• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.125-132
• /
• 1998

경량골재 콘크리트의 내구성과 경제성에 대한 인식 부족으로 조경재료나 인공토양 둥 구조부재 이외의 분야에 사용되고 있는 국내 실정에 비해서, 구미 여러나라에서는 고강도 경량골재를 장지간 교량과 고충건물에 사용하고 있다. 경량골재 콘크리트는 구조물의 재료비 단순비교에 있어서도 경제성이 있을 뿐만 아니라, 자중감소로 인한 구조적, 기하학적 장점도 있으며, 또한 고강도 경량골재의 개발로 경량골재가 가지고 있는 여러 문제점을 해소하여 사용성과 내구성에 있어서 보통골재 콘크리트와 큰 차이가 없는 상황이다. 그러나국내에서 생산된 경량골재는 닫힌 공극보다 열린 공극을 많이 내포하고 있어 수분흡수가 많고, 특히, 동결융해에 대한 내구성에 취약한 문제점을 가지고 있다. 본 논문에서는 내동해성 향상을 위해 10종류의 고강도 경량골재 콘크리트 공시체를 제작하여 실리카 흄, 물.시멘트비, AE제, 강섬유 등을 실험 변수로 하여동결융해 실험을 수행하였다. 연구결과 실리카흄, 물.시멘트 비는 어느 정도 내동해성을 향상시키지만 근본적인 해결방안이 되지 못하며, AE제를 첨가한 공시체와 강섬유를 사용한 공시체는 동결융해 내구성 지수가 90%이상으로 측정되어 내동해성을 개선시킬 수 있는 요소로 나타났다.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2022

The purpose of this study is to evaluate the adhesion properties of polymer cement composites for crack repair of an RC structure. Polymer cement composites are manufactured from cement, three types of polymers and silica fume, and the mixture is designed by adjusting the water cement ratio and AE reducing agent so that the viscosity target of the polymer cement composites is 700mPa·s or less. According to the test results, the Type-A adhesion in tension of the polymer cement composite exceeded the adhesion standard of 1.0MPa of the polymer finishing material, and furthermore, depending on the type of polymer, the adhesion in tension was highest for SAE, followed in descending order by EVA, and SBR. In addition, the adhesion in tension of Type-B is up to 1/4.5 lower than that of Type-A, but the incorporation of silica fume shows a significant improvement in terms of adhesion in tension. Based on this study, the basic mixing design of the polymer cement composites required for viscosity and adhesive performance required for crack repair of the RC structure was completed. It could be proposed as an optimal mixing design under conditions for intermixing polymer type EVA, SAE, and P/C 80%-100%.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.177-184
• /
• 2010

When cement grout is used for waterproofing of grounds, important roles are played by fluidity, particle size and bleeding. The most important element which determines their characteristics is the water/cement ratio of grout. Moreover in order to improve the efficiency of soil permeation, micro cement with a smaller average diameter is used in addition to ordinary portland cement. Besides the mixing ratio and cement diameter, the condition of ground is also of fundamental importance in the efficiency of permeation. In order to evaluate grout in terms of permeation ability into ground, we need a field test of grounting, which is cost and time consuming. In this paper we present a laboratory test method in which the suitability and efficiency of grouts are simply and more practically tested. In Korea neither a test standard nor devices are available to simulate grouting in a laboratory. We devised a grout injection equipment in which grouting was reproduced in the same condition with different materials, and suggested a standard for the production of specimens. Our tests revealed that the efficiency of injection increases with the water/cement ratio. We also found that more efficiently injected is the grout with the order of decreasing size; MS8000, micro cement, and ultra fine cements, and colloidal super cement.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.283-290
• /
• 2009

Differently from fly ash, the bottom ash produced from thermoelectric power plant has been treated as an industrial waste matter, and almost reclaimed a tract from the sea. If this waste material is applicable to foam concrete as an aggregate owing to its light-weight, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and horizontal forces and deformations of retaining wall subject to soil pressure. This study has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was measured in terms of unit weight of concrete, air content, water-cement ratio and compressive strength. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationships between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a mix design proportion of foam concrete while bottom ash is used as an aggregate of the concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.307-313
• /
• 2022

