 아니라 스마트 기계로, 스마트폰과 같은 SW중심 기기와 드론에 내장된 OS와 SW에 의한 제어를 통해 비로소 실현된다. 즉, 드론은 MMM이기도 하지만, 정확히 SMM(Smart Mobile Machine)이기 때문에 그 잠재성이 인정받고 있는 것이다. 지금까지 스마트 폰, 스마트 워치, 스마트 TV 등은 모두 스마트 기기이기는 하지만 스마트 이동 기기는 아니다. 한편, 로봇 청소기 등 기존의 가정용 로봇이나 산업용 로봇은 대부분 단일목적 이동기기이거나 다목적 고정 기계이므로, 로봇이라 부르기가 민망한 기계들이었다. 필자는 드론이 이렇듯 새로운 스마트 기기 산업과 기존의 로봇 산업이 갈 길 또는 가고 있는 길을 보여주고 있다는 점에서 관심을 갖는다. 스마트 기기 산업의 관점에서는 이제 비로소 고정형(스마트TV), 부착형(스마트 워치), 휴대형(스마트 폰) 스마트 기기 산업에서 다목적 스마트 이동 기계라는 새로운 블루 오션 창출 산업이기에 의미가 있다.