• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.25-33
• /
• 2002

One of the critical problems to preserve books and documents in libraries and archives is the deterioration. Some of previous results showed that the major cause of paper deterioration was the acid-catalyzed hydrolysis of the cellulose in paper fibres and aging rate of acidic paper was faster than that of alkaline paper. Therefore, It is necessary to remove the acid in the paper for reducing the rate of paper deterioration. It has been reported to extend the useful life of acidic paper by three to five times. Recently, It has been recognized the need for an effective method of deacidifying large quantities of books and document. However, in the previous many reports little attention was paid to the effect of paper additives. In this paper, We carried out experiment about the effect of additives on paper aging and the effect of deacidification by the gaseous ethanolamines (monoehtanolamine, diethanolamine, triehtanolamine). In result, it was found that the strength of aging was in the order of the alum＋rosin＞alum ＞AKD＞ control and the rate of deacidification was in the order of the monoethanolamine＞diethanolamine＞triethanolamine. The treatment with the gaseous ethanolamines caused decreasing of brightness and dropping of fold endurances. However, deacidification by combination treatment of the various gaseous ehtnaolamines prevented from decreasing of brightness and dropping of folding endurances.

• Korean Business Review
• /
• v.17
• /
• pp.53-81
• /
• 2004

The purpose of this study is to understand the realities and the subject of environmental management for small and medium-sized companies in Gwangwon area, through surveying the present status as to acquiring the certification of ISO14001, and to seek for a plan to facilitate environmental management. Given summarizing key results, those are as follows. First, while the number of companies in our country which acquired the certification of ISO14001, amounts to 1,215 businesses as of April of 2003, the number of small and medium-sized companies in Gwangwon area which obtained the certification of ISO14001 reached only 26 businesses, the lowest level among metropolitan municipalities. Second, for the reason that companies who didn't acquire the certification, strive not to receive the certification, it did present the point that' costs to be needed in acquiring and maintaining the certification are larger than practical benefit. Third, the biggest reason for either companies which did not acquire the certification of ISO14001 or companies which did (try to) acquire the certification of ISO1400, was, enhancement of a corporate image,' and the effect after a company who obtained the certification introduced the environmental management system, was also shown to be 'the improvement of a corporate image.' Fourth, many companies who acquired the certification of ISO1400 pointed out the response related to 'burden on document creation and costs' and 'lack of manpower' as problems when introducing the environmental management system. On the basis of major results of a study as the above, given presenting the subject and a plan for activating the environmental management of small and medium-sized companies in Gwangwon area, those are as follows. First, because most of companies who did not obtain the certification of ISO1400 have low recognition of ISO14001, it needs continuous and positive publicity, education and a training system. Second, it requires to carry out an educational program to nurture professional manpower due to lack of manpower relevant to environmental management, to expand payment of subsidies, to open exclusive-charge department and consulting contact, to have the relevant information be database and to develop software. Third, in order to make the certification obtained through inexpensive costs and simple procedures, it needs to positively consider the creation of public approval system for a small and medium-sized company, group approval system, industrial-complex approval system, and others.

• Journal of Intelligence and Information Systems
• /
• v.22 no.3
• /
• pp.129-142
• /
• 2016