In this study, the correlation between Half Cell Potential(HCP) and the corrosion influencing factors was analyzed with considering three levels of water-cement ratio, the concentration of chloride solution, and cover depth. As a result of long-term corrosion monitoring, HCP behavior was close to the critical corrosion potential(-350 mV) in all water-cement ratios in the case of 3.5 % and 7.0 % chloride concentration. Regarding the passed charge test in 548 curing days, the passed charge results were improved to 'Moderate' grade. Multiple regression analysis was performed to evaluate the correlation between corrosion influencing factors and HCP, and it was evaluated that the effects of influencing factors to HCP were in the order of chloride concentration, water-cement ratio, and cover depth. In the case of the relationship between HCP and the passed charge, the coefficient of determination showed a high level of 0.9, which yielded a close correlation between the passed charge and HCP.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.301-312
• /
• 2005

The present study investigated the physical changes and reaction products with setting time after mixing of various mineral admixtures such as lime, hydrated lime, gypsum, kaolin, zeolite and diatomaceous earth with four types of cement (portland cement, slag cement, quick lime, hydrated lime) and clay rich sediments in soft foundation. As results, slag cement showed the greater compressive strength than normal portland cement. The mixing experiments with various mineral admixtures and slag cement resulted that gypsum showed the greatest compressive strength. Additionally, we conducted mixing experiments with various mixing ratios of gypsum and slag cement. The experiments showed that the mixing ratio of $30\%$ gypum and $70\%$ slag cement has the greatest compressive strength. Ettringite was produced as a reaction Product. This fact indicates that gypsum effectively promotes hydration reaction and contributed to the greater compressive strength. These experimental results can be used as fundamental data for the stabilization of soft clay foundation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.565-571
• /
• 2008

Recently, the evaluation technique using NDT (Nondestructive Technique : NDT) is widely utilized because it makes little damage on RC (Reinforced Concrete : RC) structures. The techniques using electromagnetic properties (EM properties) are also attempted for the evaluation of the performance of concrete which is nonmetallic. For the economic manufacturing of concrete material, sea-sand is often used as aggregate, however, chloride ion in concrete has direct effects on steel corrosion and EM properties. In this study, OPC mortar specimens with 5 different chloride amount (0.0, 0.6, 1.2, 2.4, and $3.6kg/m^3$) and 3 different water-cement ratios (45%, 55%, and 65%) are prepared in order to investigate the EM properties corresponding to concrete properties. The EM properties of conductivity and dielectric constant are measured in the frequency range over 0.2~20 GHz. To facilitate the comparison of EM properties with chloride content, average values are taken respectively for the conductivity and dielectric constant measured over the 5~20 GHz frequency range. According to the results of this experiment, dielectric constant and conductivity are increased with lower W/C ratio and larger amount of chloride content.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.501-506
• /
• 1996

원자력발전소의 2차 냉각계통 제염 공정인 EPRI/SGOG 공정에서는 EDTA를 제염제로 사용하고 있다. EDTA는 수용액 상에서는 20$0^{\circ}C$까지 안정하며 제염후 존재하는 유리 EDTA (EDTA-2NH$_4$)는 시멘트 수화반응에 의해 생성되는 Ca이온과 결합하여 EDTA-Ca 착이온이 형성된다. 따라서 CSH(Calcium Silicate Hydrate)겔의 형성을 억제함으로써 시멘트 경화반응을 지연시킨다. 현재 우리나라에서는 EDTA가 함유한 제염폐액의 처리방법의 미결정으로 인하여 자체 저장하고 있으나 고화체의 최종 처분조건을 만족하며 감용률을 최대화 할 수 있는 처리방법이 필요하다. 본 연구에서는 유리 EDTA가 소석회의 발생을 억제시켜 경화반응에 영향을 주는 점을 고려하여 유리 EDTA 용액에 소석회로 전처리 하여 시멘트 고화한 고화체의 물성시험을 수행하였다. 연구결과 EDTA와 소석회 반응 몰비가 1이 되게 전처리할 경우 시멘트에 대한 물의 배합비는 27%이상이 되어야 하며, 유리 EDTA 함량이 20wt%인 용액에서 폐액/시멘트/소석회비가 33.4/65/1.6일때 최대의 감용률을 나타내는 건전한 고화체의 조성비를 얻었다.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.24-31
• /
• 2006

