• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.1
• /
• pp.55-60
• /
• 2006

헬리콥터와 같은 전통적인 수직이착륙항공기는 이착륙시 활주로가 필요로 하지 않는 장점이 있으나 고 속비행 및 고고도 성능에 있어서는 고정익기에 뒤떨어진다. 고효율의 엔진개발에 따라 고정익 항공기가 최 대속도 및 성능이 비약적으로 발전한대 비해, 헬리콥터의 최대속도는 160 ~170 kts (300~315 km/h) 수 준으로 제한되어왔고 장거리 운항에서 필수적인 고고도 운항능력에 있어서도 4km 이상의 고도에서 효율 적인 비행을 수행하는 데에는 한계가 있다. 이를 극복하기 위해 지난 반세기 동안 다양한 신개념 비행체 연 구가 수행되었다. 스마트무인기기술개발사업단에서는 항공선진국의 이러한 연구개발동향 및 그 결과를 종 합하여 미래적 신개념 비행체 대안을 모색하였고, 그 결과 틸트로터 개념을 선정하여 상세설계를 종료한 상태이다. 이러한 경과에 대한 요약과 현재 활발히 진행중인 항공선진국의 미래형 수직이착륙 항공기 개발 기종의 현황, 성능비교를 통해 고속, 고고도 수직이착륙 항공기 개발에 관한 세계적 추세와 본 사업의 연관 성을 고찰해 보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.52-56
• /
• 2011

Recently, KARI(Korea Aerospace Research Institute) has been developing a modern 11.5m diameter four bladed bearingless main rotor system, and this rotor system can be used for 7,000lb class helicopter. Flexbeam and torque tube can be considered as the key structural components, and large elastic twist of flexbeam induced by pitch control motion of torque tube can influence the nonlinear aeroelastic behavior. In this paper, the dynamic characteristic analysis results of bearingless rotor system were presented. In order to construct a input model and validate the analysis procedures, calculated results using the comprehensive helicopter analysis program CAMRAD II were compared with the measured natural frequencies and lag damping data from small-scale wind tunnel test. Next, the analysis model was extended to a full-scale model, and the dynamic analysis results were presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.187-192
• /
• 2012

Recently, KARI(Korea Aerospace Research Institute) has been developing a modern 11.5 m diameter four bladed bearingless main rotor system, and this rotor system can be used for 7,000 lb class helicopter. Flexbeam and torque tube can be considered as key structural components, and large elastic twist of flexbeam induced by pitch control motion of torque tube can influence the nonlinear aeroelastic behavior. In this paper, the dynamic characteristic analysis results of bearingless rotor system were presented. In order to construct a input model and validate the analysis procedures, calculated results using the comprehensive helicopter analysis program CAMRAD II were compared with the measured natural frequencies and lag damping data from small-scale wind tunnel test. Next, the analysis model was extended to a full-scale model, and the dynamic analysis results were presented.

• 한국항공운항학회:학술대회논문집
• /
• 2006.05a
• /
• pp.71-74
• /
• 2006

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.333-334
• /
• 2011

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.64-71
• /
• 2006

For SUAV is required to have the capacity of VTOL and fast forward flight, the SUAV development program has decided to adopt the tiltrotor mechanism which includes helicopter and turboprop mechanisms. From the engine point of view, the key engine parameters such as engine operating mechanism, engine control scheme, the dynamics characteristic of power train, engine intake/exhaust concept, and engine installation requirements should fulfill the requirements of the two different mechanisms, helicopter and turboprop. And for the maximum efficiency of the rotor, rotational speed for the two modes are 20% different, the power train shall find a way to make it so. Meeting these specific requirements for the tiltrotor mechanism, this research begins with a conventional OTS(off-the-shelf) turboshaft engine survey and minimizes engine modification to develop an economical propulsion system. The engine technical review has been performed on the basis of those requirements and capabilities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.88-93
• /
• 2003

This Paper described the simulation program development for helicopter. In the design of flight control system to accomplish some special missions like UAV, it is important to minimize the execution time obtaining a linear model from nonlinear model that is used for design of controller. The first step for this kind of purpose is to complete a nonlinear model that contains full dynamic characteristics. The second step is to get the trim values that are obtained from the nonlinear model by solving an algebraic equation. And then stability and control derivatives are derived through hovering to forward flight by numerical perturbation that will be used for linear model for a specified flight condition. The software program(HeliSim) is developed by using MATLAB GUI and will provide easy modeling procedure. The suggested method in this paper is much more simpler than any other method like a fully scale helicopter model. The advantage of our suggested method will reduce the computational time due to simple formula to extract a linear model from nonlinear model that will be beneficially used for flight control system of unmanned helicopter by some reduction of computational load.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.56-64
• /
• 2005

It is prerequisite that we have to fomulate the nonlinear mathematical modeling to design the guidance and control system of rotorcraft-based unmanned aerial vehicle using a small-scaled commercial helicopter. The small-scaled helicopters are very different from the full-scale helicopters in dynamic behavior such as high rotation speed and high frequency dynamic characteristics. In this paper, the formulation of the mathematical model of the small-scaled helicopter to minimize the complexity is presented by component and source build-up approach. It is linearized at the trim condition of hovering and forward flight and analyzed the flight modes. The results of this approach have general trends but a little difference. To verify this approach, it is necessary to compare this theoretical model with experimental results by system identification using flight test as a next research topic.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.19-26
• /
• 2012

The requirement for the aerodynamic hub drag, allocated from the system requirement of development of a bearingless rotor hub, was analyzed and embodied to be substantiated by the methodology assigned from the requirement. Drag prediction for the initial hub configuration was carried out by hand calculation using aerodynamic drag coefficients and the design change about the sectional shape of torque tube was suggested to satisfy the requirement. Finally, drag prediction was performed for the changed hub configuration by using unstructured overset mesh technique and parallel computation and the calculated result satisfied the requirement of the aerodynamic hub drag. It was found that the drag of final hub configuration was also within the range of drag inferred from the trendline of developed helicopter.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.131-138
• /
• 2013

The precision aerial application of small farms, such as paddy, upland and orchard fields using agricultural unmanned helicopters became a new paradigm. The objective of this study was to evaluate the performance of a GPS module and algorithm, controlling drift of agricultural helicopter by the crosswind and maintaining the position for emergency landing. Purpose of the drift control, of which an algorithm works while hovering is related with the emergency sequence that coping with abnormal conditions of rotorcraft system. However, the inertial attitude control cannot detect a drifting motion of fuselage moving at the constant velocity, thus the crosswind takes the helicopter away from the landing position. Performance of the drift control module, based on the GPS that a hovering position did not deviate within 5m in diameter, were tested and evaluated. Initially, the reaction against a disturbing gust wind was sensitive, soon the helicopter maintained its locking position and azimuth within 5m in diameter. It was, however, difficult for the helicopter to recognize the swaying and nodding, the some deviation was expected due to the discrepancy characteristics of the GPS signal. The performance of the drift control proved the effectiveness of the module to maintain the position against an unintended drift during the emergency landing or hovering.