Customer product reviews have become one of the important factors for purchase decision makings. Customers believe that reviews written by others who have already had an experience with the product offer more reliable information than that provided by sellers. However, there are too many products and reviews, the advantage of e-commerce can be overwhelmed by increasing search costs. Reading all of the reviews to find out the pros and cons of a certain product can be exhausting. To help users find the most useful information about products without much difficulty, e-commerce companies try to provide various ways for customers to write and rate product reviews. To assist potential customers, online stores have devised various ways to provide useful customer reviews. Different methods have been developed to classify and recommend useful reviews to customers, primarily using feedback provided by customers about the helpfulness of reviews. Most shopping websites provide customer reviews and offer the following information: the average preference of a product, the number of customers who have participated in preference voting, and preference distribution. Most information on the helpfulness of product reviews is collected through a voting system. Amazon.com asks customers whether a review on a certain product is helpful, and it places the most helpful favorable and the most helpful critical review at the top of the list of product reviews. Some companies also predict the usefulness of a review based on certain attributes including length, author(s), and the words used, publishing only reviews that are likely to be useful. Text mining approaches have been used for classifying useful reviews in advance. To apply a text mining approach based on all reviews for a product, we need to build a term-document matrix. We have to extract all words from reviews and build a matrix with the number of occurrences of a term in a review. Since there are many reviews, the size of term-document matrix is so large. It caused difficulties to apply text mining algorithms with the large term-document matrix. Thus, researchers need to delete some terms in terms of sparsity since sparse words have little effects on classifications or predictions. The purpose of this study is to suggest a better way of building term-document matrix by deleting useless terms for review classification. In this study, we propose neutrality index to select words to be deleted. Many words still appear in both classifications - useful and not useful - and these words have little or negative effects on classification performances. Thus, we defined these words as neutral terms and deleted neutral terms which are appeared in both classifications similarly. After deleting sparse words, we selected words to be deleted in terms of neutrality. We tested our approach with Amazon.com's review data from five different product categories: Cellphones & Accessories, Movies & TV program, Automotive, CDs & Vinyl, Clothing, Shoes & Jewelry. We used reviews which got greater than four votes by users and 60% of the ratio of useful votes among total votes is the threshold to classify useful and not-useful reviews. We randomly selected 1,500 useful reviews and 1,500 not-useful reviews for each product category. And then we applied Information Gain and Support Vector Machine algorithms to classify the reviews and compared the classification performances in terms of precision, recall, and F-measure. Though the performances vary according to product categories and data sets, deleting terms with sparsity and neutrality showed the best performances in terms of F-measure for the two classification algorithms. However, deleting terms with sparsity only showed the best performances in terms of Recall for Information Gain and using all terms showed the best performances in terms of precision for SVM. Thus, it needs to be careful for selecting term deleting methods and classification algorithms based on data sets.

• Journal of Hospice and Palliative Care
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2010

Purpose: This study was to identify the role of general hospice palliative nurse through job analysis (duties, task, and task elements). Methods: The sample consisted of 136 nurses or professors who were performing duties related to hospice care areas in Korea. A survey method was used, and the questionnaire included frequencies, criticality, and difficulties of task elements in job description by the DACUM method. Descriptive statistics were performed by using SPSS WIN 17.0. Results: The job description of general hospice palliative nurse was identified 8 duties, 36 tasks, and 137 task elements. As for the 8 duties, the average scores of frequency, criticality, and difficulty were 2.94, 3.66, and 2.80, respectively. The role of ‘pain assessment’ was the most important task element among frequency and criticality. The lowest score at the frequency and criticality were ‘manage public finance’ and ‘collect datum through diagnostic test & lab', respectively. Furthermore, the role of 'identify spiritual needs of patients and family' was the most difficult task, whereas the role of 'manage documents and information' was the least. Conclusion: In this study, we could recognize the reality of general hospice palliative nurse's performances. For general hospice palliative nurse, therefore, concrete practice guide lines of psychosocial and spiritual care, communication skills, and bereavement care with qualifying system are critically needed.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.3 s.3
• /
• pp.124-134
• /
• 2000

In construction projects, the design information, which should contain accurate product information in a systematic way, needs to be applicable through the life-cycle of projects. However, paper-based 2D drawings and relevant documents has difficulties in communicating and sharing the owner's and architect's intention and requirement effectively and building a corporate knowledge base through on-going projects due to Tack of interoperability between specific task or function-oriented software and handling massive information. Meanwhile, computer and information technologies are being developed so rapidly that the practitioners are even hard to adapt them into the industry efficiently. 3D modeling capabilities in CAD systems are enormously developed and enables users to associate 3D models with other relevant information. However, this still requires a great deal of efforts and costs to have all the design information represented in CAD system, and the sophisticated system is difficult to manage. This research focuses on the transition period from 2D-based design Information management to 3D-based, which means co-existence of 2D and 3D-based management. This research proposes a model of a compound system of 2D and 3D-based CAD system which presents the general design information using 3D model integrating with 2D CAD drawings for detailed design information. This research developed an integrated information management system for design and specification by associating 2D drawings and 3D models, where 2D drawings represents detailed design and parts that are hard to express in 3D objects. To do this, related management processes was analyzed to build an information model which in turn became the basis of the integrated information management system.

