• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.11-18
• /
• 1984

There are two different methods in the stability analysis of slopes depending upon the 1ocations and the types of assumed failure planes, which are the infinite slope analysis and the finite slope analysis. The infinite slope analysis is simple and easier in its application. However, since the method neglects the end effects and assumes the failure plane to be located at the shallow depth and parallel to the slope, the slopes to be analyzed by the method should be limited to a certain range. Thus, it is intended in this paper to define the infinite slopes whose stability may be analyzed by the infinite slope analysis. As a result, it is obtained that the method of infinite slope analysis may be applied to the slopes which have the ratio of the slope height to the depth of the failure plane of 9 or bigger.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.737-741
• /
• 2012

본 연구에서는 2011년 7월 27일 집중호우로 인한 서울시 우면산 산사태 지역을 대상으로 뿌리의 보강효과와 분포형 습윤지수를 고려한 GIS기반의 무한사면안 해석기법을 이용하여 사면안정해석을 실시하였다. 사면안정해석을 위한 지형 지질학적 매개변수는 수치지도, 정밀토양도 및 임상도(임상도와 영급도)로부터 추출하여 $10m{\times}10m$ 해상도의 공간분 포형 데이터베이스로 변환하였다. 또한, 분포형 습윤지수의 산정을 위한 비집수면적(specific catchment area)은 무한방향흐름 기법(IFD, infinity flow direction)을 이용하여 결정하였으며, 모형의 입력 강우자료는 서울시 서초와 남현 AWS의 산사태 발생초기와 종기시의 평균 일강우량을 적용하였다. 대상유역의 사면안정해석을 위해 격자별 안전률은 4개의 등급(unstable, quasi stable, moderately stable, stable)으로 구분하여 도시하였다. 산사태 발생인자별 분석결과, 무한사면안정해석기법을 이용하여 산정된 사면안전률은 사면경사에 매우 민감하게 반응하는 것으로 분석되었으며, 거주지 주변의 절개지 부근과 산지정상부근의 급경사지에서 불안정 지역이 집중적으로 분포하고 있음을 확인하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.13-24
• /
• 2016

The safety factor of an infinite slope tends to be analyzed as lower when the effects of root cohesion are not considered into the equation. Thus, it is essential to consider regional characteristics such as root cohesion and crown density in order to obtain a reasonable safety factor value. In this study, The safety factor of the landslide model, both before and after considering crown density and root cohesion, was calculated and a comparative analysis was carried out. The safety factor is increased by the effect of roots cohesion of the analysis results, the amount of increase in safety factor along the inclination of the slope angle has been analyzed with various things, the effect of reinforcing the roots cohesion, slope of the lower angle it was found that the higher the safety factor increase.

• The Journal of Engineering Geology
• /
• v.21 no.3
• /
• pp.247-257
• /
• 2011

In this study the infinite slope model, one of the physical landslide models has been suggested to evaluate the susceptibility of the landslide. However, applying the infinite slope model in regional study area can be difficult or impossible because of the difficulties in obtaining and processing of large spatial data sets. With limited site investigation data, uncertainties were inevitably involved with. Therefore, the probabilistic analysis method such as Monte Carlo simulation and the GIS based infinite slope stability model have been used to evaluate the probability of failure. The proposed approach has been applied to practical example. The study area in Boeun area been selected since the area has been experienced tremendous amount of landslide occurrence. The geometric characteristics of the slope and the mechanical properties of soils like to friction angle and cohesion were obtained. In addition, coefficient of variation (COV) values in the uncertain parameters were varied from 10% to 30% in order to evaluate the effect of the uncertainty. The analysis results showed that the probabilistic analysis method can reduce the effect of uncertainty involved in input parameters.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.175-184
• /
• 2020

In Korea, there are many regulations and cases for horizontal seismic coefficient to pseudo-static analysis of slope, but there are insufficient regulations and cases for vertical seismic coefficient. Therefore, geological investigation and laboratory tests were conducted to analyze the effect of the vertical seismic coefficient on slope stability, and pseudo-static analyses based on infinite slope stability analysis were performed by using those results. As a result, if the earthquake magnitude is less than M 5.0, the effect of the vertical seismic coefficient is not significant, and if the earthquake magnitude is more than M 6.0, the vertical seismic coefficient largely increases the unstable areas of Fs ≤ 1.1. These tendency is more distinct in rainfall condition than without rainfall condition.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.643-656
• /
• 2012

There has been an increase for the landslide areas and restoration expenses due, in large part, to the increased locally heavy rains caused by recent climate change as well as the reckless development. This study carried out a slope stability analysis by the application of distributed wetness index, using the GIS-based infinite slope stability model, which took the root cohesion effect into consideration, for part of Mt. Umyeon in Seoul, where landslide occurred in July 2011, in order to compensate the defects of existing analysis method, and subsequently compared its result with the case on the exploitation of lumped wetness index. In addition, this study estimated the distributed wetness index by methodology, applying three methods of specific catchment area calculation: single flow direction (SFD), multiple flow direction (MFD), and infinity flow direction (IFD), for catchment area, one of the variables of distributed wetness indices, and finally implemented a series of comparative analysis for slope stability by methodology. The simulation results showed that most unstable areas within the study site were dominantly located in cutting-area surroundings along with the residential area and the mountaintop and unstable areas of IFD and lumped wetness index method were similar while SFD and MFD provided smaller unstable areas than the two former methods.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.11-18
• /
• 2007

