• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.682-693
• /
• 1988

In this paper, a method of dynamic modeling is proposed for a hydraulic power transmission with Merrite-Wilson gear train and a computer simulation program for dynamic analysis of the power transmission is developed. Using this computer program the transient characteristics during the gear change are observed and the influence of transmission design parameters and hydraulic control parameters are analysed. Through this result of study a criteria for the good shift quality is derived.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1084-1085
• /
• 2023

현재 국내 항만에서의 작업은 대부분 수작업으로 진행되기 때문에 다양한 안전사고 발생과 시간 및 비용 등의 손실이 우려된다. 이를 해소하고자 최적경로 알고리즘을 이용한 AGV 차량 및 자동화 크레인으로 무인 스마트 항만을 제안한다. RFID 인식으로 컨테이너의 정보를 확인하고, 각 경로의 노드 정보가 담긴 QR 코드 인식을 통해 최적으로 목적지에 달성하는 것이 핵심이다. 본 논문은 이러한 기능으로 시간 및 비용 절감, 효율 상승과 인명피해 및 안전사고 예방을 목표로 한다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.05a
• /
• pp.103-112
• /
• 2005

자동화 컨테이너 터미널의 생산성을 향상시키기 위해서는 장치장과 안벽 사이를 오가며 컨테이너를 운반하는 무인유도 차량(Automated Guided Vehicle: AGV)들이 효율적으로 주행하여 제 시간에 필요한 위치에 도착함으로써 연계 작업들의 지연을 최소화하여야 한다, 만일 AGV들이 목적지까지 주행하여야 하는 거리가 길거나 주행 중에 다른 AGV들과의 충돌이나 교축을 피하기 위하여 대기하여야 하는 상황이 빈번히 발생하면 주행 효율이 떨어지게 된다, 주행 경로의 길이를 줄이기 위하여 경로들을 보다 유연하게 설정할 수 있게 허용하면 경로들간의 교차 가능성이 높아져 교통 통제가 어려워지고 결과적으로 충돌과 교착이 발생할 가능성은 높아진다. 특히 교착을 사전에 방지하기 위하서는 문제가 발생할 소지가 있는 영역을 미리 파악하여 일부 영역을 다른 AGV들이 점유하지 못하도록 제한하여야 하는데, 이는 자칫 AGV 주행 공간의 활용도를 떨어뜨릴 수 있다. 또한 교착의 파악과 이를 방지하기 위한 제어는 실시간에 이루어져야 하므로 연산 부담이 상당하다. 본 논문에서는 유연한 주행 경로 설정이 가능하며 주행 공간을 효율적으로 활용할 수 있는 주행 경로 표현법과 충돌 방지 방안을 제안한다. 또한 교착 발생 가능성을 사전에 파악하고 회피(avoidance)하는데 소요되는 연산비용을 줄여 실시간 적용 가능성을 높이기 위하여 교착해결(deadlock resolution)에 기반을 둔 AGV 주행 관리 방안을 제시한다. 본 논문에서 제안하는 방안의 효율성을 시뮬레이션을 통하여 검증해 보았다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.433-434
• /
• 2022

물류 시설에서 사람이 직접 물류를 입출고하는 방식이 일반적이다. 본 연구에서는 물류의 입출고를 인력의 소모 없이 보다 안전하고 효율적으로 하는 것을 전제로 하여 스마트 팩토리 산업에 사용되는 AGV 시스템에 물류 입출고 시스템을 접목하고자 한다. 본 논문은 기존의 인력의 소모와 산업재해 위험이 있는 물류 시설 근로 환경에 AGV를 이용, 인력의 소모를 줄여 물류 입출고 프로세스를 무인화하고자 "AGV 물류 자동화 시스템"을 제안한다. AGV 물류 자동화 시스템은 적외선 센서를 이용해 라인 트레이서를 구현하여 원하는 위치로 AGV를 이동시키고 각종 모터로 물품의 입출고 임무를 수행하도록 한다. 스마트폰의 물류 관리 어플리케이션을 통해 AGV의 제어와 물품의 재고 파악이 가능하도록 하여 물류관리의 효율성과 편의성을 증대시켰다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.218-219
• /
• 2011

This paper focuses on dispatching strategy for AGVs(Automated Guided Vehicle). The goal of AGV dispatching problem is allocating jobs to AGVs to minimizing QC delay and AGV total travel distance. Due to the highly dynamic nature of container terminal environment, the effect of dispatching is hard to predict thus it leads to frequent modification of dispatching results. Given this situation, single rule-based approach is widely used due to its simplicity and small computational cost. However, single rule-based approach has a limitation that cannot guarantee a satisfactory performance for the various performance measures. In this paper, dispatching strategy based on multicriteria heuristics is proposed. Proposed strategy consists of multiple decision criteria. A muti-objective evolutionary algorithm is applied to optimize weights of those criteria. The result of simulation experiment shows that the proposed approach outperforms single rule-based dispatching approaches.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.501-507
• /
• 2011

This paper focuses on dispatching strategy for AGVs(Automated Guided Vehicle). The goal of AGV dispatching is assigning AGVs to requested job to minimizing the delay of QCs and the travel distance of AGVs. Due to the high dynamic nature of container terminal environment, the effect of dispatching is hard to predict thus it leads to frequent modification of dispatching decisions. In this situation, approaches based on a single rule are widely used due to its simplicity and small computational cost. However, these approaches have a limitation that cannot guarantee a satisfactory performance for the various performance measures. In this paper, dispatching strategy based on multicriteria heuristics is proposed. The Proposed strategy consists of multiple decision criteria. A multi-objective evolutionary algorithm is applied to optimize weights of those criteria. The result of simulation experiment shows that the proposed approach outperforms single rule-based dispatching approaches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2349-2354
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.355-358
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.105-114
• /
• 2001

In this study, a shift control algorithm far improving the shift quality of a parallel hybrid drivetrain with an automated manual transmission (AM) is proposed. The general AMT requires the sophisticated control of clutch in the clutch engagement to improve its shift characteristics, and that is generally known to be difficult. But in this hybrid drivetrain, we can control the speeds of clutch plates by engine and motor control, and it provides the easier clutch control in shift process than general AMT. Additionally, it permits the much-reduced shift shock. The motor control during the shift period is also to achieve reduced velocity drop of the vehicle in comparison with that of a general AMT. Furthermore various dynamometer-based experiments are carried out to prove the validity of the proposed shift control algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.96-106
• /
• 1999

In this study, the advanced shift control algorithm for parallel type hybrid drivetrain system with automated manual transmission(AMT) is proposed. The AMT can be easily realized by mounting the pneumatic actuators and sensors on the clutch and shift levers of the conventional manual transmission. By using the electronic-controlled AMT, engine and induction machine, it is possible to achieve the integrated control of overall system for the efficiency and the performance of the vehicle. Performing the speed control of the induction machine and the engine, the synchronization at gear shifting and the smooth engagement of clutch can be guaranteed. And it enables to reduce the shift shock and shorten the shift time. Hence, it results in the improvement of shift quality and the driving comfort of the vehicle. Dynamometer-based experiments are carried out to prove the validity of the proposed shift control algorithm.