• Korean journal of food and cookery science
• /
• v.26 no.5
• /
• pp.603-616
• /
• 2010

Based on recent dramatic increases in foodborne outbreaks in restaurants, self-managed sanitation systems are now recommended to control contributing risk factors. This study aimed to improve sanitation management practices in restaurants and had two objectives. First, we tried to develop a self-managed sanitation check-list, including risk factors contributing to foodborne illness and Korean food hygiene regulation articles. We also tried to evaluate current sanitation management practices in restaurants according to operation and restaurant type. Thirty restaurants were evaluated by on-the-spot inspectors using an auditing tool consisting of four dimensions, seventeen categories, and forty-one items. Total compliance rate categorized by operation type significantly differed between chain restaurants and self-managed restaurants, with values of 85.5% and 51.6%, respectively. Therefore, self-managed restaurants, which showed the lowest compliance rate of below 30.0%, need more strict control to improve current unsanitary management practices, specifically relating to 'sterilization of knives, chopping boards, and wiping cloths', 'sanitation training', 'not allowing access into the kitchen to outsiders', 'handling of food or utensils on shelves at a 15 cm distance away from floor', 'prevention of cross-contamination of cooked foods or vegetables', and 'records of kitchen access or inspection'. Thus, an effective food sanitation system is essential and should be implemented to improve the existing sanitary conditions in restaurants. However, the most important factor to achieving food sanitation management objectives is food handlers' self-motivation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2293-2303
• /
• 2013

Objective: This study aims to determine whether national patient safety indicators (PSIs) can be calculated. Methods: Using PSI criteria from Organization for Economic Co-Operation and Development (OECD) Health Technical Papers 19 based on the Agency for Healthcare Research and Quality (AHRQ), PSIs were identified in the Korean National Hospital Discharge In-depth Injury Survey (KNHDIIS) database for 875,622 inpatient admissions between 2004 and 2008. Logistic regression was used to estimate factors of variations for PSIs. Results: From 2004 to 2008, 3,084 PSI events of 8 PSIs occurred for over 80 thousands discharges. Rates per 1,000 events for decubitus ulcer (PSI3, 4.88), foreign body left during procedure (PSI5, 0.05), postoperative sepsis (PSI13, 1.32), birth trauma-injury to neonate (PSI17, 7.92) and obstetric trauma-vaginal delivery (PSI18, 32.81) are all identified between ranges from maximum to minimum of OECD rates, respectively. However, rates per 1,000 events for selected infections due to medical care (PSI7, 0.22), postoperative pulmonary embolism or deep vein thrombosis (PSI12, 0.90) and accidental puncture or laceration (PSI15, 0.71) are below the minimum of OECD range. 7 PSIs except PSI 18 showed statistically significant relationship with number of secondary diagnoses. When adjusting patient characteristics, there are statistically significant different rates according to bed size or location of hospitals. Conclusion: This is the first empirical study to identify nationally number of adverse events and PSIs using administrative database. While many factors influencing these results such as quality of data, clinical data and so on are remain, the results indicate opportunities for estimate national statistics for patient safety. Furthermore outcome research such as mortality related to adverse events is needed based on results of this study.

• Journal of Intelligence and Information Systems
• /
• v.17 no.1
• /
• pp.139-152
• /
• 2011

Recommender systems have become an important research field since the emergence of the first paper on collaborative filtering in the mid-1990s. In general, recommender systems are defined as the supporting systems which help users to find information, products, or services (such as books, movies, music, digital products, web sites, and TV programs) by aggregating and analyzing suggestions from other users, which mean reviews from various authorities, and user attributes. However, as academic researches on recommender systems have increased significantly over the last ten years, more researches are required to be applicable in the real world situation. Because research field on recommender systems is still wide and less mature than other research fields. Accordingly, the existing articles on recommender systems need to be reviewed toward the next generation of recommender systems. However, it would be not easy to confine the recommender system researches to specific disciplines, considering the nature of the recommender system researches. So, we reviewed all articles on recommender systems from 37 journals which were published from 2001 to 2010. The 37 journals are selected from top 125 journals of the MIS Journal Rankings. Also, the literature search was based on the descriptors "Recommender system", "Recommendation system", "Personalization system", "Collaborative filtering" and "Contents filtering". The full text of each article was reviewed to eliminate the article that was not actually related to recommender systems. Many of articles were excluded because the articles such as Conference papers, master's and doctoral dissertations, textbook, unpublished working papers, non-English publication papers and news were unfit for our research. We classified articles by year of publication, journals, recommendation fields, and data mining techniques. The recommendation fields and data mining techniques of 187 articles are reviewed and classified into eight recommendation fields (book, document, image, movie, music, shopping, TV program, and others) and eight data mining techniques (association rule, clustering, decision tree, k-nearest neighbor, link analysis, neural network, regression, and other heuristic methods). The results represented in this paper have several significant implications. First, based on previous publication rates, the interest in the recommender system related research will grow significantly in the future. Second, 49 articles are related to movie recommendation whereas image and TV program recommendation are identified in only 6 articles. This result has been caused by the easy use of MovieLens data set. So, it is necessary to prepare data set of other fields. Third, recently social network analysis has been used in the various applications. However studies on recommender systems using social network analysis are deficient. Henceforth, we expect that new recommendation approaches using social network analysis will be developed in the recommender systems. So, it will be an interesting and further research area to evaluate the recommendation system researches using social method analysis. This result provides trend of recommender system researches by examining the published literature, and provides practitioners and researchers with insight and future direction on recommender systems. We hope that this research helps anyone who is interested in recommender systems research to gain insight for future research.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.2
• /
• pp.20-33
• /
• 2020