The duality of recycled fine aggregate (RS) which was produced at the waste concrete crushing was investigated. The compressive strength, flexural strength and absorption of mortar utilized with RS were examined. It was evaluated on the application of RS as precast concrete aggregate. The density and absorption of RS were $2.31g/cm^3$ and 8.07% respectively, the quality of RS was satisfied with the criterion of KS F 2573 type 2. The maximum 28days compressive strength of mortar mixed with blended cement MRS1, MRS2 and MRS3 were developed with 15.8, 27.4 and 48.7MPa respectively, in condition to curing temperature $40^{\circ}C$ and water-cement ratio 37.5%. When blended cement MRS1 and MRS2 were used, the maximum flexural strength of mortar was developed at curing temperature $40^{\circ}C$ and water-cement ratio 35.0%. When blended cement MRS3 was used, the maximum flexural strength of mortar was developed at curing temperature $40^{\circ}C$ and water-cement ratio 37.5%. The absorption of mortar mixed with blended cement MRS1, MRS2 and MRS3 were indicated the range of $8.3{\sim}7.3%,\;6.5{\sim}8.5%$ and $3.5{\sim}6%$ respectively. Therefore, when the ratio of blended cement and RS is appropriately centre]led, it would be expected that MRS1, MRS2 and MRS3 will be able to apply the variable low strength, medium strength and high strength precaste concrete.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.7-7
• /
• 2001

다량의 점토 퇴적물로 구성된 연약지반은 대단히 큰 압축성과 낮은 강도, 높은 함수량등의 물리·역학적 특성을 갖는다. 이러한 기초지반으로서의 불리한 특성 때문에 이를 대상으로 하는 각종 토목건설공사에서는 지반개량이나 안정처리가 반드시 선행되어야 할 과제이다. 이를 위해 종래에는 샌드드레인, 페이퍼드레인 등의 물리적인 공법에 의한 지반개량이 주류를 이루었으나, 최근에는 생석회나 시멘트계 고화재를 이용한 화학적 안정 처리공법이 크게 주목을 받고 있어 이에 대한 연구가 활발한 상황이다. 본 연구는 연약 지반 안정처리에 대한 방안을 모색하기 위하여 김해 지역에 분포하는 점토 퇴적물을 대상으로 각종 광물재료를 이용한 반응실험을 통하여 반응생성물 조사와 압축강도시험 등을 행하여 그 결과를 검토하였다. 우선 연약지반의 고화에 이용 가능한 생석회, 석고, 플라이에쉬, 고분자폴리머, 시멘트 등을 사용하여 점토와 혼합한 고화실험을 행하였으며, 이에 대한 물성 및 반응생성물을 검토하였다. 이러한 각 재료를 점토에 혼합한 후 PVC관에 모울딩하여 양생시켜 실험하였다. 그 결과, 석고 및 소석회에 비하여 생석회의 경우가 비교적 큰 압축강도를 나타내고, 균열발생 빈도도 낮았다. 생석회의 경우에 Gehlenite, Hillebrandite 등의 생성물질이 검출되었다. 그러나 포틀란트 시멘트와 혼합한 경우가 강도가 가장 크게 나타났다. 반면에 고분자폴리머만 사용한 경우는 강도가 매우 낮았다. 따라서 시멘트를 일정 비율로 배합한 다른 재료를 첨가한 실험을 행하여 그 물성을 검토하였다 물질의 화학적인 특성을 고려하여 포졸란반응이 잘 일어날 수 있을 것으로 생각되는 여러 재료를 선정하여 많은 조합에 대한 실험을 행하였다. 생석회, 석고, 고령토, 규조토, 제올라이트 등의 여러 재료를 여러 조합으로 첨가하여 실험한 결과, 시멘트와 석고를 혼합한 것이 비교적으로 높은 압축강도를 나타내었다. 그리고 이러한 연구 결과를 바탕으로 연약점도의 고화에 최적인 조합과 배합비를 위한 실험을 재차 실시하였으며, 실험 후의 물성과 함께 반응생성물에 대한 검토도 행하여 그 결과를 발표하고자 한다.