• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2015년도 추계학술대회
• /
• pp.55-58
• /
• 2015

고고도 장기체공 무인기는 일반적인 무인기와 달리 고고도에서의 환경과 장시간의 체공에 따른 위험도가 높을 수밖에 없다. 따라서 신뢰도를 높이기 위한 다양한 방안을 강구해야 한다. 가장 중요한 요소 중 하나가 비행제어시스템이며, 본 논문에서는 비행제어시스템의 이중화에 따른 설계결과와 비행시험결과를 기술하였다.

• Journal of Aerospace System Engineering
• /
• 제14권5호
• /
• pp.49-57
• /
• 2020

The KC-100 has completed civil type certification with the Ministry of Land, Infrastructure, and Transport, and is currently under development as an unmanned aerial vehicle as part of the Ministry of Land, Infrastructure, and Transport. The Certification Technology of small Unmanned Airplane system (CTsUA system), which is an unmanned KC-100, is being developed to enable the installation of heavy-duty mission equipment and long-time flight missions. This study investigated the process and results of analyzing various parameters such as aircraft weight, airspeed, flight altitude, required horsepower, and fuel consumption at each stage to construct a mission profile based on the operational concept of the CTsUA system. To maintain a maximum take-off weight of 3,600 lbs (1,633 kg), the analysis determined that the weight of the application equipment for the unmanned system should be kept below 80 lbs (36 kg).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제33권11호
• /
• pp.33-40
• /
• 2005

The reliability of flight control system(FCS) for Unmanned Air Vehicle(UAV) is underestimated because of the design restrictions such as small size, low cost and light weight. However because the failure of FCS may cause the loss of aircraft, the reliability of FCS must be analysed and validated whether it meet the reliability requirements in design phase.In this paper the failure rate of subsystems was divided with its function based on the design experience of FCS. The redundancy models which satisfy the system reliability requirements were suggested. These results may be utilized in the hardware design of FCS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제45권2호
• /
• pp.133-139
• /
• 2017

Flight control computer of tiltrotor UAV was designed by redundancy system with primary and secondary channels to improve reliability. The redundancy functions consist of channel switching and data recovery. The channel switching function consists of software method by using cross channel data link and hardware method by using watchdog timer. The data recovery is the function to maintain flight condition when the flight control computer is restarted exceptionally in operation. The redundancy system was verified by flight control computer bench test, system integration test and HILS test. This paper describes the redundancy function of tiltrotor UAV flight control computer and test-verification method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 한국컴퓨터정보학회 2019년도 제59차 동계학술대회논문집 27권1호
• /
• pp.381-382
• /
• 2019

본논문에서는 산업용 드론개발을 위한 안정성 향상에 대하여 연구하였다. 기존의 비행체의 경우 고신뢰도 대용량의 제어시스템을 이용하여 비행제어시스템을 구성하지만 무인 비행체는 소형 내장형시스템을 이용한다. 본 연구에서는 소형 무인 비행체에서 사용하는 소형 내장형 비행제어시스템에서 안정성을 개선하기 위한 방법으로 비행제어신호와 모터의 제어신호를 측정하여 안정상태와 이상상태를 구별한다. 제안한 방법은 기존의 비행제어시스템을 수정하지 않고 비행제어시스템의 감시가 가능 할 것으로 예상한다.

• Journal of Intelligence and Information Systems
• /
• 제11권3호
• /
• pp.45-55
• /
• 2005

In this paper, we propose a method to a synchronization of chaotic UAVs(Unmanned Aerial Vehicle) that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. The proposed methods are assumed that if one of two chaotic UAVs receives the synchronization command, the other UAV also follows the same trajectory during the chaotic UAVs search on the arbitrary surface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제50권5호
• /
• pp.349-357
• /
• 2022

Since the flight control computer of unmanned aerial vehicle (UAV) is a flight critical equipment, it is necessary to ensure reliability and safety from the development step, and a redundancy-based fault management design is required in order to operate normally even a failure occurs. To reduce cost, weight and power consumption, the dual-redundant flight control system design is considered in UAV. However, there are various restrictions on the fault management design. In this paper, we propose the fault detection and isolation designs for the dual-redundant flight control computer to satisfy the safety requirements of an UAV. In addition, the flight control computer developed by applying the fault management design performed functional tests in the integrated test environment, and after performing FMET in the HILS, its reliability was verified through flight tests.

• Journal of Aerospace System Engineering
• /
• 제17권1호
• /
• pp.79-87
• /
• 2023

To design a control law of an aircraft, an accurate aircraft dynamic model is required. To obtain an aerodynamic database (DB) to build a dynamic model, a large number of wind tunnel tests are typically required. However, when flight test data of target aircraft exist such as in the process of unmanned conversion of a manned aircraft, an aircraft dynamic model can be obtained through a parameter estimation method and a DB tuning procedure. This paper describes a nonlinear model construction process and a verification method for KC-100 OPV aircraft. Flight data compatibility analysis was performed to determine suitability of the estimation method application. Linear model estimation was performed using the maximum likelihood estimation method. Results of aerodynamic DB tuning process and verification applying the FFS standard to the nonlinear model constructed are presented.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.163-165
• /
• 2001

본 연구개발은 입력된 항로를 스스로 비행하며 사진 촬영, 국토 및 환경을 감시ㆍ관리할 수 있는 지능형 무인 비행 시스템 개발을 위한 레저 산업용 무선 조종 모형 비행기에 관련된 핵심기술을 확보하고, 상업화를 위한 전 단계의 시작품을 제작하는 것이다. 이와 관련하여 무선 조종 비행 관련 데이터를 확보 및 습득하고, 이의 활용으로 표준조종 기술을 확립하도록 했다. 또한, 자동 비행모드로 전환하기 위한 자동 비행 제어 알고리즘을 개발했으며, 확보된 비행기술을 데이터화하여 다양한 환경에서 시뮬레이션(simulation)을 수행한 정보를 프로그램화하여 자동 비행을 하도록 하고, 마이크로프로세서(microprocessor)를 이용하여 서보모터를 구동할 수 있는 제어기를 개발하였다.

• Journal of Convergence for Information Technology
• /
• 제9권11호
• /
• pp.118-124
• /
• 2019

As Unmanned Aerial Vehicles technology has been widespread, various types of unmanned aircraft and mission equipment have been developed in line with mission diversification. Especially in Korea, small unmanned aerial vehicles have been actively developed. In addition, flight control system and mission equipment interface system for effective control of small unmanned aerial vehicles, efficient communication system configuration and operation for transmission to ground operated systems by processing data are required. This paper addresses efficient system structure and operation of communication equipment for missions and control of small unmanned aerial vehicles.