This study aims to examine the trends in the preservation of urban public parks with a focus on the international movement to acknowledge and preserve the heritage value of urban parks. First, the background in which the concept of "historic urban park" first appeared internationally, as well as the current situation were investigated. Then, the cases of the United Kingdom (UK), the United States (US), and Japan, all of which are already preserving and managing urban public parks, were analyzed. In the ICOMOS-IFLA Document on Historic Urban Public Parks, the International Council on Monuments and Sites (ICOMOS), which is a group of specialists dedicated to the conservation and management of cultural heritage, mentions that it is necessary to maintain the social, intangible, aesthetic, ecological, and civic values of historic urban public parks. In addition, according to ICOMOS, it is necessary to preserve elements of parks, such as space composition, topography, light, and environment. The UK, the USA, and Japan have their own unique characteristics for the background of preserving urban parks, the preservation system, the selection of parks to be preserved, and the elements to be preserved within the park. The UK has categorized parks into certain types from each period and has tried to preserve the common elements in each type. The US has selected the parks to preserve by determining the meaning of the parks itself considering multiple aspects, embracing not only the physical form of the parks, but also the culture, monumentality, and social values. Recently, Japan began the preservation of historic urban parks as a matter of policy and started to implement a preservation policy by investigating modern parks that are believed to be worth preserving. Specialists in cultural heritage preservation have argued that the method of preservation of historic urban parks must differ from that of other parks or gardens. Nonetheless, observing cases in these three countries showed that, regardless of their administrative and legal systems regarding cultural heritage and urban public parks, their policies were still limited to preserving only the physical elements of parks. The direction and methodology for the preservation of historic urban parks must be developed further and elaborated upon in terms of the evolving concept and definition of heritage. Urban parks are where various historic values are accumulated, connoting historical meanings dealing with the memories of the parks and the urban dwellers. This study found that, worldwide, park management has been carried out in a way that the historic values of parks are respected and preserved. This global trend in preserving the historic values of urban public parks has significant implications for the management of urban public parks in Korea that are being formed and renewed repeatedly.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.3
• /
• pp.355-362
• /
• 2016

Objectives: This study aimed to develop a tool for assessing foreigners' understanding of oral health information in Korea called the Test of Korean Functional Health Literacy in Dentistry(TOKFHLiD) and examined validity and reliability of the tool. The TOKFHLiD consists of two literacy assessment parts: Dental Information Sentence(DIS) aims to assess one's literacy of sentences containing oral health information. Dental Information Document(DID) aims to assess one's numeracy and literacy of documents containing oral health information. Methods: Twenty eight preliminary questions were developed based on various medical care literature such as the agreement to diagnosis and treatment and the treatment precautions. DID using 14 preliminary questions was developed based on the appointment card, the treatment schedule, and labels on oral care products. The 42 preliminary questions in the DIS and the DID were subsequently put through four separate expert reviews, in which questions with content validity score of less than 0.8(13/15 points) were corrected and modified by five dental experts and then were corrected for language errors by two Korean language experts. The preliminary assessment tool was tested on 153 Koreans, and ${\chi}^2$ test was performed on the ratio of respondents who comprehended each question, the ratio of respondents who chose the correct answer for each question with a significance level of 0.05. Results: Of the 42 preliminary questions, 1 question in DIS and 1 question in DID, for which the ratio of Korean respondents who chose the correct answers did not exceed the acceptable level of 80%, were excluded and a final assessment tool was completed with 40 questions. Conclusions: Following the development and application of the tool, examination of the TOKHLiD for validity and reliability revealed that this assessment tool is adequate for assessing oral health information literacy of foreigners who are using oral hygiene medical services in Korea.