Slope failure triggered by rainfall produces severe effects on the serviceability and stability of railway, Therefore, slope stability problem is one of the major concerns on the operation of railway. In this study, the rainfall conditions triggering slopes failure adjacent to railroads are investigated and the numerical analysis approach in consideration of infiltration and limit equilibrium method based upon multiple slip surfaces are proposed. The rainfall conditions triggering slope failure are as follow: cumulative rainfall is in the range of 150~500 mm, and duration is from 3 to 24 hours. Base upon the rainfall conditions, infiltration analysis and limit equilibrium method for infinite slope condition are carried out. The depth of infinite slope is assumed as 2 m and the multiple slip surfaces modeled with 16.7 cm interval from the bottom slip surface located at the 2 m depth. The assumed bottom slip surface is the location at which factor of safety is converging. The proposed approach shows more reasonable results than the results from the general codes assuming water table at slope surface. In addition, three dimensional plot of cumulative rainfall, rainfall duration, and factor of safety shows that slope stability analysis in consideration of rainfalll must account for cumulative rainfall (rainfall duration).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.33-33
• /
• 2016

산사태 발생 예측은 재해를 예방하고 대처하기 위한 가장 근본적이며 효과적인 방법이나, 과학기술의 발전과 많은 노력에도 불구하고 아직 산사태의 발생 장소와 시기를 예측하는 것은 매우 어려운 일이다. 산사태 발생 예측 기법은 크게 경험론적 지수기법, 통계적 해석기법, 물리적 해석 기법으로 나뉠 수 있다. 이 세 방법은 각기 장단점이 있으나 일반적으로 후자로 갈수록 많은 데이터가 요구되고, 해석에 시간이 필요하며, 보다 신뢰할만한 결과를 도출할 수 있다. 경험론적 지수 기법은 국내에서 실무적으로 널리 활용되고 있으며, 통계적 해석기법에 관한 연구도 수행된 바 있다. 하지만 이 두 방법론은 일정량 또는 일정강도 이상의 강우 발생 시 산사태의 발생 위험도를 공간적으로 예측할 수 있으나, 산사태의 발생 시점과 연속적인 강우량 또는 강우강도의 관계를 정량적으로 분석하기 힘든 한계가 있어 최근에는 이러한 한계를 극복하기 위해 최근 무한사면안정 모형과 토양수분침투 모형을 결합한 시변 사면안정모형들이 활용되기 시작하고 있다. 대표적으로는 TRIGRS가 있으며, 이 모형에서는 선형화한 1차원 Richards 방정식의 해석해를 활용하여 토양수분량을 계산한 후 이 정보를 무한사면안정모형에 반영하여 시변적인 사면안정도를 구하고 있다. 하지만 Richards 방정식을 선형화하기 위해서 제한된 토양수분-압력 관계식이 사용되며, GUI가 제공되지 않아 전처리 및 후처리가 번거로운 한계가 있다. 본 연구에서는 이러한 한계를 개선하기 위해 3차원 Richards방정식을 수치적으로 계산하여 보다 다양한 토양수분-압력 모형과 초기조건을 반영할 수 있게 하였다. 또한 GUI를 지원하여 사용자가 보다 손쉽게 해석모형을 사용할 수 있도록 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.5-15
• /
• 2013

In this paper, the unsaturated slope stability analysis considering suction stress (Lu and Godt, 2008) was introduced and the results applied for a certain sand slope were analyzed. The unsaturated slope stability analysis considering suction stress can analyze both conditions of steady infiltration and no infiltration, and it can estimate the safety factor of slope as a function of soil depth. Also, the influence of weathering phenomenon at a certain depth from the ground surface can be considered. The stability analysis considering suction stress was applied to the unsaturated infinite slope composed of sand with the relative density of 60%. The suction stress under no infiltration condition was affected by ground water table until a certain influencing depth. However, the suction stress under steady infiltration condition was affected by seepage throughout the soils. Especially, the maximum suction stress was displayed around ground surface. The factor of safety in the infinite slope under no infiltration condition rapidly increased and decreased within the influence zone of ground water table. As a result of slope stability analysis, the factor of safety is less than 1 at the depth of 2.4 m below the ground surface. It means that the probability of slope failure is too high within the range of depths. The factor of safety under steady infiltration condition is greater than that under no infiltration condition due to the change of suction stress induced by seepage. As the steady infiltration rate of precipitation was getting closer to the saturated hydraulic conductivity, the factor of safety decreased. In case of the steady infiltration rate of precipitation with $-1.8{\times}10^{-3}cm/s$, the factor of safety is less than 1 at the depths between 0.2 m and 3 m below the ground surface. It means that the probability of slope failure is too high within the range of depths, and type of slope failure is likely to be shallow landslides.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.193-210
• /
• 2013

This study aims to assess the slope stability variation of Jeollabuk-do drainage areas by RCM model outputs based on A1B climate change scenario and infinite slope stability model based on the specific catchment area concept. For this objective, we downscaled RCM data in time and space: from watershed scale to rain gauge scale in space and from monthly data to daily data in time and also developed the GIS-based infinite slope stability model based on the concept of specific catchment area to calculate spatially-distributed wetness index. For model parameterization, topographic, geologic, forestry digital map were used and model parameters were set up in format of grid cells($90m{\times}90m$). Finally, we applied the future daily rainfall data to the infinite slope stability model and then assess slope stability variation under the climate change scenario. This research consists of two papers: the first paper focuses on the methodologies of climate change scenario preparation and infinite slope stability model development.